journal article·2021-06Open access

Controlled spalling-based mechanical substrate exfoliation for III-V solar cells: A review

Jie Chen, Corinne E. Packard

Abstract

Abstract Controlled spalling is a fast process that can mechanically exfoliate III-V semiconductor layers from their host wafer substrates and has the potential to produce high power-density, flexible, III-V solar cells at large scale. The controlled spalling system is typically composed of three parts: a brittle substrate with or without epitaxial growth layers, a tough stressor layer deposited on top, and a handle layer. Controlled spalling is achieved by tuning the stress and thickness of the stressor layer and the peeling force applied by the handle layer to overcome the cohesive energy of the substrate, resulting in propagation of a crack parallel to the surface of the substrate. Proof-of-principle device demonstrations, at wafer scale and in multiple configurations, show no loss of performance compared to conventionally processed devices while preserving the wafer for reuse, reclaim, or recycling for cost and material savings. This review summarizes advances in controlled spalling as it relates specifically to III-V solar cells, covering advances in spalling-related methods development, process modeling and control, fracture surface morphology, and device processing and performance. Opportunities for controlled spalling of III-V materials and remaining challenges for achieving reliable process integration are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. 2020
2. Radiation-resistant solar cells for space use10.1016/S0927-0248(00)00344-5 ↗
3. Temperature dependence of solar cell performance—an analysis10.1016/j.solmat.2012.02.019 ↗
4. III-V compounds for solar cell applications10.1007/s003390050983 ↗
5. Pathways for solar photovoltaics10.1039/C4EE04073B ↗
6. Techno‐economic analysis of three different substrate removal and reuse strategies for III‐V solar cells10.1002/pip.2776 ↗
7. Goodrich · 2013
8. GaAs solar cells on nanopatterned Si substrates10.1109/JPHOTOV.2018.2871423 ↗
9. Heteroepitaxial technologies of III–V on Si10.1016/S0927-0248(00)00209-9 ↗
10. Flexible GaAs solar cells on roll-to-roll processed epitaxial Ge films on metal foils: a route towards low-cost and high-performance III–V photovoltaics10.1039/C8EE02553C ↗
11. Impact of threading dislocations on the design of GaAs and InGaP/GaAs solar cells on Si using finite element analysis10.1109/JPHOTOV.2012.2213073 ↗
12. Effects of grain boundaries on conversion efficiencies of single-crystal-like GaAs thin-film solar cells on flexible metal tapes10.1016/j.solmat.2019.04.032 ↗
13. Gao · 2016
14. Kasap · 2001
15. Improved radiation resistance of epitaxial lift-off inverted metamorphic solar cells
16. Lightweight flexible space solar arrays, past, present and future
17. Scheiman · 2016 · 1095
18. Recent progress in flexible–wearable solar cells for self-powered electronic devices10.1039/C9EE03046H ↗
19. Layer transfer by controlled spalling10.1088/0022-3727/46/15/152002 ↗
20. Kerf-less removal of Si, Ge, and III–V layers by controlled spalling to enable low-cost PV technologies10.1109/JPHOTOV.2012.2184267 ↗
21. Controlled spalling technology
22. Laser liftoff of gallium arsenide thin films10.1557/mrc.2015.2 ↗
23. Laser-assisted spalling of large-area semiconductor and solid state substrates10.1557/mrc.2017.136 ↗
24. High efficiency GaAs thin film solar cells by peeled film technology10.1016/0022-0248(78)90449-9 ↗
25. Recent progress in epitaxial lift-off solar cells
26. Very high specific power ELO solar cells (>3 kW/kg) for UAV, space, and portable power applications
27. Epitaxial layer transfer by bond and etch back of porous Si10.1063/1.111698 ↗
28. Lift-off of free-standing layers in the kerfless porous silicon process10.1016/j.egypro.2013.07.365 ↗
29. Multilayer etching for kerf-free solar cells from macroporous silicon10.1016/j.egypro.2013.07.367 ↗
30. Germanium-on-Nothing for epitaxial liftoff of GaAs solar cells10.1016/j.joule.2019.05.013 ↗
31. Remote epitaxy through graphene enables two-dimensional material-based layer transfer10.1038/nature22053 ↗
32. Integration of bulk materials with two-dimensional materials for physical coupling and applications10.1038/s41563-019-0335-2 ↗
33. Laser transfer, printing, and assembly techniques for flexible electronics10.1002/aelm.201800900 ↗
34. The influences of laser scanning speed on the structural and optical properties of thin GaN films separated from sapphire substrates by excimer laser lift-off10.1088/0022-3727/42/4/045414 ↗
35. Study of the structural damage in the (0001) GaN epilayer processed by laser lift-off techniques10.1063/1.2783134 ↗
36. Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics10.1038/ncomms2583 ↗
37. Wafer reuse for repeated growth of III–V solar cells10.1002/pip.930 ↗
38. Arsenic formation on GaAs during etching in HF solutions: relevance for the epitaxial lift-off process10.1149/2.006303jss ↗
39. Internal stress-assisted epitaxial lift-off process for flexible thin film (In)GaAs solar cells on metal foil10.1063/1.5001357 ↗
40. New approach for the formation and separation of a thin porous silicon layer10.1002/1521-396X(200011)182:1<97::AID-PSSA97>3.0.CO;2-L ↗
