journal article·2019-10

Highly efficient and stable planar CsPbI2Br perovskite solar cell with a new sensitive-dopant-free hole transport layer obtained via an effective surface passivation

Shaomin Yang, Huan Zhao, Min Wu, Shihao Yuan, Yu Han, Zhike Liu, Kunpeng Guo, Shengzhong (Frank) Liu, S. Yang, H. Zhao, S. Yuan, Y. Han, Z. Liu, S. Liu, M. Wu, K. Guo

Publisher page

Abstract

Abstract Hole transport layers (HTLs) plays critical role in CsPbI2Br perovskite solar cells (PSCs). However, few studies have been done to develop new and sensitive-dopant-free HTL for CsPbI2Br PSCs. Here, a low-cost fluorinated N',N',N'',N''-tetrakis(4-methoxyphenyl)spiro[fluorene-9,9'-xanthene]-2,7-diamine (2mF-X59) was synthesized and applied as sensitive-dopant-free HTL into CsPbI2Br PSCs. After modified the 2mF-X59 and CsPbI2Br surface by 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquino-dimethane (F4-TCNQ), a maximum power conversion efficiency (PCE) of 14.42% was obtained for CsPbI2Br PSC with an impressive open-circuit voltage (Voc) of 1.23 V, which is higher than that of the most previously reported CsPbI2Br PSCs with the doped Spiro-OMeTAD. More importantly, the CsPbI2Br PSCs with the newly developed HTLs showed remarkable stability retaining more than 94% of their initial PCE value after aging in air for 30 days without encapsulation. Therefore, we firmly believe that our new 2mF-X59 HTL created via molecular engineering is a promising candidate for preparing high performance CsPbI2Br PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Precursor engineering for all-inorganic CsPbI2Br perovskite solar cells with 14.78% efficiency10.1002/adfm.201803269 ↗
2. Precise control of crystal growth for highly efficient CsPbI2Br perovskite solar cells10.1016/j.joule.2018.10.011 ↗
3. Bifunctional stabilization of all-inorganic α-CsPbI3 perovskite for 17% efficiency photovoltaics10.1021/jacs.8b07927 ↗
4. Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro(TFSI)2 in perovskite and dye-sensitized solar cells10.1021/ja504539w ↗
5. Enhanced charge mobility in a molecular hole transporter via addition of redox inactive ionic dopant: implication to dye-sensitized solar cells10.1063/1.2424552 ↗
6. High-mobility hydrophobic conjugated polymer as effective interlayer for air-stable efficient perovskite10.1002/solr.201800232 ↗
7. Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells10.1039/C6EE00709K ↗
8. Carbazole-based hole-transport materials for efficient solid-state dye-sensitized solar cells and perovskite solar cells10.1002/adma.201402415 ↗
9. One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer10.1039/C8TA07332E ↗
10. A low-cost spiro[fluorene-9,9′-xanthene]-based hole transport material for highly efficient solid-state dye-sensitized solar cells and perovskite solar cells10.1039/C6EE00056H ↗
11. Facile synthesized organic hole transporting material for perovskite solar cell with efficiency of 19.8%10.1016/j.nanoen.2016.03.020 ↗
12. Tailor-making low-cost spiro[fluorene-9,9′-xanthene]- based 3D oligomers for perovskite solar cells10.1016/j.chempr.2017.03.011 ↗
13. 4-Tert-butylpyridine free organic hole transporting materials for stable and efficient planar perovskite solar cells10.1002/aenm.201700683 ↗
14. Di-spiro-based hole-transporting materials for highly efficient perovskite solar cells10.1002/aenm.201800809 ↗
15. A highly hindered bithiophene-functionalized dispiro-oxepine derivative as an efficient hole transporting material for perovskite solar cells10.1039/C6TA09028A ↗
16. Spiro-linked organic small molecules as hole-transport materials for perovskite solar cells10.1039/C8TA08503J ↗
17. Dopant-free hole-transporting material with a C3h symmetrical truxene core for highly efficient perovskite solar cells10.1021/jacs.6b00039 ↗
