Performance enhancement of mesoscopic perovskite solar cells with GQDs-doped TiO2 electron transport layer
Source abstract
Abstract
Abstract Electron transport layer (ETL) of perovskite solar cells (PSCs) plays an important role on transferring electrons from perovskite layer to transparent conductive oxide layer, strongly affecting PSC performance. In the present study, effects of adding graphene quantum dots (GQDs) as a dopant to the mesoscopic TiO2 (mp-TiO2) ETL on performance of a PSC were investigated. Different amounts (1.25, 2.5 and 5 vol%) of GQDs were directly added to the TiO2 precursor solution which was subsequently applied as the doped ETL by spin coating. The results showed that Jsc, Voc and FF of the 2.5 vol% GQDs-doped cell were 21.92 mA/cm2, 0.97 V and 0.63, respectively, corresponding to a PCE of 14.36% (champion cell), approximately 50% improvement compared to the un-doped cells (best PCE 9.55%). The perovskite film in the GQDs-doped cell was dense with fewer pinholes which facilitated electron extraction, and accelerated charge mobility in TiO2 layer, consequently promoting Jsc and Voc. Based on EIS results, GQDs doping into the TiO2 ETL significantly suppressed the recombination processes, resulting in a higher FF. Interestingly, the PSC based on 2.5 vol% GQDs-doped TiO2 ETL maintained ~88% of its initial PCE (champion cell), after 500 h under ambient conditions; whereas, the conventional PSC based on pure TiO2 ETL maintained only 61% of its initial PCE under the same conditions, suggesting a dramatic improvement in the device stability. The findings clearly showed that GQDs doping to TiO2 ETL could be a potential and confident approach for improving performance and stability of the mesoscopic PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Perovskite solar cells10.46537/scibru.v16i1.53 ↗
2. Recent developments of graphene-TiO2 composite nanomaterials as efficient photoelectrodes in dye-sensitized solar cells: a review10.1016/j.rser.2017.09.024 ↗
3. An introduction to solar cell technology10.5937/jaes14-10879 ↗
4. Perovskite solar cells: a brief introduction and some remarks
5. Towards stable and commercially available perovskite solar cells10.1038/nenergy.2016.152 ↗
6. Organo-metal perovskite based solar cells: sensitized versus planar architecture10.1039/C4RA03981E ↗
7. Stenberg · 2017
8. Iodide management in formamidinium lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
9. Quantifying energy losses in planar perovskite solar cells10.1016/j.solmat.2017.09.002 ↗
10. Perovskite solar cells: materials, configurations and stability10.1016/j.rser.2017.09.011 ↗
11. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide10.1039/C6EE02390H ↗
12. Titanate hollow nanospheres as electron-transport layer in mesoscopic perovskite solar cell with enhanced performance10.1039/C8TC06218H ↗
13. Brookite TiO2 as a low-temperature solution-processed mesoporous layer for hybrid perovskite solar cells10.1039/C5TA06177F ↗
14. Enhanced performance for planar perovskite solar cells with samarium-doped TiO2 compact electron transport layers10.1021/acs.jpcc.7b05880 ↗
15. Improved photovoltaic performance of triple-cation mixed-halide perovskite solar cells with binary trivalent metals incorporated into the titanium dioxide electron transport layer10.1039/C9TC00555B ↗
16. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
17. Low temperature Nb-doped SnO2 electron-selective contact yields over 20% efficiency in planar perovskite solar cells10.1021/acsenergylett.8b00055 ↗
18. Achieving high-performance planar perovskite solar cell with Nb-doped TiO2 compact layer by enhanced electron injection and efficient charge extraction10.1039/C6TA00989A ↗
19. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
20. Enhanced performance and photostability of perovskite solar cells by introduction of fluorescent carbon dots10.1021/acsami.7b02242 ↗
21. High-performance, stable and low-cost mesoscopic perovskite (CH3NH3PbI3) solar cells based on poly(3-hexylthiophene)-modified carbon nanotube cathodes10.1007/s12200-016-0566-7 ↗
22. Fullerene-based materials for photovoltaic applications: toward efficient, hysteresis-free, and stable perovskite solar cells10.1002/aelm.201700435 ↗
