journal article·2016-12

Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications

Z. Ding, V. Stoichkov, M. Horie, E. Brousseau, J. Kettle

Publisher page

Abstract

The application of spray coated silver nanowires (AgNWs) onto OPVs for building Integrated Photovoltaics (BIPVs) is demonstrated. By using AgNWs with PEDOT:PSS, a transparent conductive layer was demonstrated on top of an P3HT:PCBM active layer with a sheet resistance of 30 Ω/⎕ for 90% transparency. This has been applied to two separate configurations; semi-transparent OPVs for solar glazing applications and OPVs onto an opaque substrate, namely steel. For the latter, a novel technique to planarise the steel substrate with an intermediate layer is also presented, with a substantial decrease in surface roughness reported to ensure that the substrate is smooth enough to use for OPV fabrication. The use of SU-8 as an intermediate layer reduced the surface roughness to RA=10 nm, which is one of the lowest values reported to date, and was achieved on a low cost substrate (DC01 low carbon steel) using solution processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Building integrated photovoltaic products: a state-of-the-art review and future research opportunities10.1016/j.solmat.2011.12.016 ↗
2. Organic photovoltaics: polymer power10.1038/nphoton.2009.130 ↗
3. Whole systems appraisal of a UK Building Integrated Photovoltaic (BIPV) system: energy, environmental, and economic evaluations10.1016/j.enpol.2011.09.048 ↗
4. Organic photovoltaics: potential fate and effects in the environment10.1016/j.envint.2012.08.015 ↗
5. Design rules for donors in bulk-heterojunction solar cells—Towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
6. Semitransparent OPV modules pass environmental chamber test requirements10.1016/j.solmat.2012.09.031 ↗
7. Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications10.1039/c2ee22623e ↗
8. Large area ITO-free organic solar cells on steel substrate10.1016/j.orgel.2012.09.039 ↗
9. Selection of metal substrates for completely solution-processed inverted organic photovoltaic devices10.1016/j.solmat.2013.02.010 ↗
10. Cd-free flexible Cu (In, Ga)Se2 thin film solar cells with ZnS (O, OH) buffer layers on Ti foils10.1143/APEX.2.072201 ↗
11. Solar photovoltaic technology on rough low carbon steel substrates for building integrated photovoltaics: A complete fabrication sequence10.1016/j.solener.2015.11.035 ↗
12. CIGS thin-film solar cells on steel substrates10.1016/j.tsf.2008.11.016 ↗
13. Doped graphene electrodes for organic solar cells10.1088/0957-4484/21/50/505204 ↗
14. Ultrathin transparent Au electrodes for organic photovoltaics fabricated using a mixed mono-molecular nucleation layer10.1002/adfm.201002021 ↗
15. Solution-processed flexible polymer solar cells with silver nanowire electrodes10.1021/am2009585 ↗
16. Rapid synthesis of ultra-long silver nanowires for tailor-made transparent conductive electrodes: proof of concept in organic solar cells10.1088/0957-4484/26/26/265201 ↗
17. Roll-to‐Roll printed silver nanowire semitransparent electrodes for fully ambient solution-processed tandem polymer solar cells10.1002/adfm.201501887 ↗
18. Insights on the working principles of flexible and efficient ITO-free organic solar cells based on solution processed Ag nanowire electrodes10.1016/j.solmat.2012.03.009 ↗
19. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
20. Correlation of morphology and charge transport in poly (3, 4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films
21. The critical choice of PEDOT:PSS additives for long term stability of roll-to‐roll processed OPVs.10.1002/aenm.201401912 ↗
22. Effect of hole transporting layers on the performance of PCPDTBT:PCBM organic solar cells10.1088/0022-3727/45/12/125102 ↗
23. ITO-free inverted polymer/fullerene solar cells: Interface effects and comparison of different semi-transparent front contacts10.1016/j.solmat.2011.09.044 ↗
24. PEDOT-properties and applications10.1134/S1811238214010068 ↗
25. Real-time investigation of crystallization and phase-segregation dynamics in P3HT: PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