18. Interface modification by ionic liquid: a promising candidate for indoor light harvesting and stability improvement of planar perovskite solar cells10.1002/aenm.201801509 ↗
19. Copper salts doped spiro-OMeTAD for high-performance perovskite solar cells10.1002/aenm.201601156 ↗
20. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
21. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
22. Interfacial engineering enables high efficiency with a high open-circuit voltage above 1.23 V in 2D perovskite solar cells10.1039/C8TA06925E ↗
23. Tailoring the interfacial chemical interaction for high-efficiency perovskite solar cells10.1021/acs.nanolett.6b04015 ↗
24. Fully printable mesoscopic perovskite solar cells with organic silane self-assembled monolayer10.1021/ja5125594 ↗
25. Supramolecular halogen bond passivation of organic-inorganic halide perovskite solar cells10.1021/nl500627x ↗
26. Polar molecules modify perovskite surface to reduce recombination in perovskite solar cells10.1039/C5RA21698B ↗
27. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
28. Defect passivation of organic-inorganic hybrid perovskites by diammonium iodide toward high-performance photovoltaic devices10.1021/acsenergylett.6b00327 ↗
29. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
30. Hysteresis-suppressed high-efficiency flexible perovskite solar cells using solid-state ionic-liquids for effective electron transport10.1002/adma.201600446 ↗
31. Sequentially fluorinated PTAA polymers for enhancing VOC of high-performance perovskite solar cells10.1002/aenm.201801668 ↗
32. Side-chain fluorination:an effective approach to achieving high-performance all-polymer solar cells with efficiency exceeding 7%10.1002/adma.201602298 ↗
33. Air and thermally stable perovskite solar cells with CVD-graphene as the blocking layer10.1039/C7NR01186E ↗
34. Low-temperature and facile solution-processed two-dimensional TiS2 as an effective electron transport layer for UV-stable planar perovskite solar cells10.1039/C8TA01143E ↗
35. Low temperature fabrication for high performance flexible CsPbI2Br perovskite solar cells10.1002/advs.201801117 ↗
36. Electric field-assisted self-organization ofpolymer:fullerene hybrids on the photovoltaic performance10.1039/c1ee01183a ↗
37. Three-Dimensional nanoscale organization of bulk heterojunction polymer solar cells10.1021/nl8014022 ↗
38. Indolo[3,2-b]indole-based crystalline hole-transporting material for highly efficient perovskite solar cells10.1039/C6SC02832B ↗
39. A two-dimensional hole-transporting material for high-performance perovskite solar cells with 20% average efficiency10.1002/anie.201806392 ↗
40. High-performance perovskite CH3NH3PbI3 thin films for solar cells prepared by single-source physical vapour deposition10.1038/srep29910 ↗
41. Enhanced performance and stability of inverted planar perovskite solar cells by incorporating 1,6-diaminohexane dihydrochloride additive10.1016/j.solmat.2018.07.031 ↗
42. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
43. Highly efficient semitransparent CsPbIBr2 perovskite solar cells via low-temperature processed In2S3 as electron-transport-layer10.1016/j.nanoen.2018.12.097 ↗
44. Extended absorption window and improved stability of cesium-based triple-cation perovskite solar cells passivated with perfluorinated organics10.1021/acsenergylett.8b00328 ↗
45. 20-mm-Large single-crystalline formamidinium-perovskite wafer for mass production of integrated photodetectors10.1002/adom.201600327 ↗
46. High-purity inorganic perovskite films for solar cells with 9.72% efficiency10.1002/ange.201800019 ↗
47. Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells10.1039/C7EE01675A ↗
48. Ionic additive engineering toward high-efficiency perovskite solar cells with reduced grain boundaries and trap density10.1002/adfm.201801985 ↗
49. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