journal article·2018-09

Polymer surface modification to optimize inverted organic photovoltaic devices under indoor light conditions

Ji Soo Goo, Sang-Chul Shin, Young-Jun You, Jae Won Shim

Publisher page

Abstract

Abstract The objective of this study is to determine the photovoltaic properties of inverted organic photovoltaic devices (OPVs) that employ indium–tin oxide (ITO) modified by ethoxylated polyethylenimine (PEIE) as an electron-collecting electrode under indoor lighting conditions. Owing to the reduced current generation at low light intensity, possessing a sufficiently large shunt resistance (RP) associated with a low leakage current is of utmost importance for performance maximization. The photovoltaic properties under this lighting condition were optimized by controlling the thickness of the PEIE layers, and the electrical, optical, and surface properties of the PEIE-modified ITO were determined. Inverted OPVs based on poly(3-hexylthiophene)–indene-C60 bisadduct (P3HT–ICBA) with an 8.5-nm-thick PEIE layer yielded a maximum power-conversion efficiency (PCE) of 13.9% under an LED light with a luminance of 500 lx. Meanwhile, the same device showed poor performance with a PCE of 3.1% under 1 sun illumination owing to the insulating nature of PEIE.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Organic solar cells and fully printed super-capacitors optimized for indoor light energy harvesting10.1016/j.nanoen.2016.06.017 ↗
2. Photovoltaic performance of organic photovoltaics for indoor energy harvester10.1016/j.orgel.2017.05.023 ↗
3. Low light illumination study on commercially available homojunction photovoltaic cells10.1016/j.apenergy.2017.01.029 ↗
4. Dye-sensitized solar cells for efficient power generation under ambient lighting10.1038/nphoton.2017.60 ↗
5. Indoor light recycling: a new home for organic photovoltaics10.1039/C6TC03344J ↗
6. Cost-competitiveness of organic photovoltaics for electricity self-consumption at residential buildings: a comparative study of Denmark and Greece under real market conditions10.1016/j.apenergy.2017.10.003 ↗
7. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
8. Organic photovoltaics10.1039/b812502n ↗
9. Efficient recyclable organic solar cells on cellulose nanocrystal substrates with a conducting polymer top electrode deposited by film-transfer lamination10.1016/j.orgel.2013.12.018 ↗
10. The effect of post-processing treatments on inflection points in current-voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
11. Toward high-performance polymer photovoltaic devices for low-power indoor applications10.1002/solr.201700174 ↗
12. Intensity-dependent equivalent circuit parameters of organic solar cells based on pentacene and C-6010.1063/1.1895473 ↗
13. Critical interfaces in organic solar cells and their influence on the open-circuit voltage10.1021/ar900139v ↗
14. All-plastic solar cells with a high photovoltaic dynamic range10.1039/c3ta15073a ↗
15. A universal method to produce low–work function electrodes for organic electronics10.1126/science.1218829 ↗
16. Studies of the optimization of recombination layers for inverted tandem polymer solar cells10.1016/j.solmat.2012.08.004 ↗
17. Inverted tandem polymer solar cells with polyethylenimine-modified MoOX/Al2O3:ZnO nanolaminate as the charge recombination layers10.1002/aenm.201400048 ↗
18. Polyvinylpyrrolidone-modified indium tin oxide as an electron-collecting electrode for inverted polymer solar cells10.1063/1.4745772 ↗
19. Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene): poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
20. Electronic structure of the poly(3-hexylthiophene): indene-C-60 bisadduct bulk heterojunction10.1063/1.3626938 ↗
21. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
22. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
23. Tattoo-like transferable hole selective electrodes for highly efficient, solution-processed organic indoor photovoltaics
24. Is organic photovoltaics promising for indoor applications?10.1063/1.4954268 ↗