Two-dimensional modeling of TiO2 nanowire based organic–inorganic hybrid perovskite solar cells
Source abstract
Abstract
Abstract Organo-metal halide perovskite solar cells have shown unique charms in the upgrade rate of maximum power conversion efficiency, the diversity of device architecture and facilitated fabrication process. And the clear understanding of the role of each component and the basic working mechanisms in solar cells is important for further improvement in efficiency, especially for mesoscopic perovskite solar cells. Here, a two-dimensional modeling of the TiO 2 nanowire-based organic–inorganic hybrid perovskite solar cells was performed combining the optical and electrical responses to reveal the impact of the properties of TiO 2 nanowire array and absorber layer. Simulation results show a great dependence of device performance on the electron concentration of TiO 2 nanowires, which decided the electron field distribution inside cells, and an optimum thickness of 600 nm is obtained for the TiO 2 nanowires with low electron concentration. The collection of carriers is primarily within perovskite itself, and the ratio through TiO 2 nanowire is less than 5%. These findings can facilitate device optimization and enhance the performance of the perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
2. Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices10.1016/j.electacta.2015.02.195 ↗
3. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
4. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
5. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
6. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
7. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
8. Engineering of electron-selective contact for perovskite solar cells with efficiency exceeding 15%10.1021/nn5029828 ↗
9. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
10. Effect of mesostructured layer upon crystalline properties and device performance on perovskite solar cells10.1021/acs.jpclett.5b00483 ↗
11. Enhanced crystallinity in organic–inorganic lead halide perovskites on mesoporous TiO2 via disorder–order phase transition10.1021/cm501541p ↗
12. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
13. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
14. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
15. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
16. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
17. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
18. Unravelling the mechanism of photoinduced charge transfer processes in lead iodide perovskite solar cells10.1038/nphoton.2013.374 ↗
19. Device modeling of perovskite solar cells based on structural similarity with thin film inorganic semiconductor solar cells10.1063/1.4891982 ↗
20. Numerical simulation: toward the design of high-efficiency planar perovskite solar cells10.1063/1.4885367 ↗
21. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
22. The simulation of physical mechanism for HTM-free perovskite organic lead iodide planar heterojunction solar cells10.1088/2040-8978/17/10/105904 ↗
23. Two-dimensional device modeling of CH3NH3PbI3 based planar heterojunction perovskite solar cells10.1016/j.solener.2015.11.009 ↗
24. Optical description of mesostructured organic–inorganic halide perovskite solar cells10.1021/jz502351s ↗
25. Complex refractive index spectra of CH3NH3PbI3 perovskite thin films determined by spectroscopic ellipsometry and spectrophotometry10.1021/jz502471h ↗
26. Coupled optical and electronic modeling of dye-sensitized solar cells for steady-state parameter extraction10.1021/jp111565q ↗
27. Optical description of solid-state dye-sensitized solar cells. I. Measurement of layer optical properties10.1063/1.3204982 ↗
28. Electron–hole diffusion lengths exceeding 1µm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
29. Long-range balanced electronand hole-transport lengths in organic–inorganic CH3NH3PbI310.1126/science.1243167 ↗
30. Organo-metal perovskite based solar cells: sensitized versus planar architecture10.1039/C4RA03981E ↗
31. Improved understanding of the electronic and energetic landscapes of perovskite solar cells: high local charge carrier mobility, reduced recombination, and extremely shallow traps10.1021/ja506936f ↗
32. Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis10.1016/0013-4686(95)90400-W ↗
33. On the uniqueness of ideality factor and voltage exponent of perovskite-based solar cells10.1021/jz5021636 ↗
34. Electron and hole transport through mesoporous TiO2 infiltrated with spiro-MeOTAD10.1002/adma.200602085 ↗
35. Nondispersive hole transport in amorphous films of methoxy-spirofluorene-arylamine organic compound10.1063/1.1525866 ↗
36. Magneto absorption of the lowest exciton in perovskite-type compound CH3NH3PbI310.1016/0921-4526(94)91130-4 ↗
37. Investigating charge dynamics in halide perovskite-sensitized mesostructured solar cells10.1039/C3EE43991G ↗
38. Rutile TiO2-based perovskite solar cells10.1039/c4ta01786b ↗
39. Why lead methylammonium tri-iodide perovskite-based solar cells require a mesoporous electron transporting scaffold (but not necessarily a hole conductor)10.1021/nl404454h ↗
40. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
41. Sub-150°C processed meso-superstructured perovskite solar cells with enhanced efficiency10.1039/C3EE43707H ↗