journal article·2014-01

Preparation and characterization of MoO3 hole-injection layer for organic solar cell fabrication and optimization

Guojie Wang, Tonggang Jiu, Pandeng Li, Jun Li, Chunming Sun, Fushen Lu, Junfeng Fang

Publisher page

Abstract

Abstract A facile, solution-processed method to fabricate MoO 3 (s-MoO 3 ) thin film as hole-injection layer (HIL) for poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl-C 61 -butyric acid methyl ester (PC 61 BM) based organic bulk hetero-junction photovoltaics is presented. The structural, electronic property and surface microstructure of the s-MoO 3 thin film are investigated in detail by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, scanning electron microscopy and atomic force microscope. The results indicate that the s-MoO 3 thin film possesses appropriate morphological, optical and electronic properties to be suitable for organic photovoltaic applications. The photovoltaic devices have been investigated and optimized in detail by tuning layer thickness, processing temperature and time, annealing conditions of interfacial layers. Using s-MoO 3 thin film as hole-injection layer, the device gives open circuit voltage of 0.64 V, circuit current density of 9.15 mA cm −2 , fill factor of 0.67 and power conversion efficiency of 3.92%, which is higher than the controlled device using PEDOT:PSS layer. In addition, the s-MoO 3 based devices exhibit good stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
2. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. The case for organic photovoltaics10.1039/c3ra42989j ↗
6. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
7. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
8. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
9. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
10. Small molecules based on benzo[1,2-b:4,5-b′]dithiophene unit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
11. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
12. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
13. Nanostructure of the interpenetrating networks in poly(3-hexylthiophene)/fullerene bulk heterojunction materials: implications for charge transport10.1002/adma.200700019 ↗
14. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗
15. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester system10.1021/cr300005u ↗
16. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
17. How to model the behaviour of organic photovoltaic cells10.1002/pi.2038 ↗
18. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
19. Degradation mechanisms in small-molecule and polymer organic light-emitting diodes10.1002/adma.200902624 ↗
20. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
21. Interface materials for organic solar cells10.1039/b921624c ↗
22. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
23. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
24. In diffusion and electronic energy structure in polymer layers on In tin oxide10.1016/j.tsf.2011.02.034 ↗
25. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
26. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
27. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
28. Anode interfacial tuning via electron-blocking/hole-transport layers and indium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
29. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
30. High shunt resistance in polymer solar cells comprising a MoO3 hole extraction layer processed from nanoparticle suspension10.1063/1.3601921 ↗
31. Inorganic solution-processed hole-injecting and electron-blocking layers in polymer light-emitting diodes10.1063/1.1522812 ↗
32. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
33. Highly efficient simplified organic light emitting diodes10.1063/1.2784176 ↗
34. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
35. High-performance and highly durable inverted organic photovoltaics embedding solution-processable vanadium oxides as an interfacial hole-transporting layer10.1002/adma.201102142 ↗
36. Solution processed vanadium pentoxide as charge extraction layer for organic solar cells10.1002/aenm.201100076 ↗
37. Enhanced efficiency in plastic solar cells via energy matched solution processed NiOx interlayers10.1002/aenm.201100234 ↗
38. Enhanced charge carrier mobility in two-dimensional high dielectric molybdenum oxide10.1002/adma.201203346 ↗
39. Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer10.1039/C2TA00325B ↗
40. A solution-processed MoOx anode interlayer for use within organic photovoltaic devices10.1002/adfm.201102622 ↗
41. Aqueous solution-processed MoO3 as an effective interfacial layer in polymer/fullerene based organic solar cells10.1016/j.orgel.2012.12.016 ↗
42. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
43. Efficient Polymer Solar Cells Based on poly(3-hexylthiophene):indene-C70 Bisadduct with a MoO3 buffer layer10.1002/adfm.201102054 ↗
44. Improved current extraction from ZnO/PbS quantum dot heterojunction photovoltaics using a MoO3 interfacial layer10.1021/nl201472u ↗
45. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
46. Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer10.1016/j.solmat.2010.01.004 ↗
47. Solution processed MoO3 interfacial layer for organic photovoltaics prepared by a facile synthesis method10.1002/adma.201104771 ↗
48. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
49. Polymer solar cells with a low-temperature-annealed sol–gel-derived MoOx film as a hole extraction layer10.1002/aenm.201100598 ↗
50. Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics10.1039/c2jm14911g ↗
51. Electrochemical preparation of MoO3 buffer layer deposited onto the anode in organic solar cells10.1002/pssa.200925602 ↗
52. Low-temperature solution-processed molybdenum oxide nanoparticle hole transport layers for organic photovoltaic devices10.1002/aenm.201200229 ↗
53. Low-temperature solution-processed hydrogen molybdenum and vanadium bronzes for an efficient hole-transport layer in organic electronics10.1002/adma.201204425 ↗
54. Iteratively derived optical constants of MoO3 polycrystalline thin films prepared by CVD10.1016/S0040-6090(97)00092-8 ↗
55. Spectroscopic ellipsometry study of CVD molybdenum oxide films: effect of temperature10.1007/s10008-002-0285-4 ↗
56. P-type doping of organic wide band gap materials by transition metal oxides: a case-study on molybdenum trioxide10.1016/j.orgel.2009.05.007 ↗
57. Origin of hole selectivity and the role of defects in low-temperature solution-processed molybdenum oxide interfacial layer for organic solar cells10.1021/jp303679y ↗
58. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
59. Energy level evolution of molybdenum trioxide interlayer between indium tin oxide and organic semiconductor10.1063/1.3309600 ↗
60. Interfacial charge transfer and charge generation in organic electronic devices10.1016/j.orgel.2011.01.001 ↗
61. Effects of oxidation state and crystallinity of tungsten oxide interlayer on photovoltaic property in bulk hetero-junction solar cell10.1021/jp2122505 ↗
62. Thermally stable efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
63. Low-temperature, solution-processed hole selective layers for polymer solar cells10.1021/am302878m ↗
64. Low-temperature, solution-processed MoOx for efficient and stable organic solar cells10.1021/am201825t ↗