journal article·2017-08

Introduction of Na into Cu 2 SnS 3 thin film for improvement of its photovoltaic performances

Jakapan Chantana, Koichi Suzuki, Takashi Minemoto

Publisher page

Abstract

Abstract Impact of Na in Cu 2 SnS 3 (CTS) films on their physical properties and photovoltaic performances is investigated. CTS films are fabricated by sulfurization of NaF/Cu/SnS 2 stacked precursors. NaF precursor is used as primary Na source for Na introduction into the CTS films. It is demonstrated that Na content in the resulting CTS films is increased with enhancing thickness of NaF precursor, leading to the increase in Na/Cu atomic ratio but decrease in Cu/Sn atomic ratio. This suggests that the addition of NaF capping layer on the Cu/SnS 2 stacked precursors suppresses evaporation of Sn-S compounds from the sample during sulfurization, thus forming Sn 2 S 3 secondary. Therefore, with too thick NaF layer (greater than or equal to 75 nm), Sn 2 S 3 secondary phase in bulk and near surface of the resulting CTS films, having the detrimental effect on cell performances, is severely formed. However, the CTS grain sizes are notably enlarged as the thickness of NaF precursor increases. As a result, conversion efficiency of CTS thin-film solar cell with anti-reflective layer is increased up to 4.8% with the optimized NaF thickness of 60 nm since the single-phase and large-grain CTS absorbing layer without Sn 2 S 3 secondary phase near the surface is attained, thereby increasing open-circuit voltage and fill factor attributed to the decrease in the carrier recombination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Background and motivation for thin-film solar-cell development
2. Epitaxial thin film crystalline silicon solar cells on low cost silicon carriers
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
5. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
6. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells10.1063/1.4826448 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. Photovoltaic characteristic of thin films of Cu2SnS310.1016/0165-1633(87)90019-0 ↗
9. Thin film solar cells based on the ternary compound Cu2SnS310.1016/j.tsf.2012.05.085 ↗
10. Fabrication of Cu2SnS3 thin films by sulfurization of evaporated Cu-Sn precursors for solar cells10.1002/pssc.201200866 ↗
11. Non-toxic, earth-abundant 2% efficient Cu2SnS3 solar cell based on tetragonal films direct-coated from single metal-organic precursor solution10.1016/j.solmat.2013.02.017 ↗
12. Sulfurization temperature dependences of photovoltaic properties in Cu2SnS3-based thin-film solar cells10.7567/JJAP.53.05FW13 ↗
13. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
14. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
15. Effect of Cu deficiency on the optical bowing of chalcopyrite Cu In1-x GaxSe210.1063/1.2089154 ↗
16. Dielectric function of Cu(In, Ga)Se2-based polycrystalline materials10.1063/1.4790174 ↗
17. Investigation of compositional inhomogeneities in complex polycrystalline Cu(In,Ga)Se2 layers for solar cells10.1063/1.3280049 ↗
18. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
19. Effect of NaF coevaporation on structure properties of Cu(In,Ga)Se2 thin film10.1016/S0040-6090(03)00246-3 ↗
20. Effects of sodium on electrical properties in Cu2ZnSnS4 single crystal10.1063/1.4871208 ↗
21. Cu2SnS3 thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
22. Spray pyrolysis deposition of Sn2S3 thin films10.1088/0268-1242/11/3/025 ↗
23. Raman analysis of monoclinic Cu2SnS3 thin films
24. Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films10.1039/C3EE44130J ↗
25. Significantly Enhancing Grain Growth in Cu2ZnSn(S,Se)4 absorber layers by insetting Sb2S3,CuSbS2, and NaSb5S8 thin films10.1021/cg501589t ↗
26. The recombination parameter J010.1016/j.egypro.2014.08.073 ↗
27. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
28. Deposition of tin sulfide thin films from novel, volatile (fluoroalkythiolato)tin(iv) precursors10.1039/b005863g ↗