Transient photocurrent and photovoltage mapping for characterisation of defects in organic photovoltaics
Source abstract
Abstract
Abstract Advances in organic photovoltaics have created the opportunity for low-cost, high-throughput manufacture of solar cells using roll-to-roll printing technology; however, the performance, reliability, and production yield of these devices can be critically limited by the incorporation of defects during fabrication. The detection and elimination of all printing defects is unrealistic, so techniques are required to identify those types of defects which are most critical to solar cell functionality. Here, we combine mapping of both surface topography and photovoltaic properties in order to understand the impact of various types of defect on the functional performance. To enable this comparison, transient photocurrent and photovoltage mapping is demonstrated as a technique for measuring local variation in charge carrier dynamics. We find that dust particle contamination corresponds with localised reductions in charge extraction rate. This novel measurement technique provides a way to distinguish between different types of defect by considering both the magnitude and dynamics of the local transient responses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
2. Efficiency of bulk-heterojunction organic solar cells10.1016/j.progpolymsci.2013.05.001 ↗
3. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
4. Over 2 years of outdoor operational and storage stability of ITO-free, fully roll-to-roll fabricated polymer solar cell modules10.1002/ente.201500086 ↗
5. Development of lab-to-fab production equipment across several length scales for printed energy technologies including solar cells10.1002/ente.201402140 ↗
6. 2D characterization of OPV from single and tandem cells to fully roll-to-roll processed modules with and without electrical contact10.1002/adom.201400016 ↗
7. ISO 25178-604:2013: Geometrical product specifications (GPS) – Surface texture: Areal – Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments, International Organization for Standardization, Geneva, 2013
8. Spatial resolved photocurrent mapping of efficient organic solar cells fabricated on a woven mesh electrode10.1002/pip.1242 ↗
9. Two-dimensional photocurrent and transmission mapping of aqueous dye-sensitized solar cells10.1021/jp308238p ↗
10. An applied light-beam induced current study of dye-sensitised solar cells: photocurrent uniformity mapping and true photoactive area evaluation10.1063/1.4890935 ↗
11. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
12. The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells10.1063/1.2360780 ↗
13. Experimental determination of the rate law for charge carrier decay in a polythiophene: fullerene solar cell10.1063/1.2891871 ↗
14. Charge-density-based analysis of the current – voltage response of polythiophene/fullerene photovoltaic devices10.1073/pnas.1004363107 ↗
15. Probing charge recombination dynamics in organic photovoltaic devices under open-circuit conditions10.1002/aenm.201400356 ↗