Optical methodology for process monitoring of chalcopyrite photovoltaic technologies: Application to low cost Cu(In,Ga)(S,Se)2 electrodeposition based processes
Source abstract
Abstract
Non-destructive characterization of both single layers and completed devices are important issues for the development of efficient and low cost Cu(In,Ga)(S,Se)2 (CIGS) modules at high yields. This implies for the need of methodologies suitable for the assessment of optical, electrical, and physico-chemical parameters that are relevant for the final device efficiency and that can be used for quality control and process monitoring at different process steps. In these applications, detection of in-homogeneities in the different layers from large area modules is especially relevant, being the presence of these inhomogeneities responsible for the existing gap between the efficiencies achieved in these technologies at cell and module levels. In this context, this work reviews the different optical methodologies that have been developed in the framework of the SCALENANO European project for the advanced assessment of the different layers in high efficiency electrodeposited – based CIGS devices. This has includes different strategies as those based on Raman scattering, Photoluminescence/Electroluminescence (PL/EL) based techniques and new photoelectrochemical based tools and firstly Raman spectroscopy is very sensitive to both composition and crystal quality parameters that are determining for device efficiency. Use of resonant Raman excitation strategies allows achieving a high sensitivity of the Raman spectra to the analysed features in the different regions of the device. This involves selection of the suitable excitation wavelength (in the broad spectral region from UV to IR) for the resonant Raman excitation of the required layer in the device. The strong increase in the intensity of the Raman peaks related to the use of resonant excitation conditions allows also decreasing the measuring time to times compatible with the implementation of these techniques at online process monitoring level. Analysed parameters include the electrical conductivity of the Al-doped ZnO window layer, the thickness of the CdS buffer layer and the chemical composition (S/(S+Se) relative content) and presence of relevant secondary phases as Cu-poor ordered vacancy compounds in the surface region of the absorbers. In addition PL/EL imaging are powerful techniques that provide direct access to the optoelectronic properties of the materials and devices. Whereas EL is performed using complete devices by injecting current in analogy to the operation of a light emitting diode, PL allows the characterization of bare absorber materials without the need for any functional or contacting layers. Moreover, semiconductor photo-electrochemistry (PEC) is a versatile technique that enables many opto-electronic properties of semiconductors to be determined. Essentially, a semiconductor on a conducting substrate placed in a solution containing redox species forms a Schottky barrier junction. The formation of such a diode enables basic semiconductor properties to be measured such as doping type, doping density, band gap and the flat band position versus the vacuum energy scale. In all these cases, quality control indicators suitable for the advanced assessment of these processes have been identified and validated for the electrodeposition-based processes developed at Nexcis Company.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. Solarpro, MiaSolé Announces Second-Generation FLEX-02 Series Modules: Lighter, Thinner and with Higher Efficiencies, 2015. 〈https://solarprofessional.com/resources/press/miasole/miasol%C3%A9-announces-second-generation-flex-02-series-modules-lighter-thinner〉
3. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
4. Assessment of absorber composition and nanocrystalline phases in CuInS2 based photovoltaic technologies by ex-situ/in-situ resonant Raman scattering measurements10.1016/j.solmat.2010.11.014 ↗
5. Process monitoring of chalcopyrite photovoltaic technologies by Raman spectroscopy: an application to low cost electrodeposition based processes10.1039/C0NJ00794C ↗
6. Palm, J., et al., Pilot-line CIGSSe power module processing and qualification at shell solar, In: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibition, 2005.
