journal article·2014-01

Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests

Hannes Klumbies, Markus Karl, Martin Hermenau, Roland Rösch, Marco Seeland, Harald Hoppe, Lars Müller-Meskamp, Karl Leo

Publisher page

Abstract

Abstract The degradation of non-encapsulated, small-molecule organic solar cells based on ZnPc (zinc phthalocyanine)/C 60 with an aluminum top electrode is investigated under different climate conditions and correlated with the water barrier performance of the aluminum electrode layer. The degradation of the solar cells turns out to be dominated by water and can be well predicted by the corrosion of calcium – a sensor for water – under the same conditions. By several independent techniques, an amount of 20±7 mg(H 2 O) m −2 is determined to reduce the solar cell efficiency to 50% of the initial value, independent of humidity and temperature between 20 and 65 °C. This experimental value for degradation sensitivity of an organic solar cell allows to translate the encapsulation requirements of the solar cell into a well-defined, objective quantity and allows to predict device lifetimes for different permeation barriers. Furthermore, electroluminescence imaging shows that the degradation is caused solely from a loss of active area caused by water ingress through defects in the aluminum top electrode. For this type of barrier, most of the permeation (>72%) through the aluminum is thus caused by defects with a radius r >0.3 µm visible with an optical microscope. Hence, the water ingress through the aluminum top electrode and in turn the lifetime of the organic PV cell can be well predicted by a simple optical inspection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Heliatek GmbH, Heliatek press release from January, (2013).
2. Long-term stability of tandem solar cells containing small organic molecules10.1016/j.solmat.2007.12.001 ↗
3. Oxide sandwiched metal thin-film electrodes for long-term stable organic solar cells10.1002/adfm.201201592 ↗
4. Improved efficiency and lifetime in small molecule organic solar cells with optimized conductive polymer electrodes10.1063/1.3634015 ↗
5. Tetrapropyl-tetraphenyl-diindenoperylene derivative as a green absorber for high-voltage stable organic solar cells10.1103/PhysRevB.83.165305 ↗
6. Polymer solar cells with enhanced lifetime by improved electrode stability and sealing10.1016/j.solmat.2013.05.013 ↗
7. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: by oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
8. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
9. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
10. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
11. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
12. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
13. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
14. Investigation of C60F36 as low-volatility p-dopant in organic optoelectronic devices10.1063/1.3590142 ↗
15. Electrical calcium test for moisture barrier evaluation for organic devices.10.1063/1.3633956 ↗
16. zur Bestimmung der relativen Luftfeuchtigkeit über gesättigten wässerigen Salzlösungen und wässerigen Schwefelsäurelösungen bei verschiedenen Temperaturen10.1007/BF02627216 ↗
17. Luminescence imaging of polymer solar cells: Visualization of progressing degradation10.1063/1.3553864 ↗
18. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
19. Study of thin calcium electrode degradation by ion beam analysis10.1016/j.nimb.2006.06.014 ↗
20. Low moisture permeation measurement through polymer substrates for organic light emitting devices10.1016/S0040-6090(02)00584-9 ↗
21. Permeation rate measurements by electrical analysis of calcium corrosion10.1063/1.1626015 ↗
22. High-sensitivity permeation measurements on flexible OLED substrates10.1117/12.510027 ↗
23. The influence of laterally inhomogeneous corrosion on electrical and optical calcium moisture barrier characterization.10.1063/1.4791798 ↗
24. Ultra barrier flexible substrates for flat panel displays10.1016/S0141-9382(00)00064-0 ↗
25. Water-induced degradation of polymer solar cells studied by H2(18)O labeling.10.1021/am800039w ↗