A comparative performance evaluation and sensitivity analysis of a photovoltaic-thermal system with radiative cooling
Source abstract
Abstract
Abstract Radiative cooling (RC) of solar cells has received growing attention in recent years primarily due to its passive nature as compared to the other active cooling techniques. By using novel high emittance materials, the RC technique can also be integrated with a photovoltaic-thermal (PVT) system, to eventually improve the system's total efficiency (electrical and thermal output) during the day and provide additional cooling power at night. To quantify the effect of enhanced RC in a PVT system, this study investigated the performance of a regular glass encapsulated PVT module, and a spectrally modified module by using a polydimethylsiloxane coating on top of the glass layer to simulate enhanced RC. An experimentally validated simulation model was developed for performance comparison. Furthermore, a sensitivity analysis was conducted to investigate the influence of varying input parameters on system output performance. Results show that during the day, solar cell operating temperature reduced by most 1.7 °C, and electrical efficiency and total exergy efficiency increased by 0.76% and 0.5%, respectively. As for nighttime, an additional 4–7 W/m2 cooling power can be obtained. Although some improvements, the potential gains achieved by integrating enhanced RC in PVT systems are not substantially large as compared to the regular glass encapsulation in commercial PVT modules, since glass naturally has a fairly high emittance in the atmospheric window.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Wang · 2016
2. On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
3. Assessing photovoltaic module degradation and lifetime from long term environmental tests
4. Radiative cooling: a review of fundamentals, materials, applications, and prospects10.1016/j.apenergy.2018.12.018 ↗
5. A review of clear sky radiative cooling developments and applications in renewable power systems and passive building cooling10.1016/j.solmat.2018.01.015 ↗
6. Radiative sky cooling: fundamental principles, materials, and applications10.1063/1.5087281 ↗
7. Daytime passive radiative cooling by ultra emissive bio-inspired polymeric surface
8. Heat pipe-based cooling systems for photovoltaic cells under concentrated solar radiation10.1016/1359-4311(95)00012-3 ↗
9. Improving thermodynamic performance parameters of silicon photovoltaic cells via air cooling10.1080/01430750.2013.793481 ↗
10. Performance optimization of water-cooled concentrated photovoltaic system10.1080/01457632.2015.1042344 ↗
11. Phase change materials for limiting temperature rise in building integrated photovoltaics10.1016/j.solener.2005.10.006 ↗
12. A novel multi-layer manifold microchannel cooling system for concentrating photovoltaic cells10.1016/j.enconman.2014.09.046 ↗
13. Direct liquid-immersion cooling of concentrator silicon solar cells in a linear concentrating photovoltaic receiver10.1016/j.energy.2013.11.063 ↗
14. Radiative cooling of solar cells10.1364/OPTICA.1.000032 ↗
15. Improving photovoltaic performance through radiative cooling in both terrestrial and extraterrestrial environments10.1364/OE.23.0A1120 ↗
16. Radiative cooling of solar absorbers using a visibly transparent photonic crystal thermal blackbody10.1073/pnas.1509453112 ↗
17. Performance analysis of passive cooling for photovoltaic modules and estimation of energy-saving potential10.1016/j.solener.2019.01.014 ↗
18. Safi · 2016
19. A comprehensive photonic approach for solar cell cooling10.1021/acsphotonics.7b00089 ↗
20. A review on photovoltaic/thermal hybrid solar technology10.1016/j.apenergy.2009.06.037 ↗
21. Hybrid PV/T solar systems for domestic hot water and electricity production10.1016/j.enconman.2006.01.012 ↗
22. Preliminary thermal analysis of a combined photovoltaic–photothermic–nocturnal radiative cooling system10.1016/j.energy.2017.03.075 ↗
23. Hybrid solar-assisted combined cooling, heating, and power systems: a review10.1016/j.rser.2020.110256 ↗
24. Photovoltaic–thermal collectors for night radiative cooling of buildings10.1016/j.solener.2011.03.015 ↗
25. Field investigation of a hybrid photovoltaic-photothermic-radiative cooling system10.1016/j.apenergy.2018.09.137 ↗
26. Performance assessment of a trifunctional system integrating solar PV, solar thermal, and radiative sky cooling
27. Performance analysis of enhanced radiative cooling of solar cells based on a commercial silicon photovoltaic module10.1016/j.solener.2018.10.043 ↗
28. An analytical study of the nocturnal radiative cooling potential of typical photovoltaic/thermal module
29. Is enhanced radiative cooling of solar cell modules worth pursuing?10.1016/j.solmat.2016.01.039 ↗
30. Review of photovoltaic module cooling methods and performance evaluation of the radiative cooling method10.1016/j.rser.2018.12.051 ↗
31. A simulation study for comparing the cooling performance of different daytime radiative cooling materials
32. Energy and exergy analysis of photovoltaic–thermal collector with and without glass cover10.1016/j.apenergy.2008.04.016 ↗
33. Bergman · 2011
34. Çengel · 2004
35. Comprehensive photonic approach for diurnal photovoltaic and nocturnal radiative cooling10.1016/j.solmat.2018.01.023 ↗
36. Feasibility research on a double-covered hybrid photo-thermal and radiative sky cooling module10.1016/j.solener.2020.01.022 ↗
37. [cited 2020 7th, June]; Available from:https://energyplus.net/weather.
38. John · 2013
39. Experimental study on a hybrid photo-thermal and radiative cooling collector using black acrylic paint as the panel coating10.1016/j.renene.2019.03.013 ↗
40. Development of an approach to compare the ‘value’ of electrical and thermal output from a domestic PV/thermal system10.1016/S0038-092X(03)00231-7 ↗
41. Energy, exergy and environmental analysis of glazed and unglazed PVT system integrated with phase change material: an experimental approach10.1016/j.solener.2020.02.096 ↗
42. Effect of atmospheric water vapor on radiative cooling performance of different surfaces10.1016/j.solener.2019.03.011 ↗