7. Advanced diagnostic and control methods of processes and layers in CIGS solar cells and modules10.1002/pip.966 ↗
8. Quality control and characterization of Cu(In,Ga)Se2-based thin-film solar cells by surface photovoltage spectroscopy10.1016/S0927-0248(97)00205-5 ↗
9. Electrodeposition of CuInX (X=Se, Te) thin films10.1016/0379-6787(86)90087-6 ↗
10. Chalcopyrite thin film solar cells by electrodeposition10.1016/j.solener.2004.05.024 ↗
11. NEXCIS Achieves a New Record Performance @ 17.3% Certified Pixel Measurement with its CIGS PV Technology, 2014. 〈www.nexcis.fr〉
12. G. Brown, P. Stone, J. Woodruff, B. Cardozo, D. Jackrel, Device characteristics of a 17.1% efficient solar cell deposited by a non-vacuum printing method on flexible foil, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference, IEEE, 2012, pp. 003230–003233.10.1109/PVSC.2012.6318265 ↗
13. NEXCIS on Target for BIPV Markets, 2014. 〈http://www.nexcis.fr/fr/medias/theme-3-actualites/id-84-nexcis-on-target-for-bipv-markets〉
14. 2D device modelling and finite element simulations for thin-film solar cells10.1016/j.solmat.2008.11.058 ↗
15. Modeling of spatially inhomogeneous solar cells by a multi-diode approach10.1002/pssa.200521205 ↗
16. Cu deficiency in multi-stage co-evaporated Cu(In,Ga)Se2 for solar cells applications: microstructure and Ga in-depth alloying10.1016/j.actamat.2010.02.021 ↗
17. Investigation of compositional inhomogeneities in complex polycrystalline Cu(In,Ga)Se2 layers for solar cells10.1063/1.3280049 ↗
18. Advanced characterization of electrodeposition-based high efficiency solar cells: non-destructive Raman scattering quantitative assessment of the anion chemical composition in Cu(In,Ga)(S,Se)2 absorbers10.1016/j.solmat.2015.06.056 ↗
19. Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: influence of the sulfurization temperature on the crystalline properties of electrodeposited and sulfurized CuInSe2 precursors10.1063/1.2939833 ↗
20. Raman scattering and structural analysis of electrodeposited CuInSe2 and S-rich quaternary CuIn(S,Se)2 semiconductors for solar cells10.1002/pssa.200881239 ↗
21. Raman microprobe characterization of electrodeposited S-rich CuIn(S,Se)2 for photovoltaic applications: microstructural analysis10.1063/1.2734103 ↗
22. Raman scattering analysis of electrodeposited Cu(In,Ga)Se2 solar cells: impact of ordered vacancy compounds on cell efficiency10.1063/1.4890970 ↗
23. Key role of Cu–Se binary phases in electrodeposited CuInSe2 precursors on final distribution of Cu–S phases in CuIn(S,Se)2 absorbers10.1016/j.tsf.2008.10.144 ↗
24. Growth and characterization of conducting ZnO thin films by atomic layer deposition10.5012/bkcs.2010.31.9.2503 ↗
25. Photoluminescence of spray pyrolysis deposited ZnO nanorods10.1186/1556-276X-6-359 ↗
26. Non-destructive assessment of ZnO:Al window layers in advanced Cu(In,Ga)Se2 photovoltaic technologies
27. Size effects of Raman and photoluminescence spectra of CdS nanobelts10.1021/jp407272u ↗
28. Temperature dependence of Raman scattering in ZnO10.1103/PhysRevB.75.165202 ↗
29. Longitudinal optical phonon–plasmon coupled modes of degenerate Al-doped ZnO films10.1063/1.4737647 ↗
30. C.L. Jensen, D.E. Tarrant, J.H. Ermer, G.A. Pollock, The role of gallium in CuInSe2 solar cells fabricated by a two-stage method, in: Proceedings of the Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference – 1993, IEEE, 1993, pp. 577–580 (Cat. No.93CH3283-9).10.1109/PVSC.1993.347030 ↗
31. T. Dullweber, et al., Study of the Effect of Gallium Grading in Cu (In,Ga)Se2, vol. 362, 2000, pp. 478–481.10.1016/S0040-6090(99)00845-7 ↗
32. Impacts of surface sulfurization on Cu(In1−x,Gax)Se2 thin-film solar cells10.1002/pip.2554 ↗
33. Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
34. Influence of secondary phases during annealing on re-crystallization of CuInSe2 electrodeposited films10.1016/j.tsf.2009.01.043 ↗
35. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
36. Combined Raman scattering/photoluminescence analysis of Cu(In,Ga)Se2 electrodeposited layers10.1016/j.solener.2014.02.005 ↗
37. Electrochemical synthesis of CuIn(S,Se)2 alloys with graded composition for high efficiency solar cells10.1063/1.3080654 ↗
38. Impact of varied sulfur incorporation on the device performance of sequentially processed Cu(In,Ga)(Se,S)2 thin film solar cells10.1002/pssa.201228705 ↗
39. D. Tarrant, J. Ermer, I-III-VI2 multinary solar cells based on CuInSe2, in: Proceedings of the Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference – 1993, IEEE, 1993, pp. 372–378 (Cat. No.93CH3283-9).10.1109/PVSC.1993.347153 ↗
40. Why do we make Cu(In,Ga)Se2 solar cells non-stoichiometric?10.1016/j.solmat.2013.04.014 ↗
41. Cu deficiency in multi-stage co-evaporated Cu(In,Ga)Se2 for solar cells applications: microstructure and Ga in-depth alloying10.1016/j.actamat.2010.02.021 ↗
42. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
43. In-depth resolved Raman scattering analysis of secondary phases in Cu-poor CuInSe2 based thin films10.1063/1.3236770 ↗
44. C. Insignares-Cuello, et al., Non destructive assessment of advanced Cu(In,Ga)(S,Se)2 technologies for on-line proves monitoring: development of a multi-excitation wavelength Raman/Photoluminescence system, in: Proceedings of Photovoltaic Technical Conference PVTC 2015 (ed. France), 2015.
