Enhancing the efficiency of Sb2S3 solar cells using dual-functional potassium doping
Source abstract
Abstract
Abstract Antimony sulphide (Sb2S3) thin films have attracted considerable research interest as a photovoltaic absorber material owing to their suitable band gap, large absorption coefficient, and excellent photoelectronic properties. In this study, cadmium sulphide (CdS) films were doped with potassium, which increased their crystallinity and optical transmission. These films were then used as a buffer layer to increase the efficiency of Sb2S3 solar cells. Furthermore, the potassium diffused into the Sb2S3 film, which increased their crystallinity and light absorption and decreased its surface roughness. Dual-functional potassium doping helped improve all of the photoelectric parameters of the Sb2S3 solar cells. Specifically, the device efficiency increased from 4.57% to 6.53% (an increase of 42.89%), and a high current density of 15.29 mA cm−2 was achieved. These findings are expected to facilitate the further development of Sb2S3 thin-film solar cells for industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Trilaminar ZnO/ZnS/Sb2S3 nanotube arrays for efficient inorganic–organic hybrid solar cells
2. CuInS2/Sb2S3 heterostructure modified with noble metal co-catalyst for efficient photoelectrochemical water splitting10.1016/j.jallcom.2019.04.312 ↗
3. Novel WO3/Sb2S3 heterojunction photocatalyst based on WO3 of different morphologies for enhanced efficiency in photoelectrochemical water splitting10.1021/acsami.6b00429 ↗
4. Benzene-thermal synthesis and characterization of ultrafine powders of antimony sulfide10.1016/S0025-5408(98)00106-8 ↗
5. Simple colloidal synthesis of single-crystal Sb−Se−S nanotubes with composition dependent band-gap energy in the near-infrared10.1021/nl9002816 ↗
6. Optical properties of amorphous and crystalline Sb2S3 thin fifilms10.1016/0040-6090(79)90347-X ↗
7. Biomolecule-Assisted synthesis of ribbon-like Sb2S3 nanostructure10.4028/www.scientific.net/AMR.97-101.2144 ↗
8. Growth of Sb2E3 (E= S, Se) polygonal tubular crystals via a novel solvent-relief-self-seeding process10.1021/ic0107072 ↗
9. Detailed balance limit of the effificiency of tandem solar cells10.1088/0022-3727/13/5/018 ↗
10. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
11. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
12. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy10.1002/adfm.201304238 ↗
13. Doping effects in Sb2S3 absorber for full-inorganic printed solar cells with 5.7% conversion efficiency10.1016/j.ijhydene.2013.02.069 ↗
14. Ti doped Sb2S3 thin film for improved performance of inorganic-organic hybrid solar cells
15. n-Type doping of Sb2S3 light-harvesting films enabling high-efficiency planar heterojunction solar cells10.1021/acsami.8b08965 ↗
16. Structural, morphological and optical properties of Na and K dual doped CdS thin film [J]10.1016/j.jallcom.2012.08.010 ↗
17. Comparative studies of CdS, CdS:Al, CdS:Na and CdS:(Al–Na) thin films prepared by spray pyrolysis10.1016/j.spmi.2015.09.021 ↗
18. Effect of low concentration Sn doping on optical properties of CdS films grown by CBD technique10.3390/ijms12096320 ↗
19. Effect of Cu doping on CdS as a multifunctional nanomaterial: structural, morphological, optical and electrical properties
20. Revealing the role of potassium treatment in CZTSSe thin film solar cells10.1021/acs.chemmater.7b00418 ↗
21. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
22. Carrier lifetime and charge separation in K+-Doped CZTS nanocrystals10.1021/acsaem.8b01168 ↗
23. Enhancement in the optical and electrical properties of CdS thin films through Ga and K co-doping10.1016/j.mssp.2016.12.016 ↗
24. Enhancement of Sb2Se3 thin-film solar cell photoelectric properties by addition of interlayer CeO210.1016/j.solener.2019.05.028 ↗
25. Guo · Solar RRL · 2019 · 3
26. Significant increase in efficiency and limited toxicity of a solar cell based on Sb2Se3 with SnO2 as a buffer layer10.1039/C9TC04169A ↗
27. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film10.1016/j.nanoen.2019.103929 ↗
28. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
29. Promising Sb2(S,Se)3 solar cells with high open voltage by application of a TiO2/CdS double buffer layer
30. A single-source approach to Bi2S3 and Sb2S3 nanorods via a hydrothermal treatment10.1021/cg0341813 ↗
31. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
32. Microstructure analysis of chemically synthesized wurtzite-type CdS nanocrystals10.1007/s12043-015-1132-3 ↗
33. Properties of CdS films deposited by the electron beam evaporation technique[J]10.1016/j.jallcom.2010.04.227 ↗
34. Efficient Sb2S3-sensitized solar cells via single-step deposition of Sb2S3 using S/Sb-Ratio-Controlled SbCl3-thiourea complex solution10.1002/adfm.201500296 ↗
35. Synthesis and enhanced electrochemical catalytic performance of monolayer with a tunable band gap10.1002/adma.201500368 ↗
36. High resolution XPS study of the large-band-gap semiconductor stibnite (Sb2S3): structural contributions and surface reconstruction10.1016/j.susc.2005.10.034 ↗
37. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors10.1002/pip.886 ↗
38. Physical investigations on Sb2S3 sprayed thin film for optoelectronic applications10.1016/j.mssp.2014.05.059 ↗
39. ZnO/TiO2/Sb2S3 core–shell nanowire heterostructure for extremely thin absorber solar cells10.1021/acs.jpcc.7b00178 ↗
40. Insights into the role of the interface defects density and the bandgap of the back surface field for efficient p-type silicon heterojunction solar cells10.1039/C7RA04018K ↗
41. Nanoscale microstructure and chemistry of Cu2ZnSnS4/CdS interface in kesterite Cu2ZnSnS4 solar cells10.1002/aenm.201600706 ↗
42. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
43. Sb2S3/Spiro-OMeTAD inorganic-organic hybrid p-n junction diode for high performance self-powered photodetector10.1021/acsami.6b09943 ↗
44. A chemical precursor for depositing Sb2S3 onto mesoporous TiO2 layers in nonaqueous media and its application to solar cells10.1039/c2dt31348k ↗
45. Ma · 2019 · 275
46. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
47. Effect of mesoporous TiO2 layer thickness on the cell performance of perovskite solar cells
48. Efficiency enhancement of inverted structure perovskite solar cells via oleamide doping of PCBM electron transport layer10.1021/acsami.5b03525 ↗
49. Vacuum assisted solution processing for highly efficient Sb2S3 solar cells10.1039/C8TA05614E ↗
50. Structural, optical, electrical and positron annihilation studies of CdS:Fe system10.1016/j.jallcom.2007.01.016 ↗
51. Stability of metal halide perovskite solar cells10.1002/aenm.201500963 ↗