journal article·2018-05

The fabrication of Cd-free Cu2ZnSnS4-Ag2ZnSnS4 heterojunction photovoltaic devices

Huafei Guo, Changhao Ma, Kezhi Zhang, Xuguang Jia, Yan Li, Ningyi Yuan, Jianning Ding

Publisher page

Abstract

Abstract Cu2ZnSnS4 (CZTS) is a low cost, non-toxic material composed of earth-abundant elements with a large optical absorption coefficient. However, in CZTS solar cells, CdS buffer layers are widely used, which contain toxic elements and lead to lattice mismatch with CZTS thin films. In this paper, we have systematically investigated a I-II-IV-VI semiconductor material to replace the CdS buffer layer with a non-toxic material that offers good lattice matching with the CZTS film. For the first time, Cd-free Cu2ZnSnS4-Ag2ZnSnS4 heterojunction photovoltaic device is fabricated, where Cu2ZnSnS4 and Ag2ZnSnS4 layers are obtained by co-sputtering method. The cell exhibits a 4.51% efficiency which is higher than those of CZTS solar cells with ZnS and In2S3 buffer layers. This work offers the possibility to realize environmentally benign, scalable, low-cost, and high-efficiency solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
3. Tin disulfide segregationon CZTS films sulfurized at high pressure10.1016/j.matlet.2015.11.090 ↗
4. Enthalpy of formation for Cu−Zn−Sn−S (CZTS) calculated from surface binding energies experimentally measured by ion sputtering10.1021/cm504749d ↗
5. Influence of copper concentration on sprayed CZTS thin films deposited at hightemperature10.1016/j.ceramint.2015.02.124 ↗
6. Fabrication and Electronic Properties of CZTSe Single10.1109/JPHOTOV.2014.2363552 ↗
7. Facile synthesis of single crystalline sub-micron Cu2ZnSnS4 (CZTS) powders using solvothermal treatment10.1039/C4RA12815J ↗
8. In-situ and green method to prepare Pt-free Cu2ZnSnS4 (CZTS) counter electrodes for efficient and low cost dye-sensitized solar cells10.1021/acssuschemeng.5b00585 ↗
9. The stability domain of the selenide kesterite photovoltaic materials and NMR investigation of the Cu/Zn disorder in Cu2ZnSnSe4 (CZTSe)10.1039/C5CP01709B ↗
10. Composition control and formation pathway of CZTS and CZTGS nanocrystal inks for kesterite solar cells10.1021/acs.chemmater.5b00104 ↗
11. Sputtering processed highly efficient Cu2ZnSn(S,Se)4 solar cells by a low-cost,simple, environmentally friendly, and up-scalable strategy10.1039/C5GC02417J ↗
12. 7.1% efficient co-electroplated Cu2ZnSnS4 thin film solar cells with sputtered CdS buffer layers10.1039/C5GC02057C ↗
13. A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency10.1039/C5CC01170A ↗
14. Effect of deposited temperatures of the buffer layer on the band offset of CZTS/In2S3 heterostructure and its solar cell performance10.1088/1674-1056/26/4/046802 ↗
15. Reduced interface recombination in Cu2ZnSnS4 solar cells with atomic layer deposition Zn1−xSnxOy buffer layers10.1063/1.4937998 ↗
16. Prospects of Zn(O,S) as an alternative buffer layer for Cu2ZnSnS4 thin-film solar cells from numerical simulation10.1049/mnl.2016.0130 ↗
17. Combinatorial reactive sputtering of In2S3 as an alternative contact layer for thin film solar cells10.1021/acsami.6b02213 ↗
18. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
19. First-principles study of Ag2ZnSnS4 as a photocatalyst10.7498/aps.63.247101 ↗
20. Synthesis of multicomponent sulfide Ag2ZnSnS4 as an efficient photocatalyst for H2 production under visible light irradiation10.1039/C2RA21481D ↗
21. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
22. The preparation of Ag2ZnSnS4 homojunction solar cells10.1016/j.matlet.2017.07.089 ↗
23. First-principles study of Ag2ZnSnS4 as a photocatalyst10.7498/aps.63.247101 ↗
24. Crystal and electronic band structure of Cu2ZnSnX4 ( X = S and Se) photovoltaic absorbers: first-principles insights
25. Lattice-matched Cu2ZnSnS4/CeO2 solar cell with open circuit voltage boost10.1063/1.4971779 ↗
26. Preparation of Cu2ZnSnS4 (CZTS) sputtering target and its application to the fabrication of CZTS thin-film solar cells10.1016/j.jallcom.2015.09.111 ↗
27. Nano composite synthesis and characterization of Kesterite,Cu2ZnSnS4 (CZTS) for photovoltaic applications10.1016/j.ceramint.2013.03.057 ↗
28. Influence of substrate temperature on the properties of electrodeposited kesterite Cu2ZnSnS4 (CZTS) thin films for photovoltaic applications10.1007/s10854-014-2387-z ↗
29. Effect of ultrasonically generated water vapor treatment on the Cu2ZnSnS4/CdS heterojunction-based photovoltaic cells10.1016/j.solmat.2016.07.014 ↗
30. Improved photoelectrochemical performance of Cu2ZnSnS4 (CZTS) thin films prepared using modified successive ionic layer adsorption and reaction (SILAR) sequence10.1016/j.electacta.2014.10.124 ↗
31. A strategy to stabilize kesterite CZTS for high-performance solar cells10.1021/acs.chemmater.5b00172 ↗
32. Yang · Prog. Photovolt. · 2015 · 23 · 86210.1002/pip.2500 ↗
33. A low-temperature formation path toward highly efficient Se-free Cu2ZnSnS4 solar cells fabricated through sputtering and sulfurization10.1039/C5CE02279G ↗