journal article·2017-03

Stability and reliability of P3HT:PC61BM inverted organic solar cells

Nikhil Chander, Sujata Singh, S. Sundar Kumar Iyer

Publisher page

Abstract

Abstract Improving the stability and reliability of organic photovoltaic (OPV) devices is an area of intense research as it is the major barrier in the commercialization of these devices. We study the stability of inverted structured OPV devices in the present work. A large number of these were fabricated and their shelf life times were recorded. P3HT devices show an average T80 (time in which cell efficiency falls to 80% of its initial value) of 34 days. Some of the devices were tested in actual working conditions outdoors in sunlight. A very low T80 value of 12 h was observed during the outdoor testing. Thermal degradation study was performed on the devices at 65 °C in dark and an average T80 of 200 h was obtained. Signatures of trap formation were observed by analysing and comparing the dark current-voltage characteristics of the pristine and degraded devices. The solar cells degrade due to trap formation in the active layer and formation of charge extraction barriers at the contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. Development of inverted organic solar cells with TiO2
3. Efficient, Air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
4. Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells10.1002/adma.201201958 ↗
5. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
6. Oxygen doping-induced photogeneration loss in P3HT: pcbm solar cells10.1016/j.solmat.2012.01.012 ↗
7. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
8. The mechanism of photo-and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
9. Pathways for the degradation of organic photovoltaic P3HT: pcbm based devices10.1016/j.solmat.2008.01.020 ↗
10. Modeling the temperature induced degradation kinetics of the short circuit current inorganic bulk heterojunction solar cells10.1063/1.3391669 ↗
11. Real time investigation of the interface between a P3HT: pcbm layer and an Al electrode during thermal annealing10.1002/marc.200900224 ↗
12. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
13. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
14. Degradation mechanisms in organic solar cells: localized moisture encroachment and cathode reaction10.1016/j.solmat.2012.04.038 ↗
15. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
16. Long term stability of efficient inverted P3HT: pcbm solar cells10.1016/j.solmat.2008.12.022 ↗
17. Lifetime of organic photovoltaics: status and predictions10.1002/aenm.201501208 ↗
18. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
19. Y.Tamai, H.Ohkita, M.Namatame, K.Marumoto, S.Shimomura, T.Yamanari, S.Ito, Light-Induced Degradation Mechanism in Poly(3-hexylthiophene)/Fullerene Blend Solar Cells, Adv. Energy Mater., 1600171. doi:10. 1002/aenm. 20160017110.1002/aenm.201600171 ↗
20. Traps signature in steady state current-voltage characteristics of organic diode10.1063/1.4884838 ↗
21. A.P. Tyagi (ed.), Solar Radiant Energy Over India, Indian Meteorological Department, Ministry of Earth Sciences, Govt. of India, 2009
22. Improved stability and enhanced efficiency of dye sensitized solar cells by using europium doped yttrium vanadate down-shifting nanophosphor10.1039/C5RA10067D ↗
23. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
24. Influence of hole extraction efficiency on the performance and stability of organic solar cells10.1016/j.solmat.2013.04.019 ↗
25. Electron barrier formation at the organic-back contact interface is the first step in thermal degradation of polymer solar cells10.1002/adfm.201304166 ↗
26. Phase diagram of p3ht/pcbm blends and its implication for the stability of morphology10.1021/jp804151a ↗
27. Predicting thermal stability of organic solar cells through an easy and fast capacitance measurement10.1016/j.solmat.2015.05.041 ↗
28. Shelf life degradation of bulk heterojunction solar cells: intrinsic evolution of charge transfer complex10.1002/aenm.201401997 ↗
29. Structural factors that affect the performance of organic bulk heterojunction solar cells10.1021/ma400924b ↗
30. Polymer defect states modulate open-circuit voltage in bulk-heterojunction solar cells10.1063/1.4841475 ↗
31. Unintentional bulk doping of polymer-fullerene blends from a thin interfacial layer of MoO310.1002/aenm.201600670 ↗