41. Mesoporous germanium morphology transformation for lift-off process and substrate re-use10.1063/1.4775357 ↗
42. Fast growth synthesis of mesoporous germanium films by high frequency bipolar electrochemical etching10.1016/j.electacta.2017.02.115 ↗
43. Reformed mesoporous Ge for substrate reuse in III-V solar cells
44. Enhanced efficiency of crystalline Si solar cells based on kerfless-thin wafers with nanohole arrays10.1038/s41598-018-21381-2 ↗
45. InP-based composite substrates for four junction concentrator solar cells10.1063/1.4931520 ↗
46. Cold split kerf-free wafering results for doped 4H-SiC boules10.4028/www.scientific.net/MSF.963.10 ↗
47. Thermomechanical spalling of epitaxially grown silicon from porosified substrates10.1016/j.egypro.2016.07.096 ↗
48. Lee · 2020
49. A new technique of forming thin free standing single-crystal films10.1149/1.2113872 ↗
50. Kerf-free wafer slicing and thinning for semiconductor applications
51. Farah · 2014 · 1796
52. Bedell · 2010
53. Bedell · 2012
54. Steady-state cracking in brittle substrates beneath adherent films10.1016/0020-7683(89)90096-6 ↗
55. Ward · 2018
56. Advanced flexible electronics: challenges and opportunities
57. Layer transfer of bulk gallium nitride by controlled spalling10.1063/1.4986646 ↗
58. Vertical light-emitting diode fabrication by controlled spalling10.7567/APEX.6.112301 ↗
59. Ultralight high-efficiency flexible InGaP/(In)GaAs tandem solar cells on plastic10.1002/aenm.201200827 ↗
60. Extremely flexible nanoscale ultrathin body silicon integrated circuits on plastic10.1021/nl304310x ↗
61. Hull · 1999
62. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
63. The edge cracking and spalling of brittle plates10.1016/0001-6160(87)90015-0 ↗
64. Analysis of stress intensity factors and T-stress to control crack propagation for kerf-less spalling of single crystal silicon foils10.1016/j.commatsci.2012.10.033 ↗
65. Effect of the laser-scribing on spalling of a single crystalline Si using electrodeposition assisted stripping (EAS) process10.1166/jnn.2016.13216 ↗
66. T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: a unified approach using the interaction integral method10.1016/S0045-7825(02)00652-7 ↗
67. A review of T-stress and its effects in fracture mechanics10.1016/j.engfracmech.2014.10.013 ↗
68. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
69. Slightly curved or kinked cracks10.1007/BF00012619 ↗
70. Analytic model of spalling technique for thickness-controlled separation of single-crystalline semiconductor layers10.1016/j.sse.2019.107660 ↗
71. Spalling of a thin Si layer by electrodeposit-assisted stripping10.7567/APEX.6.116502 ↗
72. The fracture of brittle thin films on compliant substrates in flexible displays10.1016/S0013-7944(01)00104-7 ↗
73. Comparative investigation of fracture behaviour of aluminium-doped ZnO films on a flexible substrate10.1088/0022-3727/42/17/175404 ↗
74. On the mechanical behavior of brittle coatings and layers10.1007/BF00656841 ↗
75. On the mechanics of delamination and spalling in compressed films10.1016/0020-7683(84)90012-X ↗
76. Biocompatible and sustainable power supply for self-powered wearable and implantable electronics using III-nitride thin-film-based flexible piezoelectric generator10.1016/j.nanoen.2018.12.080 ↗
77. Rogers · 2016
78. Residual stresses in metal/ceramic bonded strips10.1111/j.1151-2916.1985.tb15316.x ↗
79. Modeling of elastic deformation of multilayers due to residual stress and external bending10.1063/1.1478137 ↗
80. Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm10.1073/pnas.1317233111 ↗
81. DuPont · 2019
82. Nhamoinesu · 2012 · 293
83. Crouse · 2017
84. Sweet · 2016
85. Hardness and fracture toughness of semiconducting materials studied by indentation and erosion techniques10.1016/0025-5416(88)90489-2 ↗
86. Stress-induced large-area lift-off of crystalline Si films10.1007/s00339-007-4195-2 ↗
87. Epoxy-Induced spalling of silicon10.1016/j.egypro.2012.07.111 ↗
88. Directional heating and cooling for controlled spalling10.1109/JPHOTOV.2014.2371233 ↗
89. Mechanical strength and reliability of a novel thin monocrystalline silicon solar cell
90. Intrinsic stress in sputter-deposited thin films10.1080/10408439208244586 ↗
91. Intrinsic stress in evaporated metal films10.1149/1.2411441 ↗
92. A kinetic analysis of residual stress evolution in polycrystalline thin films10.1016/j.tsf.2012.11.001 ↗
93. Kinetic model for thin film stress including the effect of grain growth10.1063/1.5030740 ↗
94. The effects of plating current, grain size, and electrolyte on stress evolution in electrodeposited Ni10.1149/2.0261901jes ↗
95. The origins of stress in thin nickel films10.1016/0040-6090(72)90396-3 ↗
96. Hydrogen desorption and internal stress in nickel coatings obtained by periodic electrodeposition10.1149/1.2069098 ↗
97. Microscopic mechanism of the hydrogen effect on the ductility of electroless copper10.1016/0001-6160(88)90234-9 ↗
98. Stressed electrolytically deposited bright nickel coatings obtained during the cathodic formation and decomposition of nickel hydride in acidic media10.1016/0376-4583(82)90069-3 ↗
99. Stresses and failure modes in thin films and multilayers
100. Comparative study of stress inducing layers to produce kerfless thin wafers by the Slim-cut technique