Three-dimensional metallo-dielectric selective thermal emitters with high-temperature stability for thermophotovoltaic applications
Source abstract
Abstract
Selective thermal emitters concentrate most of their spontaneous emission in a spectral band much narrower than a blackbody. When used in a thermophovoltaic energy conversion system, they become key elements defining both its overall system efficiency and output power. Selective emitters' radiation spectra must be designed to match their accompanying photocell's band gap and simultaneously, withstand high temperatures (above 1000 K) for long operation times. The advent of nanophotonics has allowed the engineering of very selective emitters and absorbers; however, thermal stability remains a challenge since nanostructures become unstable at temperatures much below the melting point of the used materials. In this paper we explore a hybrid 3D dielectric-metallic structure that combines the higher thermal stability of a monocrystalline 3D silicon scaffold with the optical properties of a thin platinum film conformally deposited on top. We show experimentally that these structures exhibit a selective emission spectrum suitable for TPV applications and that they are thermally stable at temperatures up to 1100 K. These structures are ideal in combination with HI-V semiconductors in the range E-g=0.4-0.55 eV such as InGaAsSb (E-g=0.5-0.6 eV) and InAsSbP (E-g=0.3-0.55 eV). (C) 2014 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Quantum Electrodynamics and Casimir Effect · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Fundamentals of Thermophotovoltaic Energy Conversion
2. Coherent emission of lifght by thermal sources10.1038/416061a ↗
3. Three-dimensional photonic-crystal emitter for thermal photovoltaic power generation10.1063/1.1592614 ↗
4. High-temperature resistive surface grating for spectral control of thermal radiation10.1063/1.1560867 ↗
5. Enabling high-temperature nanophotonics for energy applications10.1073/pnas.1120149109 ↗
6. Three-dimensional self-assembled photonic crystals with high temperature stability for thermal emission modification10.1038/ncomms3630 ↗
7. Inhibited spontaneous emission in solid-state physics and electronics10.1103/PhysRevLett.58.2059 ↗
8. Thermal emission control with one-dimensional metallodielectric photonic crystal10.1103/PhysRevB.70.125101 ↗
9. Two-dimensional tungsten photonic crystals as selective thermal emitters10.1063/1.2927484 ↗
10. Large-area fabrication of high aspect ratio tantalum photonic crystals for high-temperature selective emitters10.1116/1.4771901 ↗
11. Metallic photonic crystal absorber–emitter for efficient spectral control in high-temperature solar thermophotovoltaics10.1002/aenm.201400334 ↗
12. Theory of thermal grooving10.1063/1.1722742 ↗
13. Flattening a nearly plane solid surface due to capillarity10.1063/1.1734979 ↗
14. Solid-state dewetting of thin films10.1146/annurev-matsci-070511-155048 ↗
15. Low-bandgap Ge and InAsSbP/InAs-based TPV cells10.1063/1.1539393 ↗
16. Antimony-based III–V thermophotovoltaic materials and devices10.1063/1.1841902 ↗
17. Quaternary InGaAsSb thermophotovoltaic diodes10.1109/TED.2006.885087 ↗
18. Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics10.1073/pnas.1301004110 ↗
19. A nanophotonic solar thermophotovoltaic device10.1038/nnano.2013.286 ↗
20. The physics of macropore formation in low doped n-type silicon10.1149/1.2220919 ↗
21. Three-dimensional photonic crystals based on macroporous silicon with modulated pore diameter10.1063/1.1351533 ↗
22. Large-area three-dimensional structuring by electrochemical etching and lithography10.1002/adma.200400436 ↗
23. Micro-structure transformation of silicon: a newly developed transformation technology for patterning silicon surfaces using the surface migration of silicon atoms by hydrogen annealing10.1143/JJAP.39.5033 ↗
24. Empty-space-in-silicon technique for fabricating a silicon-on-nothing structure10.1063/1.1324987 ↗
25. Study of pore reorganization during annealing of macroporous silicon structures for solar cell application10.1016/j.tsf.2007.12.041 ↗
26. Infrared thermal emission in macroporous silicon three-dimensional photonic crystals10.1063/1.2804002 ↗
27. Improving selective thermal emission of three-dimensional macroporous silicon through porosity tuning10.1063/1.2976144 ↗
28. Thermal emission of macroporous silicon chirped photonic crystals10.1364/OL.35.003348 ↗
29. Directional reflectance and emissivity of an opaque surface10.1364/AO.4.000767 ↗
30. Field theory for generalized bidirectional reflectivity: derivation of Helmholtz׳s reciprocity principle and Kirchhoff׳s law10.1364/JOSAA.15.002735 ↗
31. Radiometric calibration of IR Fourier transform spectrometers: solution to a problem with the high-resolution interferometer sounder10.1364/AO.27.003210 ↗
32. Accurate measurements of thermal radiation from a tungsten photonic lattice10.1063/1.1941460 ↗
33. Mimicking surface plasmons with structured surfaces10.1126/science.1098999 ↗
34. Detailed balance analysis of solar thermophotovoltaic systems made up of single junction photovoltaic cells and broadband thermal emitters10.1016/j.solmat.2010.06.042 ↗