journal article·2013-09

Experimental characterization and simulation of water vapor diffusion through various encapsulants used in PV modules

Namsu Kim, Changwoon Han

Publisher page

Abstract

Abstract Water vapor ingress significantly impacts the performance and the long-term reliability of copper indium gallium selenide photovoltaic modules. A cost effective packaging method that can protect photovoltaic modules from the operating environment is critical to their widespread commercialization. Due to the sensitivity of both the copper indium gallium selenide cells and the electrodes to water vapor, they need an encapsulant with low water vapor permeation as well as side sealing materials, resulting in a high cost of manufacturing. Hence, a packaging strategy without sealing materials is proposed with new encapsulant materials. In this study, the overall amount of permeated water vapor through ionomer and polyvinyl butyral encapsulants was investigated and compared with widely used encapsulants such as ethylene vinyl acetate. The diffusion and solubility coefficients were calculated from the experimentally determined water vapor transmission rate in both transient and steady state transport regimes. To understand the permeation mechanism of water vapor through the encapsulant, the temperature dependence of the diffusion and solubility coefficients was investigated. Based on experimentally determined permeation properties, the amount of water vapor absorption and the ingress speed into the PV module under a continuously varying environment were investigated. Ethylene vinyl acetate shows its excellence among encapsulants, when simply considering ingress speed of water vapor (slower permeation), while ionomer dominantly outperforms other materials, when focusing on the total amount of water absorption (less permeation).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. J.S. Britt, E. Kanto, S. Lundberg, M.E. Beck, CIGS device stability on flexible substrates, Photovoltaic Energy Conversion, Conference Record of the 2006 IEEE 4th World Conference IEEE, IEEE, 2006, pp. 352–355.10.1109/WCPEC.2006.279462 ↗
2. Influence of damp heat on the electrical properties of Cu(InGa)Se2 solar cells10.1016/S0040-6090(99)00820-2 ↗
3. Cu(InGa)Se2-based thin-film photovoltaic modules optimized for long-term performance10.1016/S0927-0248(02)00101-0 ↗
4. D.J. Coyle, H.A. Blaydes, J.E. Pickett, R.S. Northey, J.O. Gardner, Degradation kinetics of CIGS solar cells, Photovoltatic Specialists Conference, 34th IEEE, IEEE, 2009, pp. 1943–1947.10.1109/PVSC.2009.5411551 ↗
5. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗
6. Evaluation of encapsulant materials for PV applications
7. Silicon photovoltaic modules: a brief history of the first 50 years10.1002/pip.612 ↗
8. W.H.J. Holley, UV stability and module testing of nonbrowning experimental PV encapsulants, Photovoltaic Specialists Conference, 25th IEEE, IEEE, 1996, pp. 1259–1262.10.1109/PVSC.1996.564361 ↗
9. M.D. Kempe, Overview of scientific issues involved in selection of polymers for PV applications, Photovoltaic Specialists Conference, 37th IEEE, IEEE, 2011, pp. 85–90.10.1109/PVSC.2011.6185851 ↗
10. Inorganic layers on polymeric films—influence of defects and morphology on barrier properties10.1002/ceat.200390093 ↗
11. Crank · 1968
12. C.M. Berger, C.L. Henderson, Equilibrium sorption and rate of diffusion of water into photoresist thin films, Proceedings of SPIE, SPIE, 2003, pp. 984–995.10.1117/12.485079 ↗
13. Measurement of hydrogen isotope transport in poly(vinyl fluoride) films by the permeation-rate method10.1002/pol.1969.160070506 ↗
14. Diffusion of water through various polymer films: a new high performance method of characterization10.1016/S0142-9418(98)00052-X ↗
15. Permeametric and microgravimetric studies of sorption and diffusion of water vapor in an unsaturated polyester10.1016/S0032-3861(99)00434-6 ↗
16. Transport phenomena through polymeric systems10.1016/S0079-6700(00)00036-8 ↗
17. Influence of the glass transition temperature on solute diffusion in polymers by inverse glas chromatography10.1021/ie00047a037 ↗
18. Estimating diffusion coefficients for small molecules in polymers and polymer solutions10.1016/S0032-3861(00)00765-5 ↗
19. Diffusion in polymers below the glass transition temperature: Comparison of two approaches based on free volume concepts10.1007/BF02699046 ↗
20. Measuring temperature-dependent water vapor and gas permeation through high barrier films10.1063/1.3250866 ↗
21. E. Suloff, Sorption Behavior of an Aliphatic Series of Aldehydes in the Presence of Poly(ethylene terephthalate) Blends Containing Aldehyde Scavenging Agents, Virginia Institute of Technology, Virginia, USA, 2002.
22. Molecular modeling of temperature dependence of solbility parameters for amorphous polymers10.1007/s00894-011-1249-3 ↗
23. Experimental study of the effect of temperature on water solubility in natural rhyolite melt to 100MPa10.1093/petroj/40.10.1497 ↗
24. Numerical analysis on the thermal characteristics of photovoltaic module with ambient temperature variation10.1016/j.solmat.2010.05.016 ↗
25. Modelling of a double-glass photovoltaic module using finite differences10.1016/j.applthermaleng.2005.02.008 ↗