Two-dimensional finite difference-based model for coupled irradiation and heat transfer in photovoltaic modules
Source abstract
Abstract
Abstract Simulation of a complete PV system shall stem from a Multiphysics perspective. Within a continuum modeling approach, among these physics, the thermal model of a PV panel is most crucial because all the other models are directly or indirectly related to it. As all models of a PV system are connected sequentially, error from one model component propagates to the next model component and the overall system error accumulates eventually. One of the main objectives of this work was to increase the prediction accuracy by developing a fully transient 2-D finite difference (FD) based thermal model. The developed computational code is completely generic and can be applied to any type of PV technology or configuration. It was shown in the study how to choose an appropriate grid size for any FD model. Using the developed code, various studies were also conducted. Modified radiation models, heat transfer coefficients and thermal networks for the PV panel were proposed in the study, which remarkably improved the accuracy of the thermal model. Also studied were the effects of including heat transfer from the sides of a PV panel and heat generation in the front glass cover. The results showed that ignoring the heat transfer from the sides of a PV panel and including heat generation in the front glass cover have no noticeable difference in the model prediction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Boyle · 1997
2. Effect of shading on series and parallel connected solar PV modules10.5539/mas.v3n10p32 ↗
3. Fraunhofer Institute for Solar Energy Systems ISE, Photovoltaics Report, 2016. 〈https://www.ise.fraunhofer.de/en/downloads-englisch/pdf-files-englisch/photovoltaics-report-slides.pdf〉.
4. Finite element thermal analysis of a solar photovoltaic module10.1016/j.egypro.2012.02.050 ↗
5. On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
6. A thermal model for photovoltaic systems10.1016/S0038-092X(00)00149-3 ↗
7. G.M. Tina, S. Scrofani, Electrical and Thermal Model for PV Module Temperature Evaluation Electrical and Thermal Model for PV Module Temperature Evaluation, http://dx.doi.org/10.1109/MELCON.2008.4618498.10.1109/MELCON.2008.4618498 ↗
8. Dynamic coupled thermal-and-electrical modelling of sheet-and-tube hybrid photovoltaic/thermal (PVT) collectors
9. A thermal model for photovoltaic panels under varying atmospheric conditions10.1016/j.applthermaleng.2010.03.012 ↗
10. D.L. King, J.A. Kratochvil, W.E. Boyson, Photovoltaic Array Performance Model, United States, Department of Energy, Sandia National Laboratories, 2004. 〈http://prod.sandia.gov/techlib/access-control.cgi/2004/043535.pdf〉.10.2172/919131 ↗
11. Modelling of a double-glass photovoltaic module using finite differences10.1016/j.applthermaleng.2005.02.008 ↗
12. M. Mattei, G. Notton, C. Cristofari, M. Muselli, P. Poggi, Calculation of the Polycrystalline PV Module Temperature Using a Simple Method of Energy Balance, 31, 2006, pp. 553–567. http://dx.doi.org/10.1016/j.renene.2005.03.010.10.1016/j.renene.2005.03.010 ↗
13. A computational analysis of coupled thermal and electrical behavior of PV panels10.1016/j.solmat.2015.09.004 ↗
14. Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: description and experimental validation10.1016/j.renene.2014.01.043 ↗
15. The thermal and electrical yield of a PV-thermal collector10.1016/S0038-092X(01)00094-9 ↗
16. Thermal modelling of a photovoltaic module under variable free convection conditions10.1016/j.applthermaleng.2011.09.016 ↗
17. G. Acciani, O. Falcone, S. Vergura, P. Bari, V.E. Orabona, Analysis of the Thermal Heating of poly-Si and a-Si Photovoltaic Cell by Means of FEM Key Words, 1, 2010, pp. 1240–1244.10.24084/repqj08.633 ↗
18. Three-dimensional thermal modeling of a photovoltaic module under varying conditions10.1016/j.solener.2012.05.034 ↗
19. Performance analysis of photovoltaic-thermal collector by explicit dynamic model10.1016/j.solener.2003.07.001 ↗
20. Complete PV model considering its thermal dynamics10.1080/02533839.2012.747044 ↗
21. Operating temperature of photovoltaic modules: a survey of pertinent correlations10.1016/j.renene.2008.04.009 ↗
22. G.M. Tina, A. Gagliano, An improved multi-layer thermal model for photovoltaic modules, in: Proceedings of the Comput. Energy Sci. (SpliTech), Int. Multidiscip. Conf., IEEE, 2016, pp. 1–6.10.1109/SpliTech.2016.7555927 ↗
23. Thermal stress and strain of solar cells in photovoltaic modules
24. Thermal model for an early prototype of concentrating photovoltaic for active solar panel initiative system10.1063/1.3683513 ↗
25. Gehrlicher Solar Company, Gehrlicher Solar. 〈http://www.gehrlicher.com/en/〉. (Accessed 1 March 2017).
26. R. and A.-C.E. American Society of Heating, Methods of Testing to Determine the Thermal Performance of Solar Collectors, ASHRAE, 1978. 〈https://books.google.com.qa/books?id=ybIPAAAAMAAJ〉.
27. Duffie · 2013
28. Optical efficiency of a PV–thermal hybrid CPC module for high latitudes10.1016/S0038-092X(01)00066-4 ↗
29. Improvement and validation of a model for photovoltaic array performance10.1016/j.solener.2005.06.010 ↗
30. Bergman · 2011
31. Simulation study of a solar collector with a selectively coated polymeric double walled absorber plate10.1016/S0196-8904(01)00066-8 ↗
32. Dynge · 2013
33. A survey of wind convection coefficient correlations for building envelope energy systems' modeling10.1016/j.applthermaleng.2007.12.005 ↗
34. Holman · 1977
35. J.H. Watmuff, W.W.S. Charters, D. Proctor, Solar and wind induced external coefficients: solar collectors, Coopération Méditerranéenne Pour L’énergie Sol. 1, 1977, p. 56.
36. Full-scale measurements of wind-induced convective heat transfer from a roof-mounted flat plate solar collector10.1016/S0038-092X(97)00119-9 ↗
37. The convective heat exchange at the external surface of buildings10.1016/0360-1323(77)90021-X ↗
38. Effect of finite width on heat transfer and fluid flow about an inclined rectangular plate10.1115/1.3450946 ↗
39. Natural convection adjacent to horizontal surface of various platforms10.1115/1.3450224 ↗
40. Long-wave radiation from clear skies10.1002/qj.49708938105 ↗
41. Electrical, thermal and structural performance of a cooled PV module: transient analysis using a multiphysics model10.1016/j.apenergy.2013.06.030 ↗