Finger and interconnect degradations in crystalline silicon photovoltaic modules: A review
Source abstract
Abstract
Abstract The research and developments in the field of defects and degradations (D & D) in crystalline silicon photovoltaic (PV) modules have been on the forefront, to ensure reliable long term operation of solar power plants worldwide. Thereby, to maintain the overall electrical integrity and performance of cells and modules, it is essential to improve the reliability of cell metallization (i.e., busbar and fingers) and interconnects against D & D in the outdoor field conditions. This paper presents a comprehensive review and analysis on the reported D & D in conventional screen printed metallization and soldered interconnects. The review has been presented on the basis of operating modes of degradation induced via thermo-mechanical fatigue, chemical mechanisms, manufacturing fallacies, and system voltage. Furthermore, for increased understanding of the underlying defect mechanisms, these D & D have been investigated for the respective modes of electrical loss, and sensitivity to common variable parameters like position, orientation and number of defects by electrical stimulation. The use of common characterization techniques for defect detection and analysis have also been presented, wherein, the effective use of imaging techniques is advised. Also, standard environmental tests, specified under IEC 61215 were found to induce finger and interconnect D & D like in field, however, defect specific tests may be devised for a detailed analysis. Finally, the precautions performed during the manufacturing processes, especially the soldering process are identified to be key in prevention of D & D in finger and interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies · Electrostatic Discharge in Electronics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Fraunhofer · 2019
2. 2017
3. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
4. In-field characterization of key performance parameters for bifacial photovoltaic installation in a desert climate10.1016/j.renene.2020.05.174 ↗
5. Libal · 2018
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
8. A novel study for determining early life degradation of multi-crystalline-silicon photovoltaic modules observed in western Himalayan Indian climatic conditions10.1016/j.solener.2016.04.023 ↗
9. Simulation of water ingress into PV-modules: IEC-testing versus outdoor exposure10.1016/j.solener.2015.03.007 ↗
10. Performance assessment and degradation analysis of solar photovoltaic technologies: a review10.1016/j.rser.2017.04.083 ↗
11. Degradation of mono-crystalline photovoltaic modules after 22 years of outdoor exposure in the composite climate of India10.1016/j.solener.2016.06.047 ↗
12. Quintana · 2003 · 1436
13. Shashwata · 2017 · 217
14. Effect of glass Na content on adhesional strength of PV modules
15. Reliability and degradation of solar PV modules—case study of 19-year-old polycrystalline modules in Ghana10.3390/technologies5020022 ↗
16. Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in Southern Europe10.1002/pip.1083 ↗
17. Failure modes effects and criticality analysis (FMECA) approach to the crystalline silicon photovoltaic module reliability assessment
18. Failure and degradation modes and rates of PV modules in a hot-dry climate: results after 16 years of field exposure
19. Failure mode analysis of PV modules in different climatic conditions10.1109/JPHOTOV.2020.3043847 ↗
20. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
21. Modelling and experimental investigations of microcracks in crystalline silicon photovoltaics: a review10.1016/j.renene.2019.07.138 ↗
22. Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: a literature review10.1016/j.solmat.2018.12.027 ↗
23. Assessment of different correlations to estimate distinct technology PV module operating temperature for Indian site
24. Degradation evaluation of crystalline-silicon photovoltaic modules after a few operation years in a tropical environment10.1016/j.solener.2014.02.006 ↗
25. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
