journal article·2019-09Open access

Evaluation of indoor photovoltaic power production under directional and diffuse lighting conditions

Clément Antoine Reynaud, Raphael Clerc, Pierre Balthazar Lechêne, Mathieu Hébert, Anthony Cazier, Ana Claudia Arias

Abstract

Abstract This work proposes a detailed method to estimate the amount of power produced by photovoltaic energy harvesting in realistic indoor conditions, not only featuring artificial light sources and low levels of irradiance (0.1–1 mW/cm 2 ) but also oblique directional and diffuse lighting. The method is based on a model of performance of a commercial silicon and an organic solar cells under diffuse and oblique light and on simulations of indoor light in a rectangular room of various dimensions. It is found that the solar cells absorb diffuse light almost as efficiently as if it were direct normal light. Diffuse light accounts for 30% to more than 70% of the total illuminance in the indoor configurations investigated. Indoor, the angle of incidence at the point of maximum illuminance on a wall depends solely on the directivity of the source and is usually comprised within 30 o -60°, representing 15%–50% of power loss compared to normal incidence. The organic cell can achieve a power generation of up to 27 μW/cm 2 under 600 lux in a 4 m 2 room, and at least 7 μW/cm 2 under a typical indoor illuminance of 200 lux. The performance of the organic cell is found superior to the commercial silicon cell used in this study (7 μW/cm 2 under 600 lux), even if the power conversion efficiency of the silicon cell under one sun (12.7%) is higher than the one of the organic cell (5.4%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Impact of Light on Environment and Health · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Sundmaeker · 2010
2. Review of energy harvesting techniques and applications for microelectronics
3. Indoor solar energy harvesting for sensor network router nodes10.1016/j.micpro.2007.02.006 ↗
4. Green · 1982
5. A proposal for typical artificial light sources for the characterization of indoor photovoltaic applications10.3390/en7031500 ↗
6. Organic photovoltaic cell relying on energy transfer with over 20% efficiency in indoor lighting
7. Characterization of photovoltaic modules for low-power indoor application10.1016/j.apenergy.2012.07.001 ↗
8. Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting10.1016/j.apenergy.2015.07.031 ↗
9. Maximum efficiencies of indoor photovoltaic devices10.1109/JPHOTOV.2012.2225023 ↗
10. Low light illumination study on commercially available homojunction photovoltaic cells10.1016/j.apenergy.2017.01.029 ↗
11. Is organic photovoltaics promising for indoor applications?10.1063/1.4954268 ↗
12. Photovoltaic performance of Organic Photovoltaics for indoor energy harvester10.1016/j.orgel.2017.05.023 ↗
13. Organic photovoltaic cells – promising indoor light harvesters for self-sustainable electronics
14. Indoor light recycling: a new home for organic photovoltaics10.1039/C6TC03344J ↗
15. Organic solar cells and fully printed super-capacitors optimized for indoor light energy harvesting10.1016/j.nanoen.2016.06.017 ↗
16. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
17. Bulk‐heterojunction organic solar cells: five core technologies for their commercialization”10.1002/adma.201601197 ↗
18. The impact of angular dependent loss measurement on PV module energy yield prediction
19. The angular response of ultrathin film organic solar cells10.1063/1.2949745 ↗
20. Effect of incidence angle and polarization on the optimized layer structure of organic solar cells10.1016/j.solmat.2013.07.040 ↗
21. Integrated optoelectronic model for organic solar cells based on the finite element method including the effect of oblique sunlight incidence and a non-ohmic electrode contact10.7567/JJAP.55.102301 ↗
22. Wrinkles and deep folds as photonic structures in photovoltaics10.1038/nphoton.2012.70 ↗
23. Geometric light trapping with a V-trap for efficient organic solar cells
24. “Efficiency enhancement in Si solar cells by textured photonic crystal back reflector10.1063/1.2349845 ↗
25. Plasmonic nanoparticle enhanced light absorption in GaAs solar cells10.1063/1.2988288 ↗
26. Macleod · 2001
27. Simonot · 2015
28. Methods for the determination of the optical constants of thin films from single transmission measurements: a critical review10.1088/0022-3727/36/15/316 ↗
29. Self-consistent optical parameters of intrinsic silicon at 300K including temperature coefficients10.1016/j.solmat.2008.06.009 ↗
30. Meyzonnette · 2001
31. DIALux
32. State of the art in lighting simulation for building science: a literature review10.1080/19401493.2011.558211 ↗