Enhancing passive radiative cooling properties of flexible CIGS solar cells for space applications using single layer silicon oxycarbonitride films
Source abstract
Abstract
Satellites in lower earth orbits have been primarily powered by photovoltaic modules. With growing power demand for new satellite concepts, solar cells are required to be flexible and ultra-lightweight to decrease launch costs. CIGS thin film solar technology is a promising candidate, since it can be manufactured on flexible substrates and possesses high radiation hardness. Poor radiative properties of CIGS on the other hand, lead to high temperatures and therefore power loss. High emissivity coatings on CIGS have already been reported but the influence on thermal and electrical aspects have not been addressed. Here we present the optical properties of silicon-oxycarbonitride coatings and their effect on electrical parameters on CIGS cells to be used for the DLR's GoSolAr power sail mission. We show that the single layer coating can significantly increase emissivity from 0.3 to 0.72, with minimal spectral losses and negligible impact on the functioning of the underlying CIGS cell. We simulated the thermal impact of the coating on solar cells in orbit and can predict that the maximum temperature of the cells is reduced by 30 °C, resulting in a significant power gain. Additionally, the coating has an emissivity of 0.87 in the atmospheric window of 8–13 μm making it a very good passive radiative cooler for terrestrial solar cells. The low-cost coating can replace glass and the process can be scaled up for large CIGS modules. The coating can also significantly increase the power to mass ratio of solar modules, reducing costs for space applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A solar electric propulsion cargo vehicle to support NASA lunar exploration program
2. Flexible Cu(In,Ga)Se2 thin-film solar cells for space application10.1016/j.tsf.2005.11.068 ↗
3. Radiation effects in space on solar cells developed for terrestrial use demonstrated by MDS-1, 3rd World Conference on
4. Super radiation tolerance of CIGS solar cells demonstrated in space by MDS-1 satellite
5. Kawakita · 2011
6. Consequence of 3-MeV electron irradiation on the photovoltaic output parameters of Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(03)00181-0 ↗
7. In-situ measurement of degradation of Cu(In,Ga)Se2 thin film solar cells during electron and proton irradiations
8. SiO2 and Al2O3/SiO2 coatings for increasing emissivity of Cu(In, Ga)Se2 thin-film solar cells for space applications10.1016/j.tsf.2007.07.159 ↗
9. Evaluation of thin-film solar cell temperature coefficients for space applications10.1002/pip.602 ↗
10. GoSolAr – a gossamer solar array concept for high power spacecraft applications using flexible photovoltaics
11. Concept for a Gossamer solar power array using thin-film photovoltaics10.1007/s12567-019-00276-6 ↗
12. J.T. Grundmann, P. Spietz, P. Seefeldt, T. Spröwitz, GOSSAMER deployment systems for flexible photovoltaic, in: 67th International Astronautical Congress.
13. Thin-film silazane/alumina high emissivity double layer coatings for flexible Cu(In,Ga)Se 2 solar cells10.1016/j.solmat.2014.09.015 ↗
14. High emissivity coatings based on polysilazanes for flexible Cu(In,Ga)Se2 thin-film solar cells10.1016/j.solmat.2014.01.027 ↗
15. A polysilazane coating protecting polyimide from atomic oxygen and vacuum ultraviolet radiation erosion10.1016/j.surfcoat.2009.04.019 ↗
16. Perhydropolysilazane derived silica coating protecting Kapton from atomic oxygen attack10.1016/j.tsf.2011.10.011 ↗
17. A comprehensive photonic approach for solar cell cooling10.1021/acsphotonics.7b00089 ↗
18. Passive radiative cooling design with broadband optical thin-film filters10.1016/j.jqsrt.2017.03.046 ↗
19. Radiative cooling: principles, progress, and potentials10.1002/advs.201500360 ↗
20. Nanophotonic engineering of far-field thermal emitters10.1038/s41563-019-0363-y ↗
21. 2008
22. Dragging of a liquid by a moving plate
23. Polymeric and ceramic silicon-based coatings-a review10.1039/C8TA09054H ↗
24. A technique for converting perhydropolysilazane to SiOx at low temperature
25. Control of surface energy of silicon oxynitride films10.1021/la304307y ↗
26. Preparation of moisture curable polysilazane coatings: Part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy10.1016/j.porgcoat.2005.02.006 ↗
27. Polysilazane-based coatings: corrosion protection and anti-graffiti properties10.1080/02670844.2018.1465748 ↗
28. Synthesis of fluorine-modified polysilazanes via Si–H bond activation and their application as protective hydrophobic coatings10.1039/C7TA07687H ↗
29. Preparation and gas barrier characteristics of polysilazane-derived silica thin films using ultraviolet irradiation10.4236/msa.2014.53015 ↗
30. Effect of Na-Montmorillonite sonication on the protective properties of hybrid silica coatings10.1016/j.electacta.2013.11.006 ↗
31. Polymer-derived ceramics: 40 Years of Research and innovation in advanced ceramics