26. Experimental investigation of observed defects in crystalline silicon PV modules under outdoor hot dry climatic conditions in Algeria10.1016/j.solener.2017.11.018 ↗
27. Potential induced degradation (PID) study on accelerated stress tested PV modules
28. Effect of temperature and humidity on the degradation rate of multicrystalline silicon photovoltaic module10.1155/2013/925280 ↗
29. Photovoltaic module reliability improvement through application testing and failure analysis10.1109/TR.1982.5221325 ↗
30. Accelerated testing and failure of thin-film PV modules10.1002/pip.526 ↗
31. Modelling of conditions for accelerated lifetime testing of Humidity impact on PV-modules based on monitoring of climatic data10.1016/j.solmat.2011.12.011 ↗
32. Long term reliability of photovoltaic modules
33. Investigation of delamination in an edge-defined film-fed growth photovoltaic module10.1016/j.solmat.2004.12.004 ↗
34. Comparative investigation and analysis of delaminated and discolored encapsulant degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2020.04.041 ↗
35. A study of shading and resistive loss from the fingers of encapsulated solar cells10.1016/S0927-0248(99)00024-0 ↗
36. A methodology to account for the finger interruptions in solar cell performance10.1016/j.microrel.2012.07.014 ↗
37. Non-destructive approach for severity investigation of shunts in crystalline silicon photovoltaic modules by combination of electroluminescence imaging and lock-in thermography10.1088/1361-6501/ab0265 ↗
38. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells10.1016/j.solmat.2019.110040 ↗
39. Imaging and micro-structural characterization of moisture induced degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2019.11.037 ↗
40. Numerical analysis on thermal crack initiation due to non-homogeneous solder coating on the round strip interconnection of photo-voltaic modules10.1016/j.solener.2019.10.092 ↗
41. 2005
42. 2016
43. Failure modes identified during adhesion testing of metal fingers on silicon solar cells10.1016/j.egypro.2015.02.087 ↗
44. Experimental investigation of observed defects in crystalline silicon PV modules under outdoor hot dry climatic conditions in Algeria10.1016/j.solener.2017.11.018 ↗
45. Broken metal fingers in silicon wafer solar cells and PV modules10.1016/j.solmat.2012.09.013 ↗
46. Detection of finger interruptions in silicon solar cells using photoluminescence imaging10.1109/JPHOTOV.2017.2732220 ↗
47. Characterization of degradation under standard environmental testing methods for crystalline silicon photovoltaic modules10.22606/ijper.2017.13002 ↗
48. Investigation of degradation in photovoltaic modules by infrared and electroluminescence imaging10.1007/978-981-10-3908-9_1 ↗
49. Corrosion of the glass and formation of lead compounds in the metallization by high temperature and high humidity test of crystalline silicon PV module
50. Corrosion behavior of crystalline silicon solar cells10.1016/j.microrel.2017.01.006 ↗
51. Silver nanoparticles cause snail trails in photovoltaic modules10.1016/j.solmat.2013.11.013 ↗
52. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
53. Faults and infrared thermographic diagnosis in operating c-Si photovoltaic modules: a review of research and future challenges10.1016/j.rser.2016.04.079 ↗
54. Effect of operating temperature on degradation of solder joints in crystalline silicon photovoltaic modules for improved reliability in hot climates10.1016/j.solener.2018.06.007 ↗
55. Effect of coefficient of thermal expansion (CTE) mismatch of solder joint materials in photovoltaic (PV) modules operating in elevated temperature climate on the joint's damage10.1016/j.promfg.2017.07.236 ↗
56. Dubey · 2013
57. Thermal modelling and experimental validation of hot spot in crystalline silicon photovoltaic modules for real outdoor condition10.1016/j.solener.2016.10.016 ↗
58. Lorenz · 2016 · 413
59. A methodology to account for the finger non-uniformity in photovoltaic solar cell10.1016/j.egypro.2012.07.050 ↗
60. Honsberg
61. The influence of laminate design on cell degradation10.1016/j.egypro.2013.07.311 ↗
62. Advanced front side metallization for crystalline silicon solar cells based on a nickel-silicon contact
63. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
