Development and experiment on the performance of polymeric hybrid Photovoltaic Thermal (PVT) collector with halogen solar simulator
Source abstract
Abstract
Abstract The aim of our study is to see the performance of polymeric hybrid PVT collectors, which will be used to analyze the effects of Joule heating on the thermal performance of hybrid PVT collectors, especially for indoor experiments. Polymeric material has been used in hybrid PVT collectors and even longer used on flat plate collectors, generally for solar energy applications. We have developed a hybrid PVT collector with an absorber made of polymethyl methacrylate (PMMA) combined with copper sheet. We use PMMA because it is easier to make and assemble into a hybrid PVT. In addition, PMMA also has excellent properties in optical transmittance, ultraviolet resistance, and referred absorbtance. In order to understand the details of the thermal and electrical performance of this polymeric PVT collector, we have conducted a series of four experiments by varying the mass flow rate, irradiance, and inlet water temperature. The results showed that PMMA as a thermal absorber with a copper sheet on a PVT collector can provide a beneficial cooling effect of around 80% thermal efficiency and a 0.03%/oC decrease in electrical efficiency. A steady state was reached about 30 min from the start of the experiment with a deviation of less than 4%, giving the optimum PVT efficiency at T p v of 40–45 oC. Overall, PMMA can be used as an excellent alternative absorber for T-part in hybrid PVT collectors and is suitable for low-temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Kerns · 1978
2. A review on recent advancements in photovoltaic thermal techniques10.1016/j.rser.2017.03.075 ↗
3. A Review of Polymer Materials for solar water heating systems
4. Polymers for solar domestic hot water: long-term performance of PB and nylon 6,6 tubing in hot water10.1115/1.1638786 ↗
5. A total cost perspective on use of polymeric materials in solar collectors - importance of environmental performance on suitability10.1016/j.apenergy.2014.03.027 ↗
6. Lifetime modeling of polypropylene absorber materials for overheating protected hot water collectors10.1016/j.solener.2015.12.035 ↗
7. Köhl · 2012
8. IEA-SHC
9. Structure – property correlations of polymeric films for transparent insulation wall applications
10. Degradation model for an extruded polymeric solar thermal absorber10.1016/j.solmat.2010.02.001 ↗
11. A photovoltaic/thermal (PV/T) collector with a polymer absorber plate. Experimental study and analytical model10.1016/S0038-092X(01)00091-3 ↗
12. Thermal behavior of a copolymer PV/Th solar system in low flow rate conditions10.1016/j.solener.2009.01.008 ↗
13. CFD modeling of a polymer solar collector10.1016/j.renene.2010.01.004 ↗
14. Optimization of the design of a polymer flat plate solar collector10.1016/j.solener.2012.10.006 ↗
15. Polymer solar collectors . a better alternative to heat water in Mexican10.1016/j.egypro.2014.10.187 ↗
16. Performance optimisation of polymeric collectors by means of dynamic simulation and sensitivity analysis10.1016/j.egypro.2014.02.023 ↗
17. Polymeric materials for solar energy utilization: a comparative experimental study and environmental aspects10.1080/03602559.2014.974185 ↗
18. Comparative field experimental investigations of different flat plate solar collectors10.1016/j.solener.2015.03.021 ↗
19. Investigation of the heat transfer behaviour of a polymer solar collector for different manifold con fi gurations10.1016/j.renene.2014.03.008 ↗
20. Thermal modeling of photovoltaic thermal system with polymer sheet in tube Absorber collector
21. Performance evaluation of the Senergy polycarbonate and asphalt carbon nanotube solar water heating collectors for building integration
22. Use of plastics in solar energy applications10.1016/0038-092X(78)90010-5 ↗
23. Design, modeling and performance analysis of dual channel semitransparent photovoltaic thermal hybrid module in the cold environment10.1016/j.enconman.2016.02.023 ↗
24. Uniformity characteristic and calibration of simple low cost compact halogen solar simulator for indoor experiments
25. Structure – property correlations of polymeric films for transparent insulation wall applications
26. Aging of polymeric films for transparent insulation wall applications
27. A review of thermal absorbers and their integration methods for the combined solar photovoltaic/thermal (PV/T) modules10.1016/j.rser.2016.11.063 ↗
28. Optical study of perylene dye doped poly(methyl methacrylate) as fluorescent solar collector10.1002/pi.857 ↗
29. Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover10.1016/j.apenergy.2008.04.016 ↗
30. Selection of thermotropic materials for overheat protection of polymer absorbers10.1016/j.solener.2013.10.026 ↗
31. The effect of Joule heating to thermal performance of hybrid PVT collector during electricity generation10.1016/j.renene.2017.03.094 ↗
32. Duffie · 2013
33. Temperature dependence of solar cell performance - an analysis10.1016/j.solmat.2012.02.019 ↗
34. On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
35. A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting10.1016/j.solmat.2008.05.016 ↗
36. Photovoltaic solar panel for a hybrid PV/thermal system10.1016/j.solmat.2004.01.022 ↗
37. Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world - a review10.1016/j.egypro.2013.05.072 ↗
38. Polymeric materials in solar-thermal systems - performance requirements and loads10.1016/j.egypro.2016.06.182 ↗
39. Design, fabrication, and measurement of a polymer-based anti-reflection coating for improved performance of a solar panel under a specific incident angle10.1016/j.solmat.2018.10.001 ↗
40. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