journal article·2017-08

Controlled nucleation assisted restricted volume solvent annealing for stable perovskite solar cells

Md Arafat Mahmud, Naveen Kumar Elumalai, Mushfika Baishakhi Upama, Dian Wang, Faiazul Haque, Matthew Wright, Cheng Xu, Ashraf Uddin

Publisher page

Abstract

Abstract Here we report, a controlled primary nucleation aided restricted volume solvent annealing method [NR method, NR stands for nucleation assisted restricted volume solvent annealing (RVSA)] along with mixed organic cation based perovskite film for highly efficient (highest PCE: 16.78%), thermally stable perovskite solar cells (PSCs) with full temperature compatibility for flexible substrates. To the best of our knowledge, this is the highest efficiency ever reported with PSCs incorporating low temperature processed ZnO as electron transport layer (ETL). Unlike the conventional RVSA method [CR method, CR refers to conventional restricted volume solvent annealing (RVSA)], the reported NR method raises the degree of supersaturation of the precursor solution due to high solvent evaporation rate during the crucial primary nucleation phase, that ensures smooth and uniform perovskite grain distribution during the rapid crystal growth phase. NR method also provides better perovskite crystallinity during the annealing induced secondary crystallization phase, as unlike CR, NR perovskite does not contain high amount of residual solvent at this stage of perovskite grain growth. The photovoltaic performance, hysteretic behaviour and device degradation phenomena of NR PSCs have been compared with CR PSCs. Enhanced power conversion efficiency (PCE) attained with NR method has been explained with elaborate surface morphology and topography study, along with charge transport analysis with electrochemical impedance spectroscopy and Mott-Schottky analysis. Substantially mitigated photo-current hysteresis phenomenon with NR method has been elucidated in terms of inherent electrode polarization process. Adding to the merits, NR PSCs also demonstrate over three times higher device stability compared to CR PSCs, which has been investigated with frequency-dependent capacitive spectra and Mott-Schottky characterization of the aged devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. High-efficiency robust perovskite solar cells on ultrathin flexible substrates10.1038/ncomms10214 ↗
2. Highly efficient flexible perovskite solar cells using solution-derived NiOx hole contacts10.1021/acsnano.5b08135 ↗
3. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
4. High-performance flexible perovskite solar cells exploiting Zn2SnO4 prepared in solution below 100[thinsp][deg]C10.1038/ncomms8410 ↗
5. Low-temperature operation of perovskite solar cells: with efficiency improvement and hysteresis-less10.1016/j.nanoen.2016.08.016 ↗
6. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
7. Origin of the thermal instability in CH3NH3PbI3 thin films deposited on ZnO10.1021/acs.chemmater.5b01598 ↗
8. Improvement of stability of ZnO/CH3NH3PbI3 bilayer by aging step for preparing high-performance perovskite solar cells under ambient conditions10.1039/C6RA10072D ↗
9. Simultaneous enhancement in stability and efficiency of low-temperature processed perovskite solar cells10.1039/C6RA14186B ↗
10. Decomposition of organometal halide perovskite films on zinc oxide nanoparticles10.1021/acsami.5b04695 ↗
11. Reliable annealing of CH3NH3PbI3 films deposited on ZnO10.1021/acs.jpcc.6b00364 ↗
12. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/ange.201405334 ↗
13. Room-temperature crystallization of hybrid-perovskite thin films via solvent-solvent extraction for high-performance solar cells10.1039/C5TA00477B ↗
14. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
15. Investigation of the hydrolysis of perovskite organometallic halide CH3NH3PbI3 in humidity environment10.1038/srep21976 ↗
16. Catalysis by hydrogen halides in the gas phase. XIII. Isopropanol and hydrogen iodide10.1071/CH9671143 ↗
17. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
18. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
19. Thermal assisted oxygen annealing for high efficiency planar CH3NH3PbI3 perovskite solar cells10.1038/srep06752 ↗
20. Impact of annealing on spiroOMeTAD and corresponding solid-state dye sensitized solar cells10.1002/pssa.201431366 ↗
21. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
22. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
23. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
24. Single vs mixed organic cation for low temperature processed perovskite solar cells10.1016/j.electacta.2016.11.132 ↗
25. M.A. Mahmud, N.K. Elumalai, M.B. Upama, D. Wang, M. Wright, K.H. Chan, C. Xu, F. Haque, A. Uddin, Single vs mixed organic cation for low temperature processed perovskite solar cells, Electrochim. Acta.
26. Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells10.1016/j.solmat.2016.09.014 ↗
27. Capacitive dark currents, hysteresis, and electrode polarization in lead halide perovskite solar cells10.1021/acs.jpclett.5b00480 ↗
28. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
29. Enhanced stability of low temperature processed perovskite solar cells via augmented polaronic intensity of hole transporting layer10.1002/pssr.201600315 ↗
30. A promising alternative solvent of perovskite to induce rapid crystallization for high-efficiency photovoltaic devices10.1039/C4RA16253F ↗
31. Identification and characterization of the intermediate phase in hybrid organic-inorganic MAPbI3 perovskite10.1039/C5DT04420K ↗
32. A smooth CH3NH3PbI3 film via a new approach for forming the PbI2 nanostructure together with strategically high CH3NH3I concentration for high efficient planar-heterojunction solar cells10.1002/aenm.201570124 ↗
33. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
34. Microstrain effect on thermal properties of nanocrystalline Cu10.1016/S1359-6454(02)00155-6 ↗
35. Growth optimization of ZnS zns thin films by RF magnetron sputtering as prospective buffer layer in thin film solar cells
36. Influence of thickness and substrate temperature on electrical and photoelectrical properties of vacuum-deposited CdSe thin films10.1016/S0254-0584(02)00211-0 ↗
37. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting10.1002/anie.201309361 ↗
38. “Planar versus mesoscopic perovskite microstructures: the influence of CH3NH3PbI3 morphology on charge transport and recombination dynamics10.1016/j.nanoen.2016.02.031 ↗
39. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
40. High performance planar heterojunction perovskite solar cells with fullerene derivatives as the electron transport layer10.1021/am506869k ↗
41. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
42. Microstructures of organometal trihalide perovskites for solar cells: their evolution from solutions and characterization10.1021/acs.jpclett.5b01843 ↗
43. Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis10.1039/C6EE02016J ↗
44. Control of charge transport in the perovskite CH3NH3PbI3 thin film10.1002/cphc.201402815 ↗
45. Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber10.1063/1.4864778 ↗
46. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
47. Hole transport layer free inorganic CsPbIBr2 perovskite solar cell by dual source thermal evaporation10.1002/aenm.201502202 ↗
48. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
49. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell10.1002/aenm.201501310 ↗
50. Nucleation and growth control of HC(NH2)2PbI3 for planar perovskite solar cell10.1021/acs.jpcc.6b02443 ↗
51. Large formamidinium lead trihalide perovskite solar cells using chemical vapor deposition with high reproducibility and tunable chlorine concentrations10.1039/C5TA03577E ↗
52. Green · 1982
53. Improving the performance of perovskite solar cells with glycerol-doped PEDOT:PSS buffer layer10.1088/1674-1056/25/2/028402 ↗
54. Ionic reactivity at contacts and aging of methylammonium lead triiodide perovskite solar cells10.1002/aenm.201502246 ↗
55. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
56. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
57. Properties of contact and bulk impedances in hybrid lead halide perovskite solar cells including inductive loop elements10.1021/acs.jpcc.6b01728 ↗
58. Influences of dopant concentration in sol–gel derived azo layer on the performance of P3HT:PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
59. Slow dynamic processes in lead halide perovskite solar cells. Characteristic times and hysteresis10.1021/jz5011187 ↗
60. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
61. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
62. silver Iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗
63. Melt-infiltration of spiro-OMeTAD and thermal instability of solid-state dye-sensitized solar cells10.1039/c4cp00116h ↗