journal article·2019-12

Magnetron sputtered Sb2Se3-based thin films towards high performance quasi-homojunction thin film solar cells

Shuo Chen, Zhuanghao Zheng, Michel Cathelinaud, Hongli Ma, Xvsheng Qiao, Zhenghua Su, Ping Fan, Guangxing Liang, Xianping Fan, Xianghua Zhang

Publisher page

Abstract

Abstract Sb2Se3 is a promising candidate for environment-friendly and cost-efficiently thin film photovoltaics thanks to its material advantages and superior optoelectronic properties. However, it has intrinsically low electrical conductivity, which leads to unsatisfactory device performance and limited scope of applications. Herein, we demonstrated an effective strategy of electrical conductivity-induced Sb2Se3-based photovoltaic performance improvement. Three Sb2Se3-based targets with chemical composition of Sb2Se3, Sb2Se3.3 and Sb2(Se0.9I0.1)3 have been firstly prepared by using high-temperature melting technique. Then the high-quality thin films can be obtained through an effective Radio Frequency (RF) magnetron sputtering process. A novel Sb2Se3 quasi-homojunction thin film solar cell was fabricated for the first time and the highest power conversion efficiency reaches already a highly interesting 2.65%. The combined features of unique quasi-homojunction device structure and advantageous full-vacuum preparation process further demonstrated its attractive potential for thin film photovoltaic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
2. Synergistic effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency10.1002/aenm.201802540 ↗
3. CdTe solar cells with open-circuit voltage breaking the 1 V barrier10.1038/nenergy.2016.15 ↗
4. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
5. A simple aqueous precursor solution processing of earth-abundant Cu2SnS3 absorbers for thin-film solar cells10.1021/acsami.6b02167 ↗
6. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
7. Enhanced spectral response of CIGS solar cells with anti-reflective subwavelength structures and quantum dots10.1016/j.solmat.2019.01.044 ↗
8. Air-stable solar cells with 0.7 V open-circuit voltage using selenized antimony sulfide absorbers prepared by hydrazine-free solution method
9. 6.5% certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
10. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
11. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
12. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
13. Efficiency improvement of Sb2Se3 solar cells via grain boundary inversion10.1021/acsenergylett.8b01456 ↗
14. Facile synthesis of hybrid nanorods with the Sb2Se3/AgSbSe2 heterojunction structure for high performance photodetectors10.1039/C5NR06384A ↗
15. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
16. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
17. Enhanced Sb2Se3 solar cell performance through theory-guided defect control10.1002/pip.2900 ↗
18. Crystal growth direction-controlled antimony selenide thin film absorbers produced using an electrochemical approach and intermediate thermal treatment10.1016/j.solmat.2017.07.004 ↗
19. Solution-Processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
20. Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells10.1016/j.solmat.2018.09.020 ↗
21. Improvement in Sb2Se3 solar cell efficiency through band Alignment engineering at the buffer/absorber interface10.1021/acsami.8b17611 ↗
22. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
23. Thermally induced structural evolution and performance of Sb2Se3 films and nanorods prepared by an easy sputtering method10.1016/j.solmat.2017.09.008 ↗
24. Facile preparation and enhanced photoelectrical performance of Sb2Se3 nano-rods by magnetron sputtering deposition10.1016/j.solmat.2016.10.042 ↗
25. Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se3
26. Chalcogenide glass-ceramic with self-organized heterojunctions: application to photovoltaic solar cells10.1051/epjpv/2018002 ↗
27. Enhancement of charge photo-generation and transport via an internal network of Sb2Se3/Cu2GeSe3 heterojunctions10.1039/C4TA03491K ↗
28. Effect of Nb doping on preferential orientation, phase transformation behavior and electrical properties of PbZrO3 thin films10.1016/j.jallcom.2012.06.116 ↗
29. Cu(In,Ga)Se2 thin film solar cells with a combined ALD-Zn(O,S) buffer and MOCVD-ZnO:B window layers10.1016/j.solmat.2013.05.052 ↗
30. Growth of wafer-scale standing layers of WS2 for self-biased high-speed UV-Visible-NIR optoelectronic devices10.1021/acsami.7b16397 ↗
31. Origins of band-gap renormalization in degenerately doped semiconductors10.1103/PhysRevB.78.075211 ↗
32. Optical band gap and the Burstein-Moss effect in iodine doped PbTe using diffuse reflectance infrared Fourier transform spectroscopy10.1088/1367-2630/15/7/075020 ↗
33. Enhanced electrical conductivity and photoconductive properties of Sn-doped Sb2Se3 crystals10.1039/C8TC01683F ↗
34. GeSe thin-film solar cells fabricated by self-regulated rapid thermal sublimation10.1021/jacs.6b11705 ↗