Influences on the energy delivery of thin film photovoltaic modules
Source abstract
Abstract
The energy yield delivered by different types of photovoltaic device is a key consideration in the selection of appropriate technologies for cheap photovoltaic electricity. The different technologies currently on the market, each have certain strengths and weaknesses when it comes to operating in different environments. There is a plethora of comparative tests on-going with sometimes contradictory results. This paper investigates device behaviour of contrasting thin film technologies, specifically a-Si and CIGS derivatives, and places this analysis into context with results reported by others. Specific consideration is given to the accuracy of module inter-comparisons, as most outdoor monitoring at this scale is conducted to compare devices against one another. It is shown that there are five main contributors to differences in energy delivery and the magnitude of these depends on the environments in which the devices are operated. The paper shows that two effects, typically not considered in inter-comparisons, dominate the reported energy delivery. Environmental influences such as light intensity, spectrum and operating temperature introduce performance variations typically in the range of 2–7% in the course of a year. However, most comparative tests are carried out only for short periods of time, in the order of months. Here, the power rating is a key factor and adds uncertainty for new technologies such as thin films often in the range of 10–15%. This dominates inter-comparisons looking at as-new, first-year energy yields, yet considering the life-time energy yield it is found that ageing causes up to 25% variation between different devices. The durability of devices and performance-maintenance is thus the most significant factor affecting energy delivery, a major determinant of electricity cost. The discussion is based on long-term measurements carried out in Loughborough, UK by the Centre for Renewable Energy Systems Technology (CREST) at Loughborough University.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. IEC · 2005
2. High-confidence prediction of energy production from high-efficiency photovoltaic systems
3. Energy yield measurements at SUPSI—importance of data quality control and its influence on kWh/Wp inter-comparison
4. Energy delivery of PV devices—implementation of best practices for outdoor characterisation and testing
5. T.R. Betts, S.R. Williams, R. Gottschalg, Outdoor characterisation of PV modules for energy rating, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, WIP-Munich, Hamburg, 2009, pp. 3471–3474.
6. Comparison of Energy Production and Performance from Flat-Plate Photovoltaic Module Technologies Deployed at Fixed Tilt
7. Long-term performance degradation of various kinds of photovoltaic modules under moderate climatic conditions10.1002/pip.1005 ↗
8. Long-term performance modelling of amorphous silicon photovoltaic module10.1143/JJAP.36.629 ↗
9. Performance of thin film PV modules10.1016/j.tsf.2005.11.066 ↗
10. G. Makrides, B. Zinsser, G.E. Georghiou, M. Schubert, J.H. Werner, Outdoor efficiency of different photovoltaic systems installed in Cyprus and Germany, in: Proceedings of PVSC 2008 33rd IEEE Photovoltaic Specialists Conference, vol. 1–4, 2008, pp. 1951–1956.10.1109/PVSC.2008.4922830 ↗
11. Review of photovoltaic module energy yield (kWh/kW): comparison of crystalline Si and thin film technologies10.1002/wene.61 ↗
12. Long-term performance of amorphous silicon photovoltaic modules
13. The effect of cell thickness on energy production of amorphous silicon solar cells
14. G. Friesen, S. Dittmann, S.R. Williams, R. Gottschalg, H.G. Beyer, A. Guerin de Montgareuil, N. Van der Borg, A.R. Burgers, R. Kenny, T. Huld, B. Müller, C. Reise, J. Kurnik, M. Topic, Intercomparison of different energy prediction methods within the European project “Performance”—results of the 2nd round robin, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, WIP-Munich, Hamburg, 2009, pp. 3189–3197.
15. Changes in spectral response with temperature and irradiance10.1016/j.tsf.2003.11.006 ↗
16. IEC · 2011
17. IEC · 2006
18. Effect of cell width on the efficiency of thin film solar cells
19. C. Monokroussos, R. Rüther, R. Gottschalg, M.G. Kong, D.G. Infield, Effect of cell width on the device performance of amorphous silicon solar cells, in: Proceedings of the 19th Photovoltaic Solar Energy Conference, WIP-Munich, Paris, 2004, pp. 1489–1492.
