journal article·2015-01

On the growth process of Cu2ZnSn(S,Se)4 absorber layer formed by selenizing Cu–ZnS–SnS precursors and its photovoltaic performance

Jianjun Li, Yi Zhang, Hongxia Wang, Li Wu, Jiguo Wang, Wei Liu, Zhiqiang Zhou, Qing He, Yun Sun

Publisher page

Abstract

Abstract Sputtering and subsequent sulfurization (or selenization) is one of the methods that have been extensively employed to fabricate Cu 2 ZnSn(S,Se) 4 (CZTSSe) thin films. However, there are limited reports on the effect of precursor stacking order of the sputtered source materials on the properties of the synthesized CZTSSe films. In this work, the morphology and crystallization process of the CZTSSe films which were prepared by selenizing Cu–ZnS–SnS precursor layers with different stacking sequences and the adhesion property between the as-synthesized CZTSSe layer and Mo substrate have been thoroughly investigated. It has been found that the growth of CZTSSe material and the morphology of the film strongly depend on the location of Cu layer in the precursor film. The formation of CZTSSe starts from the diffusion of Cu–Se to Sn(S,Se) layer to form Cu–Sn–(S,Se) compound, followed by the reaction with Zn(S,Se). The investigation of the morphology of the CZTSSe films has shown that large grains are formed in the film with the precursor stacking order of Mo/SnS/ZnS/Cu, which is attributed to a bottom-to-top growth mechanism. In contrast, the film made from a precursor with a stacking sequence of Mo/ZnS/SnS/Cu is mainly consisted of small grains due to a top-to-bottom growth mechanism. The best CZTSSe solar cell with energy conversion efficiency of 3.35% has been achieved with the selenized Mo/ZnS/SnS/Cu film, which is attributed to a good contact between the absorber layer and the Mo substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Preferred orientation of Cu(In,Ga)Se2 thin film deposited on stainless steel substrate10.1002/pip.2164 ↗
2. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
3. The path towards a high-performance solution-processed kesterite sola rcell10.1016/j.solmat.2010.11.028 ↗
4. Progress in thin film solar cells based on Cu2ZnSnS410.1155/2011/801292 ↗
5. Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: first-principles insights10.1063/1.3074499 ↗
6. Phase selective synthesis of metastable orthorhombic Cu2ZnSnS410.1039/c2jm16870g ↗
7. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
8. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
9. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
10. Growth of Cu2ZnSnS4 thin films using sulfurization of stacked metallic films10.1016/j.tsf.2010.03.058 ↗
11. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
12. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
13. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
14. Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layers10.1016/j.tsf.2008.09.058 ↗
15. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
16. V. Chawl, B. Clemens, Effect of composition on high efficiency CZTSSe devices fabricated using co-sputtering of compound targets, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 2990 -2992.10.1109/PVSC.2012.6318212 ↗
17. Precursors׳ order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
18. Thermodynamic study of tin sulfide and lead sulfide using a mass spectrometer10.1063/1.1733223 ↗
19. The heat and free energy of formation and vaporization of stannous sulphide10.1039/tf9555101193 ↗
20. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
21. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
22. Study of Cu2ZnSnSe4 monograin formation in molten KI starting from binary chalcogenides10.1016/j.tsf.2011.01.365 ↗
23. Cu2Zn1−xCdxSn(Se1−ySy)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
24. Cu2ZnSnSe4 absorbers processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
25. Equilibrium composition of selenium vapor; the thermodynamics of the vaporization of HgSe, CdSe, and SrSe10.1063/1.1727488 ↗
26. Dean · 1999 · 537
27. Binnewies · 2002 · 810
28. The crystallization of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu–Zn–Sn precursors10.1016/j.tsf.2008.11.019 ↗
29. Chakrabarti · Bull. Alloy Ph. Diagr. · 1981 · 2 · 30510.1007/BF02868284 ↗
30. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
31. Three-stage growth of Cu–In–Se polycrystalline thin films by chemical spray pyrolysis10.1016/j.solmat.2006.06.063 ↗
32. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
33. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
34. Optical and electrical properties of SnSe2 and SnSe thin films prepared by spray pyrolysis10.1016/j.tsf.2012.12.081 ↗
35. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells
36. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
37. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface10.1063/1.4863736 ↗