Polyviologen derivatives as an interfacial layer in polymer solar cells
Source abstract
Abstract
Abstract To apply as an interfacial layer for solution processible polymer solar cells (PSCs) based on poly(3-hexylthiophene): [6,6]-phenyl-C 61 -butyric acid methyl ester (P3HT:PCBM), novel poly(1,1′-dibutyl-4,4′-bipyridinium dibromide) (PV4), poly(1,1′-didodecyl-4,4′-bipyridinium dibromide) (PV12), and poly(1,1′-triethylenedioxy-4,4′-bipyridinium di-p-toluenesulfonate) (PV-OTs) are synthesized. These polyviologen (PV) derivatives have different alkyl chain length and counter anion. From the ultraviolet spectroscopy (UPS) study, the reduction of the work function of Al are observed by the formation of interface dipole, which is induced by the thin film of PV derivatives. The power conversion efficiency (PCE) of conventional type PSC based on PV4 and PV12 with a structure of ITO/PEDOT:PSS/P3HT:PCBM/PV layer/Al are 2.22 and 2.71%, respectively. In particular, the PCE of PSC with PV-OTs reaches 3.30%. The J sc and V oc are—9.51 mA/cm 2 and 0.60 V, which are dramatically improved than those of the devices based on PV4 and PV12. This is due to different contact property between active layer and Al, which is controlled by the alkyl chain length and counter anion of PV derivatives. The series resistance ( R s ) of the device with PV-OTs is 3.05 (ohm cm 2 ), which is smaller than that of the device without PV and with PV4 and PV12. The performances of PSC with PV derivatives as a interfacial layer are strongly related with both contact property and formation of interface dipole. The work function of ITO is also reduced by the thin layer of PV derivatives. Inverted type PSCs with a structure of ITO/PV layer/P3HT:PCBM/WO 3 /Ag show typical rectification and pretty good photovoltaic property, while the device without PV layer shows very weak photovoltaic property and does not show diode characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Polymer photovoltaic cells. Enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
7. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
8. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja808373p ↗
9. Synthesis of a low band gap polymer and its application in highly efficient polymer solar sells10.1021/ja9064975 ↗
10. Development of new semiconducting polymers for high performance solar cells10.1021/ja901545q ↗
11. M.Y. Jo, S.J. Park, T. Park, Y.S. Won, J.H. Kim, Relationship between HOMO energy level and open circuit voltage of polymer solar cells, Organic Electronics, 10.1016/j.orgel.2012.06.015, in press.
12. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
13. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
14. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
15. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
16. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
17. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
18. Efficient polymer solar cells fabricated by simple brush painting10.1002/adma.200702040 ↗
19. Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells10.1016/j.solmat.2008.11.052 ↗
20. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
21. Stability of the interface between indium-tin-oxide and poly (3, 4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
22. Blocking reactions between indium–tin oxide and poly (3,4-ethylene dioxythiophene): poly (styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
23. Indium blocking in polymer light emitting diodes with a crosslinked poly (3,4-ethylenedioxythiophene)/silane hole transport layer10.1016/j.synthmet.2006.02.012 ↗
24. Electrical degradation of triarylamine-based light-emitting polymer diodes monitored by micro-Raman spectroscopy10.1016/j.cplett.2003.12.124 ↗
25. Synthesis and characterization of photo-cross-linkable hole-conducting polymers10.1021/ma048365h ↗
26. Novel photo-cross-linkable hole-transporting polymers: synthesis, characterization, and application in organic light emitting diodes10.1021/ma060844o ↗
27. Triarylamine-containing poly(perfluorocyclobutane) as hole-transporting material for polymer light-emitting diodes10.1021/ma0002038 ↗
28. Thermally cross-linkable hole-transporting materials for improving hole injection in multilayer blue-emitting phosphorescent polymer light-emitting diodes10.1021/ma801374w ↗
29. Hole injection/transport materials derived from Heck and sol–gel chemistry for application in solution-processed organic electronic devices10.1021/ja1061517 ↗
30. Marks p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
31. Effect of LiF/Metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
32. On interface dipole layers between C60 and Ag or Au10.1007/s003390201311 ↗
33. Metal work-function changes induced by organic adsorbates: a combined experimental and theoretical study10.1103/PhysRevLett.95.046804 ↗
34. Enhancing the photovoltage of polymer solar cells by using a modified cathode10.1002/adma.200602597 ↗
35. Combination of titanium oxide and a conjugated polyelectrolyte for high-performance inverted-type organic optoelectronic devices10.1002/adma.201100266 ↗
36. Water‐soluble polyfluorenes as an interfacial layer leading to cathode‐independent high performance of organic solar cells10.1002/adfm.200902386 ↗
37. Water/methanol-soluble conjugated copolymer as an electron-transport layer in polymer light-emitting diodes10.1002/adma.200400963 ↗
38. Electron‐rich alcohol‐soluble neutral conjugated polymers as highly efficient electron‐injecting materials for polymer light‐emitting diodes10.1002/adfm.200801898 ↗
39. New Architecture for high‐efficiency polymer photovoltaic cells using solution‐based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
40. Ultrathin TiO2 Films on ZnO electron-collecting layers of inverted organic solar cell10.1021/jp2063589 ↗
41. Transparent anodes for polymer photovoltaics: Oxygen permeability of PEDOT10.1016/j.solmat.2006.11.006 ↗
42. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
43. Encapsulation-free hybrid organic-inorganic light-emitting diodes10.1063/1.2374812 ↗
44. High efficiency composite metal oxide‐polymer electroluminescent devices: a morphological and material based investigation10.1002/adma.200800202 ↗
45. Five color electrochromicity using prussian blue and nafion/methyl viologen layered films10.1149/1.2085647 ↗
46. An electrochemical glucose sensor from an organically modified nanocomposite of viologen and TiO210.1166/jnn.2010.2948 ↗
47. Electrochromic polymers covalently anchored to electrode surfaces. Optical and electrochemical properties of a viologen‐based polymer10.1149/1.2119888 ↗
48. Electron transport materials for organic light-emitting diodes10.1021/cm049473l ↗
49. Electron-transporting materials for organic electroluminescent and electrophosphorescent devices10.1039/b413249c ↗
50. Electronic properties at gold/conjugated‐polyelectrolyte interfaces10.1002/adma.200802420 ↗
51. Work function measurements on indium tin oxide films10.1016/S0368-2048(01)00310-3 ↗
52. A photoelectron spectroscopy study on the indium tin oxide treatment by acids and bases10.1063/1.123397 ↗
53. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
54. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