journal article·2015-01

Influence of moisture out-gassing from encapsulant materials on the lifetime of organic solar cells

Hasitha C. Weerasinghe, Scott E. Watkins, Noel Duffy, David J. Jones, Andrew D. Scully

Publisher page

Abstract

Abstract The results of a study on the effects of encapsulant pre-conditioning (drying) on the durability of “conventional” and “inverted” bulk-heterojunction organic solar cells based on P3HT:PCBM are presented. The architectures of the conventional and inverted devices were ITO/PEDOT:PSS/P3HT:PCBM/Al and ITO/ZnO/P3HT:PCBM/MoO 3 /Ag, respectively. Quantitative analysis of the moisture content, moisture out-gassing, and re-absorbing properties of flexible barrier encapsulant films under ambient conditions was conducted. The effect of moisture out-gassing from the encapsulation materials on device performance was studied and the lifetime of conventional and inverted devices was found to decline significantly for the devices encapsulated using materials without pre-conditioning. This study reveals the essential role of pre-conditioning of materials in the encapsulation of organic photovoltaic devices. Current-voltage characteristics exhibit a clear increase in the series resistance of the devices during storage under ambient conditions, and Spectroscopic Impedance analysis indicates that charge-transport resistance within the devices increases significantly during the degradation process. The results are consistent with the primary degradation mechanism being corrosion at the metal-electrode surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 10.2% Power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
4. Stability of polymer solar cells10.1002/adma.201104187 ↗
5. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
6. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells10.1016/j.solmat.2011.11.035 ↗
7. Degradation of bulk heterojunction solar cells operated in an inert gas atmosphere: a systematic study10.1016/S0379-6779(00)01504-6 ↗
8. Photooxidative stability of substituted poly(phenylene vinylene) (PPV) and poly(phenylene acetylene) (PPA)10.1002/(SICI)1097-4628(19980919)69:12<2451::AID-APP16>3.0.CO;2-# ↗
9. Reversible degradation of inverted organic solar cells by concentrated sunlight10.1088/0957-4484/22/22/225401 ↗
10. Effects of Photo-oxidation on the Performance of Poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene]:[6,6]-Phenyl C61-Butyric Acid Methyl Ester Solar Cells10.1002/adfm.200500714 ↗
11. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
12. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
13. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests10.1016/j.solmat.2013.10.023 ↗
14. Transparent ultrahigh-strength moisture barrier film fabricated by lamination process
15. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
16. G. Nisato, M. Kuilder, P. Bouten, L. Moro, O. Philips, N. Rutherford, P-88: Thin Film Encapsulation for OLEDs: Evaluation of Multi-layer Barriers using the Ca Test, in: SID Symposium Digest of Technical Papers, 34, 2003, pp. 550–553.10.1889/1.1832335 ↗
17. K. Yongjin, K. Namsu, K. Hyungchul, S. Graham, The development of thin film barriers for encapsulating organic electronics, in: Electronic Components and Technology Conference (ECTC), 2011 IEEE 61st, 2011, pp. 2101–2106.10.1109/ECTC.2011.5898808 ↗
18. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
19. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
20. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
21. Solution-processed sintered nanocrystal solar cells via layer-by-layer assembly10.1021/nl201282v ↗
22. Thin-film encapsulation of polymer-based bulk-heterojunction photovoltaic cells by atomic layer deposition10.1016/j.orgel.2009.07.008 ↗
23. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
24. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
25. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
26. Organic solar cells: A new look at traditional models10.1039/c1ee01663f ↗
27. Spatially resolved photocurrent measurements of organic solar cells: tracking water ingress at edges and pinholes10.1016/j.solmat.2012.10.027 ↗
28. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
29. Impedance spectroscopy as a probe for the degradation of organic light-emitting diodes10.1063/1.3294642 ↗
30. Cold isostatic pressing technique for producing highly efficient flexible dye-sensitised solar cells on plastic substrates10.1002/pip.1140 ↗
31. In situ characterization of lifetime and morphology in operating bulk heterojunction organic photovoltaic devices by impedance spectroscopy10.1002/aenm.201100357 ↗
32. Degradation and stability of polymer and organic solar cells10.1016/j.solmat.2008.01.016 ↗