Improvement of MoO3/Ag/MoO3 multilayer transparent electrodes for organic solar cells by using UV–ozone treated MoO3 layer
Source abstract
Abstract
Abstract Ultraviolet ozone (UVO) treatment of molybdenum trioxide (MoO3) appears to be a simple and efficient method for obtaining highly continuous and smooth silver (Ag) thin films in the thermally evaporated MoO3/Ag/MoO3 (MAM) multilayered structure as transparent electrodes for small-molecule organic solar cells (OSCs). It is observed that UVO treatment can oxidatively modify the non-stoichiometric MoO3 (or MoO3-x) surfaces, further increasing the Mo6+/Mo5+ composition ratio and work function of MoO3-x. Importantly, the use of UVO treatment for the MoO3 bottom layer effectively improves the wettability of Ag on MoO3 and enhances the lateral growth of Ag thin film, resulting in a reduction of the percolation threshold thickness of the continuous Ag layer. Due to the formation of an ultrathin Ag interlayer with a continuous and smooth surface morphology, the MAM multilayered electrode after UVO treatment of MoO3 for 3 min has excellent optical and electrical properties, including a high maximum transmittance of 89.1% and a low sheet resistance of 8.0 Ω/sq. When the optimal UVO-treated MoO3/Ag (7.5 nm)/MoO3 films are used as the anode in OSCs with the copper phthalocyanine (CuPc)/fullerene (C60) planar heterojunction structure, the OSCs have a power conversion efficiency of 0.55%, which is 2.0 and 1.2 times higher than that of devices with untreated MoO3/Ag (7.5 nm)/MoO3 (0.27%) and MoO3/Ag (10 nm)/MoO3 electrodes (0.46%), respectively, and competitive with that of indium-tin-oxide-based devices. Because of almost full surface coverage of the Ag interlayer, UVO treatment of MoO3 in MAM multilayered electrodes can improve charge carrier injection/extraction at the anode contact and hence improve the photovoltaic performance of OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. The future of organic photovoltaics10.1039/C4CS00227J ↗
2. Fabrication of polymer solar cells using aqueous processing for all layers including the metal back electrode10.1002/aenm.201000007 ↗
3. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b]thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Performance enhancement of polymer solar cells with high work function CuS modified ITO as anodes10.1016/j.orgel.2015.03.051 ↗
6. High-performance of PEDOT/PSS free organic solar cells on an air-plasma-treated ITO substrate10.1021/am4049964 ↗
7. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
8. Plasma damage-free sputtering of indium tin oxide cathode layers for top-emitting organic light-emitting diodes10.1063/1.1923182 ↗
9. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
10. Transparent conducting oxides for photovoltaics10.1557/mrs2007.29 ↗
11. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
12. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
13. Indium-free multilayer semi-transparent electrodes for polymer solar cells10.1016/j.solmat.2015.10.010 ↗
14. ZnO-Ag-MoO3 transparent composite electrode for ITO-free, PEDOT: PSS-free bulk-heterojunction organic solar cells10.1016/j.solmat.2013.07.009 ↗
15. Probing the highly transparent and conducting SnOx/Au/SnOx structure for futuristic TCO applications10.1039/C5RA24422F ↗
16. Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode10.1016/j.orgel.2012.05.047 ↗
17. The effect of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗
18. Improved performances of organic light-emitting diodes with metal oxide as anode buffer10.1063/1.2430511 ↗
19. Electronic structure of anode interface with molybdenum oxide buffer layer10.1016/j.orgel.2009.10.013 ↗
20. Energy level evolution of molybdenum trioxide interlayer between indium tin oxide and organic semiconductor10.1063/1.3309600 ↗
21. The structure of evaporated metal films and their optical properties10.1364/JOSA.40.000203 ↗
22. Optical percolation and nonlinearity of sputtered Ag Island films10.1364/OE.14.001541 ↗
23. Improvement of transparent metal top electrodes for organic solar cell by introducing a high surface energy seed layer10.1002/aenm.201200903 ↗
24. Ultrathin transparent Au electrodes for organic photovoltaics fabricated using a mixed mono-molecular nucleation layer10.1002/adfm.201002021 ↗
25. Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers10.1016/j.solmat.2013.05.026 ↗
26. UV/ozone cleaning of surfaces10.1116/1.573115 ↗
27. Dependence of indium–tin–oxide work function on surface cleaning method as studied by ultraviolet and x-ray photoemission spectroscopies10.1063/1.371859 ↗
28. Anode interfacial tuning via electron-blocking/hole transport layers and indium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
29. The effect of UV ozone treatment on Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)10.1063/1.3257382 ↗
30. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV–ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
31. Properties of MoO3 films by thermal oxidation: annealing induced phase transition10.1166/mex.2013.1114 ↗
32. Li-ion intercalation in thermal oxide thin films of MoO3 as studied by XPS, RBS, and NRA10.1021/jp800147f ↗
33. Influences of evaporation temperature on electronic structures and electrical properties of molybdenum oxide in organic light emitting devices10.1063/1.3309783 ↗
34. Aqueous solution-processed MoO3 thick films as hole injection and short-circuit barrier layer in large-area organic light-emitting devices10.7567/APEX.7.111601 ↗
35. Ultrathin metal films and particles on oxide surface: structural, electronic and chemisorptive properties10.1016/S0167-5729(96)00011-8 ↗
36. Combined AFM, XPS, and contact angle studies on treated indium–tin-oxide films for organic light-emitting devices10.1016/j.matlet.2006.12.063 ↗
37. Oxide surface cleaning by an atmospheric pressure plasma10.1016/j.surfcoat.2003.08.011 ↗
38. Optical effect of surface morphology of Ag on multilayer electrode applications for OLEDs10.1109/LED.2013.2293574 ↗
39. Surface-plasmon-induced light absorption on a rough silver surface10.1063/1.3537812 ↗
40. Efficient hole collection by introducing ultra-thin UV-ozone treated Au in polymer solar cells10.1016/j.solmat.2010.11.017 ↗
41. Enhanced surface roughness of organic coatings due to UV-degradation: an unknown source of EIS-artifacts10.1016/S0300-9440(03)00004-3 ↗
42. Uses of ultraviolet/ozone for hydrocarbon removal: applications to surfaces of complex composition or geometry10.1116/1.577626 ↗
43. Eliminating carbon contamination on oxidized Si surfaces using a VUV excimer lamp10.1016/j.tsf.2008.06.046 ↗
44. New figure of merit for transparent conductors10.1063/1.323240 ↗
45. The influence of donor material on achieving high photovoltaic response for organic bulk heterojunction cells with small ratio donor component10.1016/j.orgel.2013.01.026 ↗
46. Effect of temperature on the performance of CuPc/C60 photovoltaic device10.1088/0022-3727/42/1/015102 ↗
47. Charge accumulation induced S-shape J-V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