journal article·2017-08

Controlled Ostwald ripening mediated grain growth for smooth perovskite morphology and enhanced device performance

Md Arafat Mahmud, Naveen Kumar Elumalai, Mushfika Baishakhi Upama, Dian Wang, Binesh Puthen-Veettil, Faiazul Haque, Matthew Wright, Cheng Xu, Almantas Pivrikas, Ashraf Uddin

Publisher page

Abstract

Abstract Here we report, a novel two-step dipping technique via post-immersion polar solvent engineering for controlled secondary grain growth (Ostwald Ripening) to fabricate efficient mixed organic cation based MA0.6FA0.4PbI3 perovskite solar cell (PSC) in conjunction with low temperature (140 °C) processed sol-gel ZnO ETL for full process compatibility with flexible substrates. The reported MTD-SE method (stands for Modified Two Step Dipping - Solvent Engineering) limits the grain coarsening effect during post-immersion stage of two-step dipping method and provides substantially smooth perovskite surface morphology for enhanced charge transport properties compared to conventional two-step techniques by means of controlled Ostwald Ripening process. The grain coarsening process and concomitant irregular grain size distribution are judiciously controlled by increasing the chemical potential or free energy change (ΔG) of the system at the post-immersion. The photovoltaic performance and photo-current hysteresis phenomena of the reported MTD-SE PSC have been compared with PSCs fabricated with conventional two-step techniques, incorporating 2-Propanol or ethyl alcohol as dipping solvents. The enhanced device performance of MTD-SE PSCs is correlated with the conducive role of the evenly distributed grain boundaries in them, which act as carrier dissociation interfaces and carrier transport pathways to charge selective contacts for superior charge separation and extraction properties. Adding to the merits, MTD-SE PSCs also demonstrate significantly suppressed photo-current hysteretic behaviour which has been elucidated in the context of faster ion migration kinetics with the increased grain boundaries, which exhibit higher ionic diffusivity. The favourable ion migration kinetics with MTD-SE PSC have also been comprehensively analysed from the frequency-dependent capacitive spectra.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
2. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
3. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
4. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
5. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
6. Perovskite-based solar cells: impact of morphology and device architecture on device performance10.1039/C4TA05226A ↗
7. Efficient perovskite hybrid solar cells through a homogeneous high-quality organolead iodide layer
8. A smooth CH3NH3PbI3 film via a new approach for forming the PbI2 nanostructure together with strategically high CH3NH3I concentration for high efficient planar-heterojunction solar cells10.1002/aenm.201570124 ↗
9. Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells10.1016/j.solmat.2016.09.014 ↗
10. Simultaneous enhancement in stability and efficiency of low-temperature processed perovskite solar cells10.1039/C6RA14186B ↗
11. High performance planar heterojunction perovskite solar cells with fullerene derivatives as the electron transport layer10.1021/am506869k ↗
12. Control of charge transport in the perovskite CH3NH3PbI3 thin film10.1002/cphc.201402815 ↗
13. Enhanced performance in hole transport material free perovskite solar cells via morphology control of PbI2 film by solvent treatment10.1016/j.jpowsour.2016.04.062 ↗
14. A closer look into two-step perovskite conversion with X-ray scattering10.1021/acs.jpclett.5b00329 ↗
15. Grain growth in thin films10.1146/annurev.ms.20.080190.001333 ↗
16. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting10.1002/anie.201309361 ↗
17. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
18. High-performance flexible perovskite solar cells exploiting Zn2SnO4 prepared in solution below 100°C10.1038/ncomms8410 ↗
19. Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
20. Enhanced stability of low temperature processed perovskite solar cells via augmented polaronic intensity of hole transporting layer10.1002/pssr.201600315 ↗
21. M.A. Mahmud, N.K. Elumalai, M.B. Upama, D. Wang, M. Wright, K.H. Chan, C. Xu, F. Haque, A. Uddin, Single vs mixed organic cation for low temperature processed perovskite solar cells, Electrochimica Acta.
22. A promising alternative solvent of perovskite to induce rapid crystallization for high-efficiency photovoltaic devices10.1039/C4RA16253F ↗
23. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
24. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
25. Solvent and intermediate phase as boosters for the perovskite transformation and solar cell performance10.1038/srep25648 ↗
26. Benefit of grain boundaries in organic–inorganic halide planar perovskite solar cells10.1021/acs.jpclett.5b00182 ↗
27. Microscopic investigation of grain boundaries in organolead halide perovskite solar cells10.1021/acsami.5b09801 ↗
28. Critical role of grain boundaries for ion migration in formamidinium and methylammonium lead halide perovskite solar cells10.1002/aenm.201600330 ↗
29. Planar versus mesoscopic perovskite microstructures: the influence of CH3NH3PbI3 morphology on charge transport and recombination dynamics10.1016/j.nanoen.2016.02.031 ↗
30. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
31. Formation mechanism of freestanding CH3NH3PbI3 functional crystals: In situ transformation vs dissolution–crystallization10.1021/cm5028817 ↗
32. Ostwald ripening of two-phase mixtures10.1146/annurev.ms.22.080192.001213 ↗
33. Microstructures of organometal trihalide perovskites for solar cells: their evolution from solutions and characterization10.1021/acs.jpclett.5b01843 ↗
34. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
35. Nucleation and growth control of HC(NH2)2PbI3 for planar perovskite solar cell10.1021/acs.jpcc.6b02443 ↗
36. Hole transport layer free inorganic CsPbIBr2 perovskite solar cell by dual source thermal evaporation10.1002/aenm.201502202 ↗
37. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
38. Green · 1982
39. Improving the performance of perovskite solar cells with glycerol-doped PEDOT: pss buffer layer10.1088/1674-1056/25/2/028402 ↗
40. Ionic reactivity at contacts and aging of methylammonium lead triiodide perovskite solar cells10.1002/aenm.201502246 ↗
41. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗
42. Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates10.1038/ncomms3761 ↗
43. Surface engineering of ZnO thin film for high efficiency planar perovskite solar cells10.1038/srep13211 ↗
44. Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor10.1039/C4NR03181D ↗
45. Enhanced ambient stability of efficient perovskite solar cells by employing a modified fullerene cathode interlayer10.1002/advs.201600027 ↗
46. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
47. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
48. Capacitive dark currents, hysteresis, and electrode polarization in lead halide perovskite solar cells10.1021/acs.jpclett.5b00480 ↗
49. Properties of contact and bulk impedances in hybrid lead halide perovskite solar cells including inductive loop elements10.1021/acs.jpcc.6b01728 ↗
50. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
51. Role of ZnO Electron-selective layers in regular and inverted bulk heterojunction solar cells10.1021/jz200045x ↗
52. How polycrystalline devices can outperform Single-crystal ones: thin film CdTe/CdS solar cells10.1002/adma.200306624 ↗
53. Understanding the beneficial role of grain boundaries in polycrystalline solar cells from single-grain-boundary scanning probe microscopy10.1002/adfm.200500396 ↗
54. Slow dynamic processes in lead halide perovskite solar cells. Characteristic times and hysteresis10.1021/jz5011187 ↗
55. Low-temperature operation of perovskite solar cells: with efficiency improvement and hysteresis-less10.1016/j.nanoen.2016.08.016 ↗
56. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
57. Vacancy migration at the {410}/[001] symmetric tilt grain boundary of MgO: an atomistic simulation study10.1103/PhysRevB.56.11477 ↗
58. Experiment and theory of diffusion in alumina10.1111/j.1151-2916.2003.tb03340.x ↗