journal article·2018-06

Optimization of DMSO-based precursor solution by H2O additive for performance enhancement of kesterite photovoltaic devices

Yun Zhao, Xiuxun Han, Le Chang, Jiajia Li, Chen Dong, Yi Fang, Junshuai Li

Publisher page

Abstract

Abstract Dimethyl sulfoxide (DMSO) based solution has been proven promising in preparing high-quality Cu2ZnSn(S,Se)4 (CZTSSe) absorbers. In the present work, H2O is used as a simple and effective additive to optimize the film formation of DMSO based CZTS precursor. It is demonstrated that a small amount of H2O introduction into the DMSO solution reduced the oxygen content in the CZTS precursor film, and thus limited the formation of SeO2/Sn(O,Se)x secondary phase in the final CZTSSe layer. As a result of improved morphology and carrier collection ability of absorber layer, the power conversion efficiency (PCE) is enhanced significantly from 7.45% for CZTSSe solar cell device prepared with pure DMSO precursor solution to 9.30% for that with an optimized DMSO/H2O ratio. Applying the same preparing strategy to the Ag containing CZTSSe device, we finally achieved a PCE of 10.3% under 1-sun illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
2. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
3. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
4. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
7. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
8. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
9. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
10. 10% efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
11. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
12. Recent trends in direct solution coating of kesterite absorber layers in solar cells10.1016/j.solmat.2013.06.038 ↗
13. Surface modification through air annealing Cu2ZnSn(S,Se)4 absorbers10.1016/j.tsf.2016.08.030 ↗
14. Cliff-like conduction band offset and KCN-induced recombination barrier enhancement at the CdS/Cu2ZnSnS4 thin-film solar cell heterojunction10.1063/1.3663327 ↗
15. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
16. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
17. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
18. Cu-rich precursors improve kesterite solar cells10.1002/aenm.201300543 ↗
19. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1-x)4 based solar cells10.1016/j.tsf.2014.10.058 ↗
20. Impact of nanoscale elemental distribution in high-performance kesterite solar cells10.1002/aenm.201402180 ↗
21. Interface redox engineering of Cu(In,Ga)Se2-based solar cells: oxygen, sodium, and chemical bath effects10.1016/S0040-6090(99)00768-3 ↗
22. Electronic and elemental properties of the Cu2ZnSn(S,Se)4 surface and grain boundaries10.1063/1.4862791 ↗
23. 11.2% efficient solution processed kesterite solar cell with a low voltage Deficit10.1002/aenm.201500712 ↗
24. 8% efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
25. Cu2ZnSnSe4 absorbers processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
26. Influence of pH on structural, optical and electrical properties of solution processed Cu2ZnSnS4 thin film absorbers10.1016/j.mssp.2015.12.011 ↗
27. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
28. Pre-annealing induced oxide barrier to suppress the over-selenization of Mo contact
29. Enhancing open-circuit voltage of solution-processed Cu2ZnSn(S,Se)4 solar cells with Ag substitution10.1109/JPHOTOV.2017.2675993 ↗
30. Formation and impact of secondary phases in Cu-poor Zn-rich Cu2ZnSn(S1−ySey)4 (0≤y≤1) based solar cells10.1016/j.solmat.2015.04.023 ↗
31. Pressure-Induced Structural Deformations in SeO210.1006/jssc.2002.9708 ↗
32. Synthesis of the Cu2ZnSn(S,Se)4 alloys with tunable phase structure and composition via a novel non-toxic solution method10.1039/c3ra45094e ↗
33. Wagner · 1979
34. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
35. Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
36. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
37. The performance of the donor and acceptor doping in the Cu-rich Cu2ZnSnSe4 bulks with different Zn/Sn ratios10.1016/j.ssc.2013.04.006 ↗
38. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
39. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
40. The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