journal article·2016-05

Reverse gravure coating for roll-to-roll production of organic photovoltaics

Doojin Vak, Hasitha Weerasinghe, Jyothi Ramamurthy, Jegadesan Subbiah, Michael Brown, David J. Jones

Publisher page

Abstract

Reverse gravure (RG) coating is reported here as an alternate film deposition method for potential large scale roll-to-roll production of organic photovoltaic devices (OPVs). The basic working principles of RG coating are shown and compared to the more well-known gravure printing. Gravure printing is similar to RG coating from a process point of view, but the films produced using each method are very different to each other. An optical thickness measurement system was developed and used to monitor film thickness variation of RG coated photo-active layers with various coating parameters in situ in the roll-to-roll process. Partially and fully printed OPV modules were fabricated using, primarily, the roll-to-roll RG coating process and devices showed 2.1% and 1.5% power conversion efficiencies, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 25th anniversary article: rise to power-OPV-based solar parks10.1002/adma.201302031 ↗
2. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
3. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
4. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
5. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
6. Large scale deployment of polymer solar cells on land, on sea and in the air10.1039/c3ee43212b ↗
7. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
8. Terthiophene-based D–A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells10.1021/jacs.5b08556 ↗
9. The state of organic solar cells—A meta analysis10.1016/j.solmat.2013.05.034 ↗
10. A. Pellegrino, From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective10.1039/c3ee43460e ↗
11. Matrix Organization and merit factor evaluation as a method to address the challenge of finding a polymer material for roll coated polymer solar cells10.1002/aenm.201402186 ↗
12. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
13. Large-area organic solar cells by accelerated blade coating10.1016/j.orgel.2015.03.001 ↗
14. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
15. A complete process for production of flexible large area polymer solar cells entirely using screen printing — First public demonstration10.1016/j.solmat.2008.12.001 ↗
16. Fully gravure printed organic photovoltaic modules: A straightforward process with a high potential for large scale production10.1016/j.solmat.2015.10.021 ↗
17. Organic photovoltaic modules fabricated by an industrial gravure printing proofer10.1016/j.solmat.2012.10.018 ↗
18. T.M. Eggenhuisen, Y. Galagan, A. Biezemans, M. Coenen, J. Gilot, P. Groen, R. Andriessen, Organic Photovoltaic Cells with All Inkjet Printed Layers and Freedom of Form, 2, 2014, pp. 2842–2845.10.1109/PVSC.2014.6925523 ↗
19. Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations10.1016/j.solmat.2014.06.017 ↗
20. Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
21. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
22. Low‐voltage organic transistors fabricated using reverse gravure coating on prepatterned substrates10.1002/adem.200800050 ↗
23. Roll-to-roll fabrication of bulk heterojunction plastic solar cells using the reverse gravure coating technique
24. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
25. Roll-to-roll gravure printing of organic photovoltaic modules — insulation of processing defects by an interfacial layer10.1002/pip.2508 ↗
26. Organic and inorganic blocking layers for solution-processed colloidal pbse nanocrystal infrared photodetectors10.1002/adfm.201001328 ↗
27. 3D Printer based slot-die coater as a lab-to-fab translation tool for solution-processed solar cells10.1002/aenm.201401539 ↗
28. Optically monitored spray coating system for the controlled deposition of the photoactive layer in organic solar cells10.1063/1.4906454 ↗
29. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
30. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
31. A parametric study of direct gravure coating10.1016/S0009-2509(03)00136-2 ↗
32. Tri-helical gravure roll coating10.1016/j.ces.2009.09.047 ↗
33. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
34. On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells10.1039/b823495g ↗
35. Printing Highly efficient organic solar cells10.1021/nl801365k ↗
36. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
37. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
38. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
39. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
40. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
41. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
42. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