TiO2 as intermediate buffer layer in Cu(In,Ga)Se2 solar cells
Source abstract
Abstract
The application of TiO2 as part of the buffer layer stack in thin film Cu(In,Ga)Se2 (CIGS) solar cells is investigated for the improvement of the photovoltaic device performance. In a standard device configuration a CdS/ZnO/Al:ZnO layer stack is applied onto the CIGS absorber layer. By decreasing the CdS buffer layer thickness a higher photocurrent is expected from a reduced parasitic absorption. When the CdS layer is not fully covering the CIGS surface, losses in VOC and FF are observed in I-V measurements due to the arising unfavorable CIGS/ZnO band alignment and sputter damage on the CIGS surface. Here we present thin TiO2 layers deposited by atomic layer deposition at low temperature as alternative to the unintentionally doped ZnO. With this approach, the photocurrent can be increased without adversely affecting VOC. Comparable device efficiency is achieved for the investigated structure and the reference process with the gain in current density being compensated by increased series resistance. Temperature dependent I-V measurements coupled with 1D-SCAPS simulations suggest a positive conduction band offset at the CdS/TiO2 interface limiting the FF. ALD-TiO2 is suggested as a more suitable intermediate buffer layer than sputtered ZnO when thin CdS buffer layers are applied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se-2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elements in Cu(In,Ga)Se-2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)(2) based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
4. Improved photocurrent in Cu(In, Ga)Se-2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
5. Inline Cu(In,Ga)Se-2 Co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
6. Optimization of buffer-window layer system for CIGS thin film devices with indium sulphide buffer by in-line evaporation10.1016/j.solmat.2015.09.038 ↗
7. Growth and characterization of ZnO-based buffer layers for CIGS solar cells10.1117/12.846351 ↗
8. Electron-selective TiO2 contact for Cu(In,Ga)Se-2 solar cells10.1038/srep16028 ↗
9. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se-2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
10. High quality baseline for high efficiency, Cu(In1-x,Ga-x)Se-2 solar cells10.1002/pip.757 ↗
11. On the beneficial effect of Al2O3 front contact passivation in Cu(In,Ga) Se-2 solar cells10.1016/j.solmat.2016.09.019 ↗
12. Interface study of CuInSe2/ZnO and Cu(In,Ga)Se-2/ZnO devices using ALD ZnO buffer layers10.1016/S0040-6090(03)00229-3 ↗
13. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
14. Sputtered ZnO-based buffer layer for band offset control in Cu(In,Ga)Se-2 solar cells10.1016/j.tsf.2010.12.117 ↗
15. Comparison of cell performance of ZnS(O,OH)/CIGS solar cells with UV-assisted MOCVD-ZnO:B and sputter-deposited ZnO:Al window layers10.1109/JPHOTOV.2013.2249556 ↗
16. Buffer-less Cu(In,Ga)Se-2 solar cells by band offset control using novel transparent electrode10.1016/j.cap.2012.06.019 ↗
17. Locating the electrical junctions in Cu(In,Ga)Se-2 and Cu2ZnSnSe4 solar cells by scanning capacitance spectroscopy10.1002/pip.2805 ↗
18. Electronic properties of ZnO/CdS/Cu(In,Ga)Se-2 solar cells aspects of heterojunction formation10.1016/S0040-6090(00)01737-5 ↗
19. Fabrication of wide-gap Cu(ln(1-x)Ga(x))Se-2 thin film solar cells: a study on the correlation of cell performance with highly resistive i-ZnO layer thickness10.1016/j.solmat.2004.08.017 ↗
20. Highly efficient Cu(In,Ga)Se-2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
21. Characteristics of TiOx films prepared by chemical vapor deposition using tetrakis-dimethyl-amido-titanium and water10.1016/j.tsf.2005.07.121 ↗
22. Growth kinetics and crystallization behavior of TiO(2) films prepared by plasma enhanced atomic layer deposition10.1149/1.2955724 ↗
23. Atomic layer deposition of TiO2 from tetrakis(dimethylamino) titanium and H2O10.1016/j.tsf.2013.07.076 ↗
24. Scheer · 2011
25. Y. Inoue, M. Hála, A. Steigert, R. Klenk, S. Siebentritt, Optimization of buffer layer/i-layer band alignment, in: Proceedings of the 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), 2015, pp. 1–5.10.1109/PVSC.2015.7355902 ↗
26. Conduction-band-offset rule governing J-V distortion in CdS/CI(G)S solar cells
27. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
28. Injection current barrier formation for RbF post deposition treated Cu(In,Ga)Se2 based solar cells
29. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
30. Influence of Ni and Cr impurities on the electronic properties of Cu(In,Ga)Se-2 thin film solar cells10.1002/pip.2503 ↗
31. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures10.1016/0927-0248(95)00107-7 ↗
32. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
33. A comprehensive review of ZnO materials and devices10.1063/1.1992666 ↗
34. Electrical and optical-properties of Tio2 anatase thin-films10.1063/1.356306 ↗
35. Surface passivation for reliable measurement of bulk electronic properties of heterojunction devices10.1002/smll.201601575 ↗