journal article·2017-10

PVDF-HFP additive for visible-light-semitransparent perovskite films yielding enhanced photovoltaic performance

Shuai Zhang, Yongting Lu, Bencai Lin, Yuanyuan Zhu, Kezhi Zhang, Ning-Yi Yuan, Jian-Ning Ding, Bijun Fang

Publisher page

Abstract

Abstract Organometallic halide perovskite solar cells have considerable potential to be manufactured as low-cost and visible-light-semitransparent modules by reducing the thickness of the perovskite films for building-integrated photovoltaics. However, perovskite films often suffer from voids and roughness, inducing depressed photovoltaic performance, and this problem is even more severe for thinner perovskite films. Herein, a poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) additive is incorporated into CH 3 NH 3 PbI 3 precursor solutions to control the crystal growth of a visible-light-semitransparent perovskite layer (thickness: ~150 nm) in a one-step deposition process. The characterization results show that the coverage and smoothness of the perovskite films can be significantly improved, and the perovskite crystal boundaries are also reduced by introducing a moderate amount of PVDF-HFP. When the precursor solution containing 12 mg/mL PVDF-HFP, the highest power conversion efficiencies of 10.6% and 8.8% (backward scan) is achieved for the photovoltaic devices with 80 and 20 nm-thick Au electrode, respectively, which is over 30% higher than that of the PVDF-HFP-free control. Time-resolved photoluminescence and electrochemical impedance spectroscopy characterizations further demonstrate that the PVDF-HFP additive can improve the carrier lifetimes and reduce the charge transfer resistance, which contributes to the enhanced photovoltaic performance. Thus, we propose a strategy specific to a high-quality visible-light-semitransparent perovskite layer and for high-performance perovskite solar-cell preparation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Organohalide lead perovskites for photovoltaic applications10.1039/C4EE00942H ↗
2. Formation of thin films of organic-inorganic perovskites for high-efficiency solar cells10.1002/anie.201410214 ↗
3. Perovskite thin-film solar cell: excitation in photovoltaic science10.1007/s11426-014-5289-2 ↗
4. Synthesis, structure, and properties of organic-inorganic perovskites and related materials
5. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
6. Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
7. Comparative study on the excitons in lead-halide-based perovskite-type crystals CH3NH3PbBr3 CH3NH3PbI310.1016/S0038-1098(03)00566-0 ↗
8. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
9. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
10. Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices10.1016/j.electacta.2015.02.195 ↗
11. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
12. Material parameters and perspectives for efficiency improvements in perovskite solar cells obtained by analytical modeling10.1109/JPHOTOV.2016.2627398 ↗
13. Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers10.1126/science.aah4046 ↗
14. Stability of perovskite solar cells: a prospective on the substitution of the A cation and X anion10.1002/anie.201603694 ↗
15. Perovskite-based solar cells: impact of morphology and device architecture on device performance10.1039/C4TA05226A ↗
16. Perovskite solar cells: film formation and properties10.1039/C4TA05246C ↗
17. Morphology-controlled CH3NH3PbI3 films by hexane-assisted one-step solution deposition for hybrid perovskite mesoscopic solar cells with high reproductivity10.1039/C5TA04051E ↗
18. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
19. Shunt-blocking layers for semitransparent perovskite solar cells10.1002/admi.201500837 ↗
20. Thermal behavior of methylammonium lead-trihalide perovskite photovoltaic light harvesters10.1021/cm502468k ↗
21. High-temperature shaping perovskite film crystallization for solar cell fast preparation10.1016/j.solmat.2016.10.022 ↗
22. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
23. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
24. Enhanced photovoltaic performance of perovskite solar cells using polymer P(VDF-TrFE) as a processed additive10.1021/acs.jpcc.6b05255 ↗
25. Tuning perovskite morphology by polymer additive for high efficiency solar cell10.1021/acsami.5b00052 ↗
26. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
27. NiOx electrode interlayer and CH3NH2/CH3NH3PbBr3 interface treatment to markedly advance hybrid perovskite-based light-emitting diodes10.1002/adma.201602974 ↗
28. Tailoring mixed-halide, wide-gap perovskites via multistep conversion process10.1021/acsami.6b01246 ↗
29. Construction of high performance CH3NH3PbI3-based solar cells by hot-casting technique10.1016/j.solmat.2017.01.009 ↗
30. Self-assembly of perovskite for fabrication of semitransparent perovskite solar cells10.1002/admi.201500118 ↗
31. Efficient semitransparent perovskite solar cells with graphene electrodes10.1002/adma.201501145 ↗
32. High efficiency single-junction semitransparent perovskite solar cells10.1039/C4EE01389A ↗
33. Efficient near-infrared-transparent perovskite solar cells enabling direct comparison of 4-terminal and monolithic perovskite/silicon tandem cells10.1021/acsenergylett.6b00254 ↗
34. Efficient semitransparent perovskite solar cells for 23.0%-efficiency perovskite/silicon four-terminal tandem cells10.1002/aenm.201601128 ↗
35. High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration10.1038/nenergy.2016.190 ↗
36. Chemical management for colourful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
37. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
38. Unbroken perovskite: interplay of morphology, electro-optical properties, and ionic movement10.1002/adma.201600624 ↗
39. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
40. Improvement of the humidity stability of organic-inorganic perovskite solar cells using ultrathin Al2O3 layers prepared by atomic layer deposition10.1039/C4TA06128D ↗
41. Easily accessible polymer additives for tuning the crystal-growth of perovskite thin-films for highly efficient solar cells10.1039/C6NR00206D ↗
42. Nanowires of methylammonium lead iodide (CH3NH3PbI3) prepared by low temperature solution-mediated crystallization10.1021/nl5020684 ↗
43. The mechanism of toluene-assisted crystallization of organic-inorganic perovskites for highly efficient solar cells10.1039/C6TA01087C ↗
44. Ultralong perovskite microrods: one- versus two-step synthesis and enhancement of hole-transfer during light soaking10.1021/acs.jpcc.6b03649 ↗
45. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
46. Acetate salts as nonhalogen additives to improve perovskite film morphology for high-efficiency solar cells10.1021/acsami.6b03276 ↗
47. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
48. PbI2–HMPA complex pretreatment for highly reproducible and efficient CH3NH3PbI3 perovskite solar cells10.1021/jacs.6b08347 ↗
49. Critical kinetic control of non-stoichiometric intermediate phase transformation for efficient perovskite solar cells10.1039/C6NR00488A ↗
50. Hybrid halide perovskite solar cell precursors: colloidal chemistry and coordination engineering behind device processing for high efficiency10.1021/jacs.5b00321 ↗
51. Efficiency enhancement in organic solar cells with ferroelectric polymers10.1038/nmat2951 ↗
52. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