20. Initial performance degradation of an a-Si/a-S tandem PV array
21. Robustness of energy yield measurements of photovoltaic modules
22. Uncertainty in photovoltaic performance parameters—dependence on location and material10.1016/j.solmat.2009.02.003 ↗
23. Uncertainty of solar simulator spectral irradiance data and problems with spectral match classification
24. Traceable performance characterization of state-of-the-art PV devices
25. Results from the second international module inter-comparison
26. PV module output power characterisation in test laboratories and in the PV industry—results of the european performance project
27. B. Zinsser, G. Makrides, M.B. Schubert, G.E. Georghiou, J.H. Werner, Rating of annual energy yield more sensitive to reference power than module technology, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 1095–1099.10.1109/PVSC.2010.5614705 ↗
28. T.R. Betts, M. Bliss, R. Gottschalg, D.G. Infield, Consideration of Error Sources for Outdoor Performance Testing of Photovoltaic Modules, in: Proceedings for the 20th European Photovoltaic Solar Energy Confrerence, Barcelona, 2005, pp. 2127–2130
29. D. Stellbogen, H.-D. Mohring, A. Jagomägi ,E. Mõttus, G. Friesen, D. Domine, F. Fabero, T. Betts, R. Gottschalg, T. Zdanowicz, M. Prorok, A. Guerinde Montgareuil, W. Herrmann, J.L. Martin, A. Guerinde Montgareuil, J. Merten, D. Faiman, Comparative outdoor characterisation of PV modules across Europe, Proceedings of the 25th Photovoltaic Solar Energy Conference, WIP, Valencia 3774–3778.
30. A comparison of the performance of different PV module types in temperate climates10.1016/j.solener.2003.07.026 ↗
31. Eikelboom · 2000
32. A power-rating model for crystalline silicon PV modules10.1016/j.solmat.2011.07.026 ↗
33. R. Gottschalg, J.A. del Cueto, T.R. Betts, S.R. Williams, D.G. Infield, Investigating the seasonal performance of A-Si single- and multi-junction modules, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, WIP-Munich, Osaka, 2003, pp. 2182–2185.
34. N. Veissid, A.M.D. Andrade, The I–V silicon solar cell characteristic parameters temperature dependence. an experimental study using the standard deviation method, in: Proceedings of the 10th European Photovoltaic Solar Energy Conference, WIP-Munich, Lisbon, 1991, pp. 43–47.10.1007/978-94-011-3622-8_11 ↗
35. R. Gottschalg, M. Rommel, D.G. Infield, Variation of solar cell equivalent circuit parameters under different operating conditions, in: Proceedings of the 14th European Photovoltaic Solar Energy Conference, WIP-Munich, Barcelona, 1997, pp. 2176–2179.
36. Influence of the measurement environment on the accuracy of the extraction of the physical parameters of solar cells10.1088/0957-0233/10/9/306 ↗
37. Modeling of thin film solar cells: uniform field approximation10.1063/1.331955 ↗
38. Effect of the recombination function on the collection in a p-i-n solar cell
39. Improved equivalent circuit and analytical model for amorphous silicon solar cells and modules10.1109/16.658676 ↗
40. D.L. King, W.E. Boyson, J.A. Kratochvil, Photovoltaic Array Performance Model, in, Sandia National Laboratories, Albaquerque, 2004, pp. 41.
41. Mapping the performance of PV modules, effects of module type and data averaging10.1016/j.solener.2009.12.002 ↗
42. G. Friesen, D. Chianese, N. Cereghetti, A. Bernasconi, Energy Rating Prediction Method - Matrix Method - Applied to CIS Modules, in: Proceedings of the 19th EU-PVSEC, Barcelona, WIP, 2004, pp. 1817–1819
43. Experimental investigation of spectral effects on amorphous silicon devices in outdoor operation
44. A critical appraisal of the factors affecting energy production from amorphous silicon photovoltaic arrays in a maritime climate10.1016/j.solener.2004.06.015 ↗
45. On the importance of considering the incident spectrum when measuring the outdoor performance of amorphous silicon photovoltaic devices10.1088/0957-0233/15/2/021 ↗
46. Output variation of photovoltaic modules with environmental factors—ii: seasonal variation
47. Performance charactersiation of photovoltaic modules
48. Temperature-induced changes in the performance of amorphous silicon multi-junction modules in controlled light soaking10.1002/(SICI)1099-159X(199903/04)7:2<101::AID-PIP247>3.0.CO;2-2 ↗
49. Seasonal variations in amorphous silicon solar module outputs and thin film characteristics10.1016/0927-0248(94)00165-O ↗
50. Metastable electrical characteristics of polycrystalline thin-film photovoltaic modules upon exposure and stabilization10.1117/1.JPE.2.022001 ↗
51. D.C. Jordan, S.R. Kurtz, Photovoltaic degradation rates—an analytical review, Progress in Photovoltaics: Research and Applications, 21 (2013), 12–29.10.1002/pip.1182 ↗
52. Photovoltaic module reliability model based on field degradation studies10.1002/pip.825 ↗
53. J. Zhu, Y. Qiu, T.R. Betts, R. Gottschalg, Effects of different data collection strategies on outdoor performance measurements and degradation, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, WIP-Munich, Hamburg, 2009, pp. 3439–3444.
54. Seasonal performance of a-Si single- and multijunction modules in two locations