journal article·2021-01Open access

Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces

Jimmy M. Newkirk, Illya Nayshevsky, Archana Sinha, Adam M. Law, QianFeng Xu, Bobby To, Paul F. Ndione, Laura T. Schelhas, John M. Walls, Alan M. Lyons, David C. Miller

Abstract

Abstract Natural soiling and the subsequent requisite cleaning of photovoltaic (PV) modules result in abrasion damage to the cover glass. The durability of the front glass has important economic consequences, including determining the use of anti-reflective and/or anti-soiling coatings as well as the method and frequency of operational maintenance (cleaning). Artificial linear brush abrasion using Nylon 6/12 bristles was therefore examined to explore the durability of representative PV first-surfaces, i.e., the surface of a module incident to direct solar radiation. Specimens examined include silane surface functionalized-, roughened (etched)-, porous silica-coated-, fluoropolymer-coated-, and ceramic (TiO2 or ZrO2/SiO2/ZrO2/SiO2)-coated-glass, which are compared to monolithic-poly(methyl methacrylate) and -glass coupons. Characterization methods used in this study include: optical microscopy, ultraviolet–visible–near-infrared (UV-VIS-NIR) spectroscopy, sessile drop goniometry, white-light interferometry, atomic force microscopy (AFM), and depth-profiling X-ray photoelectron spectroscopy (XPS). The corresponding characteristics examined include: surface morphology, transmittance (i.e., optical performance), surface energy (water contact angle), surface roughness, scratch width and depth, and chemical composition, respectively. The study here was performed to determine coating failure modes; identify characterization methods that can detect nascent failures; compare the durability of popular contemporary coating materials; identify their corresponding damage characteristics; and compare slurry and dry-dust abrasion. This study will also aid in developing an abrasion standard for the PV industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Optical Coatings and Gratings · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
2. Effects of outdoor exposure on the solar reflectance properties of silvered glass mirrors
3. Cleaning of soiled facades
4. Durability of Fresnel lenses: a review specific to the concentrating photovoltaic application10.1016/j.solmat.2011.01.031 ↗
5. Evaluation of soiling and potential mitigation approaches on photovoltaic glass10.1109/JPHOTOV.2018.2878286 ↗
6. Anti-reflective coatings: a critical, in-depth review10.1039/c1ee01297e ↗
7. Wohlgemuth · 2020
8. Miller · 2016 · 1
9. BS EN 1096-2 · 2012 · 1
10. ASTM D2486 · 2012 · 1
11. DIN 53778-2 · 1983 · 1
12. ISO 11998 · 2006 · 1
13. ASTM D4213 · 2016 · 1
14. ASTM D3450 · 2015 · 1
15. ASTM D4828 · 2016 · 1
16. 2015 · 1
17. ISO 15082 · 2016 · 1
18. ISO 20566 · 2013 · 1
19. ISO 3537 · 2015 · 1
20. ASTM D1044 · 2013 · 1
21. ASTM G195 · 2013 · 1
22. ASTM D4060 · 2014 · 1
23. Susceptibility of CPV optical materials to abrasion10.1063/1.5124201 ↗
24. Guidelines for the development of abrasion-resistant AR coatings: input from modelling and experimental work
25. Reflectance measurements for testing the effect of module cleaning on the glass surface
26. Investigation on the impact of module cleaning on the antireflection coating
27. Influence of the cleaning on the surface of PV modules
28. AECTP 300 · 2006 · 1
29. “Soiling and abrasion of glazing material and mirrors in extreme climatic conditions – indoor and outdoor tests
30. Combined soiling and abrasion testing of anti-soiling coatings
31. The abrasion of photovoltaic glass: a comparison of the effects of natural and artificial aging
32. Performance of different anti-reflective coated glass for PV modules
33. A highly abrasive-resistant, long-lasting anti-reflective coating for PV module glass
34. “From the impact of harsh climates and environmental conditions on PV modules—development of a soiling and abrasion test
35. Performance and durability of broadband antireflection coatings for thin film CdTe solar cells10.1116/1.4973909 ↗
36. Test methods for hydrophobic coatings on solar cover glass
37. The performance and durability of single-layer sol-gel anti-reflection coatings applied to solar module cover glass10.1016/j.surfcoat.2018.11.030 ↗
38. Pantano · 1979
39. An overview of robotic cleaning systems
40. I. Nayshevsky, Q.F. Xu, A.M. Lyons, “Literature survey of dust particle dimensions on soiled solar panel modules”, Mendeley Data, https://doi.org/10.17632/gt2h83ssb5.
41. ISO 12103-1 · 2016 · 1
42. Study of soiling loss on photovoltaic modules with artificially deposited dust of different gravimetric densities and compositions collected from different locations in India
43. Quantification of spectral losses of natural soiling and detailed microstructural analysis of dust collected from different locations in Dubai, UAE
44. Characterizing mineral dusts and other aerosols from the Middle East—Part 1: ambient sampling10.1080/08958370802464273 ↗
45. Characterizing mineral dusts and other aerosols from the Middle East—Part 2
46. Characterization of dust accumulated on photovoltaic panels in Doha, Qatar10.1016/j.solener.2016.11.053 ↗
47. Fluoropolymer coatings for solar cover glass: anti-soiling mechanisms in the presence of dew10.1016/j.solmat.2019.110281 ↗
48. Examination of an optical transmittance test for photovoltaic encapsulation materials
49. Measurement procedures for materials used in photovoltaic modules – Part 1–4: encapsulants—Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
50. Broadband anti-reflection coatings for thin film photovoltaics
51. Influence of glass basicity on redox interactions of iron-manganese-copper ion pairs in soda-lime-silica glass10.1134/S1087659608010033 ↗
52. Newkirk · 2020 · 1
53. Optical constants of the noble metals10.1103/PhysRevB.6.4370 ↗
54. Optical properties of soda lime glasses10.1016/0165-1633(85)90052-8 ↗
55. An investigation of the changes in poly(methyl methacrylate) specimens after exposure to ultra-violet, heat, and humidity10.1016/j.solmat.2012.05.043 ↗
56. Walls · 2018 · vol. 5
57. An infra-red reflecting optical coating for solar cover glass
58. Precise XPS depth profile of soda-lime-silica glass using C60 ion beam10.1016/j.jnoncrysol.2009.09.027 ↗
59. Laboratory studies of particle cementation and PV module soiling
60. Iron oxide coating films in soda-lime glass by triboadhesion10.1007/s12206-008-0619-y ↗
61. ISO 19403-7 · 2017 · 1
62. Testing the durability of anti-soiling coatings for solar cover glass by outdoor exposure in Denmark
63. An experiment to measure Mie and Rayleigh total scattering cross sections10.1119/1.1466815 ↗