journal article·2016-02

Fabrication and characterization of low cost Cu 2 O/ZnO:Al solar cells for sustainable photovoltaics with earth abundant materials

Mahmoud Abdelfatah, Johannes Ledig, Abdelhamid El-Shaer, Alexander Wagner, Vicente Marin-Borras, Azat Sharafeev, Peter Lemmens, Mohsen Mohamed Mosaad, Andreas Waag, Andrey Bakin

Publisher page

Abstract

Abstract The low cost electrodeposition method was used to grow Cu2O thin films and experimentally determine the optimal absorber layer thickness. Raman scattering studies indicate the presence of solely crystalline Cu2O and SEM images show that the thin films consist of grains with a pyramidal shape. The influence of the thickness of the light absorbing Cu2O layer on the basic characteristic of the heterojunction and their properties have been investigated using reflectivity, current–voltage (J–V), capacitance–voltage (C–V) and the external quantum efficiency (EQE) measurements. The depletion layer, the charge collection length of the minority carrier, and reflectivity are the main factors describing the device properties. The efficiency of 1.09% with an open circuit voltage of Voc=0.35 V, a short circuit current density Jsc=6.21 mA cm−2 and a filling factor of FF=50% was obtained as the highest value for our solar cells. A Gaussian fit shows that the film thickness of around 3 µm is an optimum with respect to a high efficiency of the solar cells. C–V measurements shows that the estimated value of the built-in potential is Vb=0.35 V and the acceptor concentration at the junction is NA=4.375×1016 cm−3 for solar cell with the highest efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. G. Kavlak, J. McNerney, R.L. Jaffe, J.E. Trancik, Growth in metals production for rapid photovoltaics deployment, in: Proceedings of the 40th IEEE Photovoltaic Specialist Conference (PVSC), IEEE, 2014, pp. 1442–1447.10.1109/PVSC.2014.6925187 ↗
2. Ultrathin amorphous zinc-tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells10.1039/c3ee24461j ↗
3. Binary copper oxide semiconductors: from materials towards devices10.1002/pssb.201248128 ↗
4. Explanation for low‐efficiency Cu2O Schottky‐barrier solar cells10.1063/1.90593 ↗
5. Thin film deposition of Cu2O and application for solar cells10.1016/j.solener.2005.10.012 ↗
6. Heteroepitaxial growth of Cu2O thin film on ZnO by metal organic chemical vapor deposition10.1016/j.jcrysgro.2009.07.020 ↗
7. Characterization of Cu2O thin film grown by molecular beam epitaxy10.4028/www.scientific.net/KEM.582.157 ↗
8. Reactive magnetron sputtering of Cu2O: dependence on oxygen pressure and interface formation with indium tin oxide10.1063/1.3592981 ↗
9. Properties of reactively-sputtered copper oxide thin films10.1016/0040-6090(79)90504-2 ↗
10. Thin-film deposition of Cu2O by reactive radio-frequency magnetron sputtering10.1143/JJAP.39.L786 ↗
11. Vapour phase epitaxy Cu2O a‐plane Al2O310.1002/pssc.201200951 ↗
12. Oxides for sustainable photovoltaics with earth-abundant materials, Proc. SPIE 8987
13. Effect of inserting a thin buffer layer on the efficiency in n-ZnO/p-Cu2O heterojunction solar cells10.1116/1.3698596 ↗
14. P-channel oxide thin film transistors using solution-processed copper oxide10.1021/am302251s ↗
15. Novel atmospheric growth technique to improve both light absorption and charge collection in ZnO/Cu2O thin film solar cells10.1002/adfm.201203243 ↗
16. Copper oxide films grown by atomic layer deposition from Bis (tri-n-butylphosphane) copper (I) acetylacetonate on Ta, TaN, Ru, and SiO210.1149/1.3110842 ↗
17. Cu2O: electrodeposition and characterization10.1021/cm991054e ↗
18. Galvanostatic deposition and electrical characterization of cuprous oxide thin films10.1016/0040-6090(92)90015-4 ↗