45. The chemical potential of radiation10.1088/0022-3719/15/18/012 ↗
46. Nonconventional (non-Silicon-based) photovoltaic materials10.1146/annurev-matsci-062910-100437 ↗
47. Correlations of Cu(In,Ga)Se2 imaging with device performance, defects, and microstructural properties10.1116/1.4714358 ↗
48. Quantitative luminescence mapping of Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2555 ↗
49. J.I. Pankove, Optical Processes in Semiconductors, 1971.10.1149/1.2404256 ↗
50. 2011
51. Radiative efficiency limits of solar cells with lateral band-gap fluctuations10.1063/1.1737071 ↗
52. Quasi-Fermi level splitting and sub-bandgap absorptivity from semiconductor photoluminescence10.1063/1.4898346 ↗
53. Deposition and characterization of copper chalcopyrite based solar cells using electrochemical techniques10.1149/1.2731222 ↗
54. J. Kessler, D. Schmid, R. Schaffler, H.W. Schock, S. Menezes, Electro-optical and photoelectrochemical studies of CuIn3Se5 chalcopyrite films, in: Proceedings of the Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference – 1993, IEEE, pp. 549–554 (Cat. No.93CH3283-9).10.1109/PVSC.1993.347035 ↗
55. Photoelectrochemical study of p-type copper indium diselenide thin films for photovoltaic applications10.1016/0165-1633(90)90018-V ↗
56. Formation of Cu3BiS3 thin films via sulfurization of Bi–Cu metal precursors10.1016/j.tsf.2012.04.003 ↗
57. Towards sustainable materials for solar energy conversion: preparation and photoelectrochemical characterization of Cu2ZnSnS410.1016/j.elecom.2008.02.008 ↗
58. 11.5% solar conversion efficiency in the photocathodically protected p-InP/V3+-V2+-HCI/C semiconductor liquid junction cell10.1063/1.92307 ↗
59. Chemical modification of n-GaAs electrodes with Os` gives a 15% efficient solar cell10.1038/326861a0 ↗
60. Efficient and Stable TiO2 :Pt-Cu(In,Ga)Se2 Composite Photoelectrodes for Visible Light Driven Hydrogen Evolution10.1002/aenm.201402148 ↗
61. Electrocatalytic Reduction of Carbon Dioxide using Sol-gel Processed Copper Indium Sulfide (CIS) Immobilized on ITO-Coated Glass Electrode10.1007/s12678-015-0257-y ↗
62. Prediction of photovoltaic p–n device short circuit current by photoelectrochemical analysis of p-type CIGSe films10.1016/j.elecom.2014.08.026 ↗
63. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
64. Degradation and passivation of CuInSe210.1063/1.4752165 ↗
65. S. Menezes, J.-F. Guillemoles, B. Canava, J. Vedel, D. Lincot, 1997. Modification of dead layer on surfaces of CuInSe2 and its alloys, in: Proceedings of the Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference – 1997, 1997, pp. 411–414.10.1109/PVSC.1997.654115 ↗
66. Quantification of surface ZnSe in Cu2ZnSnSe4-based solar cells by analysis of the spectral response10.1016/j.solmat.2014.01.015 ↗
67. HCl and Br2-MeOH etching of Cu2ZnSnSe4 polycrystalline absorbers10.1016/j.tsf.2012.12.095 ↗