The effect of soiling on the reflectance of solar reflector materials - Model for prediction of incidence angle dependent reflectance and attenuation due to dust deposition
Source abstract
Abstract
Abstract The accumulation of dust and soil on the surface of solar reflectors is an important factor reducing the effective use of solar energy, especially for concentrating solar power plants. In this study, we investigated glass-based mirrors exposed in the desert and mirrors soiled in the laboratory. We achieved artificial, controlled soiling with different soil types by use of an in-house dusting device and measured scattering, hemispherical and specular reflectance. Results showed that small-angle scattering due to dust is noticeable and severely reduces reflectance of mirrors with otherwise high specularity. Prominent result is a significant decrease of reflectance for increasing local solar incidence angles, for example from 0.91 at 8° incidence angle to 0.84 at 70° incidence angle. Therefore, we present a model to predict specular reflectance for different levels of cleanliness. The model applies the Lambert-Beer law and relates the incidence angle dependent attenuation of solar radiation to the dust layer. An application of our model to optical yield prediction indicated a significant relative decrease in predicted annual optical efficiency of up to 1.5% for parabolic trough power plants. In future research, a similar method could be adapted to predict optical losses of photovoltaic modules with flat cover glass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
2. Dust effect on flat surfaces – a review paper10.1016/j.rser.2014.02.016 ↗
3. Study of different cleaning methods for solar reflectors used in CSP plants10.1016/j.egypro.2014.03.009 ↗
4. On characterization and measurement of average solar field mirror reflectance in utility-scale concentrating solar power plants10.1016/j.solener.2013.11.009 ↗
5. Measurements of mirror soiling at a candidate CSP site10.1016/j.egypro.2014.03.146 ↗
6. Heimsath · 2010
7. Stark · 2014
8. A. Fernandez-Garcia, F. Sutter, M. Montecchi, F. Sallaberry, A. Heimsath, C.Heras, E. Le Baron, A. Soum-Glaude, Parameters and Method to Evaluate the Solar Reflectance Properties of Reflector Materials for Concentrating Solar Power Technology , Solar Paces Reflectance Guideline Version 3 (2018), SolarPaces, 20180320.
9. Angle resolved specular reflectance measured with VLABS10.1016/j.egypro.2015.03.173 ↗
10. Heliostat field optimization: a new computationally efficient model and biomimetic layout10.1016/j.solener.2011.12.007 ↗
11. Hemispherical reflectance results of the SolarPACES reflectance round robin10.1016/j.egypro.2015.03.174 ↗
12. Simplified analysis of solar-weighted specular reflectance for mirrors with high specularity
13. Specular reflectance of soiled glass mirrors – study on the impact of incidence angles
14. A new correlation for direct beam solar radiation received by photovoltaic panel with sand dust accumulated on its surface10.1016/S0038-092X(98)00060-7 ↗
15. Microscopic measurement and analysis of the soiling behavior of surfaces with standardized and real dust – a parameter study10.1016/j.egypro.2016.06.239 ↗
16. Bennett · 1999
17. Nicodemus · 1977
18. Solar multiple optimization for a solar-only thermal power plant, using oil as heat transfer fluid in the parabolic trough collectors10.1016/j.solener.2009.08.010 ↗
19. Branke · 2010
20. Remund · 2015