23. Application of carbon nanotubes in perovskite solar cells: a review10.1063/1.5010632 ↗
24. Enhanced photocurrent density of HTM-free perovskite solar cells by carbon quantum dots10.1016/j.apsusc.2017.05.122 ↗
25. Enhanced performance of planar perovskite solar cell by graphene quantum dot modification10.1021/acssuschemeng.8b00938 ↗
26. Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots10.1021/ja4132246 ↗
27. Carbon quantum dots/TiOx electron transport layer boosts efficiency of planar heterojunction perovskite solar cells to 19%10.1021/acs.nanolett.6b05177 ↗
28. Graphene quantum dots decorated TiO2 mesoporous film as an efficient electron transport layer for high-performance perovskite solar cells10.1016/j.jpowsour.2018.09.056 ↗
29. Size effects of a graphene quantum dot modified-blocking TiO2 layer for efficient planar perovskite solar cells10.1039/C7TA02242E ↗
30. Graphene quantum dot incorporated perovskite films: passivating grain boundaries and facilitating electron extraction10.1039/C6CP06953C ↗
31. Efficient and highly light stable planar perovskite solar cells with graphene quantum dots doped PCBM electron transport layer10.1016/j.nanoen.2017.08.008 ↗
32. Plant leaf-derived graphene quantum dots and applications for white LEDs10.1039/C4NJ01185F ↗
33. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
34. A fast deposition crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
35. Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI310.1063/1.4891275 ↗
36. Mg-doped TiO2 boosts the efficiency of planar perovskite solar cells to exceed 19%10.1039/C6TA06879K ↗
37. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
38. The impressive effect of eco-friendly carbon dots on improving the performance of dye-sensitized solar cells10.1016/j.solener.2019.02.072 ↗
39. Raman spectroscopy: a new approach to measure the percentage of anatase TiO2 exposed (001) facets10.1021/jp301256h ↗
40. Preparation of fluorescent graphene quantum dots from humic acid for bioimaging application10.1039/C5NJ00760G ↗
41. Morphology control of the perovskite films for efficient solar cells10.1039/C4DT03869J ↗
42. Enhanced efficiency of dye-sensitized solar cell by using a novel modified photoanode with platinum C3N4 nanotubes incorporated Ag/TiO2 nanoparticles10.1016/j.electacta.2017.07.069 ↗
43. Photovoltaic performance improvement of dye-sensitized solar cells through introducing In-doped TiO2 film at conducting glass and mesoporous TiO2 interface as an efficient compact layer10.1016/j.electacta.2014.02.110 ↗
44. Influence of the porosity of the TiO2 film on the performance of the perovskite solar cell
45. Surface engineering of perovskite films for efficient solar cells
46. Designing an efficient graphene quantum dot-filled luminescent down shifting layer to improve the stability and efficiency of perovskite solar cells by simple optical modeling10.1039/C8RA06196C ↗
47. Impact of rubidium and cesium cations on the moisture stability of multiple-cation mixed-halide perovskites10.1021/acsenergylett.7b00731 ↗
48. Enhancing the performance of hole-conductor free carbon-based perovskite solar cells through rutile-phase passivation of anatase TiO2 scaffold10.1016/j.jpowsour.2019.03.039 ↗
49. Effects of energetics with {001} facet-dominant anatase TiO2 scaffold on electron transport in CH3NH3PbI3 perovskite solar cells10.1016/j.electacta.2019.01.102 ↗
50. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
51. Stability issues on perovskite solar cells10.3390/photonics2041139 ↗
52. Recent advances in improving the stability of perovskite solar cells10.1002/aenm.201501420 ↗
53. Improving the long-term stability of perovskite solar cells with a porous Al2O3 buffer layer10.1021/jz502703p ↗
54. Effects of surface blocking layer of Sb2S3 on nanocrystalline TiO2 for CH3NH3PbI3 perovskite solar cells10.1021/jp500449z ↗
55. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
56. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
57. Improved photovoltaic performance of perovskite solar cells by utilizing down-conversion NaYF4:Eu3+ nanophosphors10.1039/C8TC05864D ↗