64. Screen‐printed front junction n‐type silicon solar cells
65. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
66. Screen-printing simulation study on solar cell front side AG paste
67. Thermo-mechanical degradation at finger-solder interface in a crystalline silicon photovoltaic module under thermal fatigue conditions
68. Influence of cell packaging and design parameters on thermo-mechanical reliability of fingers in crystalline silicon photovoltaic modules
69. Automatic finger interruption detection in electroluminescence images of multicrystalline solar cells10.1155/2015/879675 ↗
70. Efficient detection of finger interruptions from photoluminescence images
71. Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules10.1038/srep04506 ↗
72. A generalized electric model for mono and polycrystalline silicon in the presence of cracks and random defects10.1016/j.egypro.2014.08.005 ↗
73. Material-induced shunts in multicrystalline silicon solar cells10.1134/S106378260704015X ↗
74. Shunt types in crystalline silicon solar cells10.1002/pip.544 ↗
75. Influence of local shunting on the electrical performance in industrial Silicon solar cells10.1016/j.solener.2016.10.020 ↗
76. Quantitative estimation of shunt resistance in crystalline silicon photovoltaic modules by electroluminescence imaging10.1109/JPHOTOV.2019.2930402 ↗
77. Understanding junction breakdown in multicrystalline solar cells10.1063/1.3562200 ↗
78. The effect of reduced shunt resistance and shading on photovoltaic module performance
79. Effect of shunt resistance on the performance of mc-Silicon solar cells: a combined electro-optical and thermal investigation
80. Method to counter warpage due to stringing for back contact solar cells
81. Advanced yield strength of interconnector ribbon for photovoltaic module using crystallographic texture control10.1007/s12540-014-2005-x ↗
82. The impact of yield strength of the interconnector on the internal stress of the solar cell within a module
83. The influence of PV module materials and design on solder joint thermal fatigue durability10.1109/JPHOTOV.2016.2598255 ↗
84. Decoupled effects of thermal cycle parameters on thermo-mechanical damage accumulation at fingers in crystalline silicon photovoltaic modules10.1016/j.mee.2019.111102 ↗
85. Investigation and analysis of finger breakages in commercial crystalline silicon photovoltaic modules under standard thermal cycling test10.1016/j.engfailanal.2019.03.031 ↗
86. Thermal cycling induced load on copper-ribbons in crystalline photovoltaic modules
87. Cracks in solar cell metallization leading to module power loss under mechanical loads10.1016/j.egypro.2014.08.011 ↗
88. Updated life prediction models for solder joints with removal of modeling assumptions and effect of constitutive equations
89. Constitutive relations for tin-bases solder joints10.1109/33.206925 ↗
90. Constitutive models of creep for lead-free solders10.1007/s10853-009-3521-9 ↗
91. Effect of primary creep behavior on fatigue damage accumulation rates in accelerated thermal cycling of Sn3.0Ag0.5Cu Pb-free interconnects
92. Durability of Pb-free solder between copper interconnect and silicon in photovoltaic cells10.1002/pip.944 ↗
93. Effect of interconnect geometry on the evolution of stresses in a solar photovoltaic laminate during and after lamination10.1016/j.solmat.2018.07.026 ↗
94. Simulation and experiment of thermal fatigue in the CPV die attach10.1063/1.4753883 ↗
95. Causes of degradation identified by the extended thermal cycling test on commercially available crystalline silicon photovoltaic modules10.1109/JPHOTOV.2017.2741102 ↗
96. Optimization of thermo-mechanical reliability of solder joints in crystalline silicon solar cell assembly10.1016/j.microrel.2015.12.031 ↗
97. Thermo-mechanical deformation degradation of crystalline silicon photovoltaic (c-Si PV) module in operation10.1016/j.engfailanal.2017.11.009 ↗
98. Thermomechanical stresses of silicon photovoltaic modules
99. Relation of silver electrode solderability to intermetallic compound growth rate10.1007/s10854-019-00972-3 ↗
100. Characterizations of Cu/Sn-Zn solder/Ag interfaces on photovoltaic ribbon for silicon solar cells10.1109/JPHOTOV.2014.2373822 ↗