19. Potentiostatic deposition and characterization of cuprous oxide thin films10.1155/2013/271545 ↗
20. Electrodeposited ZnO/Cu2O heterojunction solar cells10.1016/j.electacta.2007.09.030 ↗
21. A novel buffering technique for aqueous processing of zinc oxide nanostructures and interfaces, and corresponding improvement of electrodeposited ZnO–Cu2O photovoltaics10.1002/adfm.201001956 ↗
22. Oxide pn heterojunction of Cu2O/ZnO nanowires and their photovoltaic performance10.1155/2013/421371 ↗
23. Zinc oxide nanorod based photonic devices: recent progress in growth, light emitting diodes and lasers10.1088/0957-4484/20/33/332001 ↗
24. Thin-film ZnO/Cu2O solar cells incorporating an organic buffer layer10.1016/j.solmat.2011.09.043 ↗
25. Fabrication of ZnO/Cu2O heterojunctions in atmospheric conditions: improved interface quality and solar cell performance10.1016/j.solmat.2014.09.018 ↗
26. Effect of ZnO film deposition methods on the photovoltaic properties of ZnO–Cu2O heterojunction devices10.1016/j.tsf.2005.07.167 ↗
27. Effect of the thin Ga2O3 layer in n+-ZnO/n-Ga2O3/p-Cu2O heterojunction solar cells10.1016/j.tsf.2013.06.038 ↗
28. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium–oxide thin film and p-type sodium-doped Cu2O sheet10.7567/APEX.8.022301 ↗
29. Fabrication and characterization of ZnO/Cu2O solar cells prepared by electrodeposition10.7567/APEX.6.086503 ↗
30. Atomic layer deposited gallium oxide buffer layer enables 1.2V open‐circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
31. Potentiostatic electrodeposition of cuprous oxide thin films for photovoltaic applications10.1016/j.electacta.2011.02.075 ↗
32. Growth and characterization of p-Cu2O/n-ZnO nanorod heterojunctions prepared by a two-step potentiostatic method10.1016/j.jallcom.2013.04.039 ↗
33. Strong efficiency improvements in ultra‐low‐cost inorganic nanowire solar cells10.1002/adma.201001455 ↗
34. Effect of junction morphology on the performance of polycrystalline Cu2O homojunction solar cells10.1021/jz100991e ↗
35. Incompatible length scales in nanostructured Cu2O solar cells10.1002/adfm.201102263 ↗
36. Photoluminescence and Raman spectra of ZnO thin films by charged liquid cluster beam technique10.1002/1521-396X(200209)193:1<125::AID-PSSA125>3.0.CO;2-X ↗
37. H. Solache-Carranco, G. Juarez-Diaz, M. Galván-Arellano, J. Martínez-Juárez, G. Romero-Paredes, R. Peña-Sierra, Raman scattering and photoluminescence studies on Cu2O, in: Proceedings of the 5th International Conference on Electrical Engineering, Computing Science and Automatic Control CCE 2008, IEEE, 2008, pp. 421–424.10.1109/ICEEE.2008.4723375 ↗
38. Fabrication of coral-like Cu2O nanoelectrode for solar hydrogen generation10.1016/j.jpowsour.2013.05.107 ↗
39. Surfactant assisted synthesis of copper oxide (CuO) leaf-like nanostructures for electrochemical applications
40. Effect of electrodeposition and annealing of ZnO on optical and photovoltaic properties of the p-Cu2O/n-ZnO solar cells10.1016/j.electacta.2011.07.017 ↗
41. Improved Cu2O‐based solar cells using atomic layer deposition to control the cu oxidation state at the p–n junction10.1002/aenm.201301916 ↗
42. Perspective: maintaining surface-phase purity is key to efficient open air fabricated cuprous oxide solar cells10.1063/1.4913442 ↗
43. Minority carrier transport length of electrodeposited Cu2O in ZnO/Cu2O heterojunction solar cells
44. Analysis of the forward and reverse bias IV and CV characteristics on Al/PVA: n-PbSe polymer nanocomposites Schottky diode10.1063/1.3698773 ↗
45. Fabrication and photovoltaic characteristics of Cu2O/TiO2 thin film heterojunction solar cell10.1016/j.tsf.2012.08.013 ↗