journal article·2014-09

The effect of polymer molecular weight on P3HT:PCBM nanoparticulate organic photovoltaic device performance

Natalie P. Holmes, Syahrul Ulum, Prakash Sista, Kerry B. Burke, Mitchell G. Wilson, Mihaela C. Stefan, Xiaojing Zhou, Paul C. Dastoor, Warwick J. Belcher

Publisher page

Abstract

Abstract Poly (3-hexylthiophene) (P3HT), at six molecular weights varying from 5 kDa to 72 kDa ( M w ), was used to prepare P3HT: phenyl C61 butyric acid methyl ester (PCBM) nanoparticulate organic photovoltaic (NP OPV) devices and the effect of this variation on device performance is reported. Power conversion efficiency (PCE) is observed to peak for the mid-range of molecular weights tested, this behaviour varies from the trend generally observed with bulk heterojunction (BHJ) devices, where high molecular weight polymers deliver the highest PCEs. Here we demonstrate that polymer molecular weight affects the electronic, morphological and compositional structure of the nanoparticulate film. Significantly, it is the domain composition that is most highly correlated with device performance and this composition is driven by the PCBM mobility and aggregation within the nanoparticulate structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Potential health effects of occupational chlorinated solvent exposure10.1196/annals.1371.050 ↗
2. Research recommendations for selected IARC-classified agents10.1289/ehp.0901828 ↗
3. Nanoparticles of conjugated polymers10.1021/cr100132y ↗
4. Improvement of the power conversion efficiency of organic photovoltaic cells with a P3HT layer fabricated by using a sonication process and having a vertically modulated nanoscale morphology10.1016/j.apsusc.2012.12.045 ↗
5. Correlation of polymeric compatibilizer structure to its impact on the morphology and function of P3HT:PCBM bulk heterojunctions10.1039/c3ta10386b ↗
6. Scanning transmission x-ray microscopy of polymer nanoparticles: probing morphology on sub-10nm length scales10.1088/0957-4484/22/26/265710 ↗
7. Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes10.1016/j.solmat.2013.06.003 ↗
8. P3HT:PCBM, Best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
9. Feron · Modelling transport in nanoparticle organic solar cells using Monte-Carlo methods Appl. Phys. Lett. · 2013 · 103 · 193306
10. A multilayered approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
11. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
12. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
13. The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devices10.1016/j.nanoen.2013.03.009 ↗
14. A simple method to prepare head-to-tail coupled, regioregular poly(3-alkylthiophenes) using grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
15. Regioregular, head-to-tail coupled poly(3-alkylthiophenes) made easy by the GRIM method: investigation of the reaction and the origin of regioselectivity10.1021/ma001677+ ↗
16. Experimental evidence for the quasi-living nature of the grignard metathesis method for the synthesis of regioregular poly(3-alkylthiophenes)10.1021/ma051122k ↗
17. Semiconducting polymer nanospheres in aqueous dispersion prepared by a miniemulsion process10.1002/1521-4095(20020503)14:9<651::AID-ADMA651>3.0.CO;2-V ↗
18. Interferometer-controlled scanning transmission X-ray microscopes at the advanced light source10.1107/S0909049502017739 ↗
19. Nano-scale quantitative chemical mapping of conjugated polymer blends10.1021/nl060583w ↗
20. Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells10.1021/cm047811c ↗
21. Using scanning probe microscopy to study the effect of molecular weight of poly(3-hexylthiophene) on the performance of poly(3-hexylthiophene):TiO2 nanorod photovoltaic devices10.1016/j.solmat.2008.10.006 ↗
22. Influence of molecular weight on the solar cell performance of double-crystalline donor-acceptor block copolymers10.1063/1.3257367 ↗
23. Impact of molecular weight on charge carrier dissociation in solar cells from a polyfluorene derivative10.1016/j.orgel.2009.07.002 ↗
24. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
25. Optimization of the bulk heterojunction composition for enhanced photovoltaic properties: correlation between the molecular weight of the semiconducting polymer and device performance10.1021/jp207669j ↗
26. Bulk-heterojunction organic photovoltaic cells fabricated using a high-viscosity solution of poly(3-hexylthiophene) with extremely high molecular weight10.1038/pj.2012.182 ↗
27. Planar heterojunction organic photovoltaic diodes via a novel stamp transfer process10.1088/0953-8984/20/47/475203 ↗
28. Fullerene contribution to photocurrent generation in organic photovoltaic cells
29. High molecular weights, polydispersities, and annealing temperatures in the optimization of bulk-heterojunction photovoltaic cells based on poly(3-hexylthiophene) or poly(3-butylthiophene)10.1002/adfm.200600005 ↗
30. Quantitative analysis of bulk heterojunction films using linear absorption spectroscopy and solar cell performance10.1002/adfm.201101583 ↗
31. Effect of molecular weight on spectroscopic and spectroelectrochemical properties of regioregular poly(3-hexylthiophene)10.1021/ma970627a ↗
32. Thermally stable bulk heterojunction solar cells based on cross-linkable acrylate-functionalized polythiophene diblock copolymers10.1021/ma3020905 ↗
33. Optical probes of chain packing structure and exciton dynamics in polythiophene films, composites, and nanostructures10.1002/polb.23105 ↗
34. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
35. Structural and photo-physical properties of spin-coated poly(3-hexylthiophene) thin films10.1016/j.matchemphys.2009.03.028 ↗
36. Determining exciton coherence from the photoluminescence spectral line shape in poly(3-hexylthiophene) thin films10.1063/1.3076079 ↗
37. Singlet exciton transfer and fullerene triplet formation in polymer-fullerene blend films10.1063/1.2338528 ↗
38. Vertical stratification and interfacial structure in p3ht:pcbm organic solar cells10.1021/jp104695j ↗
39. P3HT/PCBM Bulk heterojunction solar cells: impact of blend composition and 3d morphology on device performance10.1002/adfm.200902247 ↗
40. Evolution of structure, optoelectronic properties, and device performance of polythiophene:fullerene solar cells during thermal annealing10.1002/adfm.201002300 ↗
41. Dynamic Monte Carlo modeling of exciton dissociation in organic donor-acceptor solar cells10.1063/1.4731698 ↗
42. Exciton diffusion in organic photovoltaic cells10.1039/C3EE42444H ↗
43. Synthesis and spectroscopic properties of a series of beta-blocked long oligothiophenes up to the 96-mer: revaluation of effective conjugation length10.1021/ja034333i ↗
44. Spectra and electrical properties of soluble partially alkyl-substituted oligomers of thiophene up to 11 rings10.1016/0379-6779(91)91110-V ↗
45. Charge photogeneration in neat conjugated polymers10.1021/cm4027144 ↗