journal article·2010-12

Bulk heterojunction solar cells with NiO hole transporting layer based on AZO anode

Nanhai Sun, Guojia Fang, Pingli Qin, Qiao Zheng, Mingjun Wang, Xi Fan, Fei Cheng, Jiawei Wan, Xingzhong Zhao

Publisher page

Abstract

Abstract We report efficient bulk-heterojunction [regioregular of poly(3-hexylthiophene) (P3HT):(6,6)-phenyl C 61 butyric acid methyl ester (PCBM)] solar cells with a highly transparent and electrical conductive NiO film as hole transporting layer (HTL) on optimized Al doped zinc oxide (AZO) substrate. The highest power conversion efficiency (PCE) of 3.15% of AZO/NiO/P3HT:PCBM/Al solar cells was achieved through NiO nano-layer sputtering O 2 /Ar flow ratio, film thickness optimization and it was found that room temperature sputtered NiO at an O 2 /Ar ratio of 3:7 and with a thickness of 10 nm shows the best photovoltaic properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. Analysis of the failure mechanism for a stable organic photovoltaic during 10000h of testing10.1002/pip.794 ↗
3. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
4. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
5. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
6. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
7. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Electrical and optical properties of TCO–Cu2O heterojunction devices10.1016/j.tsf.2004.06.180 ↗
10. Carrier concentration dependence of band gap shift in n-type ZnO: Al films10.1063/1.2721374 ↗
11. Synthesis and local structure of doped nanocrystalline zinc oxides10.1063/1.2349430 ↗
12. Highly conductive and transparent aluminum-doped zinc oxide thin films prepared by pulsed laser deposition in oxygen ambient10.1063/1.1415544 ↗
13. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
14. Transparent conducting oxides for photovoltaics10.1557/mrs2007.29 ↗
15. Electrical properties of transparent and conducting Ga doped ZnO
16. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
17. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
18. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
19. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
20. Efficient tandem organic solar cells with an Al/MoO3 intermediate layer10.1063/1.2976126 ↗
21. Influence of substrate temperature on electrical and optical properties of p-type semitransparent conductive nickel oxide thin films deposited by radio frequency sputtering10.1016/j.apsusc.2007.09.051 ↗
22. Deposition and properties of nickel oxide films produced by DC reactive magnetron sputtering10.1016/S0042-207X(98)00190-0 ↗
23. Ultraviolet electroluminescence from ZnO/NiO-based heterojunction light-emitting diodes10.1063/1.3176440 ↗