Effects of spectral coupling on perovskite solar cells under diverse climatic conditions
Source abstract
Abstract
Abstract The high conversion efficiency of perovskite solar cells has opened a potential market for solar cells based on low cost manufacturing techniques which could change the photovoltaic (PV) production road map. Although the 9% efficient 10 cm x 10 cm perovskite mini module has been reported, in depth analysis of the longevity of perovskite modules is required before being introduced to the market. Apart from the impressive demonstrated conversion efficiencies, these cells need to be tested under real climatic conditions in order to understand the integrity of their performance. This article briefly outlines significant spectral dependence at selected locations with varying parameters such as air mass, aerosol optical depth and precipitable water. Perovskite solar cells have shown significant dependence on the incident spectrum due to their strong absorption in the visible region. The influences of spectral variations on the performance of perovskite solar cells were studied under different atmospheric conditions. The demonstrated spectral losses by the perovskite solar cells in different climatic conditions are vital for the perovskite solar cell community to further improve their stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Recent progress and the status of dye-sensitised solar cell (DSSC) technology with state-of-the-art conversion efficiencies10.1016/j.solmat.2013.08.031 ↗
2. Perovskite solar cells keep on surging10.1126/science.344.6183.458 ↗
3. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
4. and Sang Il Seok, Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells10.1039/C4EE01216J ↗
5. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
6. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
7. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
8. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
9. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
10. Snaith, The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
11. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
12. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
13. Sol. Cells
14. Effect of spectral irradiance distribution on the oudoor performance of amorphous Si//thin-film crystalline Si stacket photovoltaic devices10.1016/j.solmat.2006.07.014 ↗
15. Estimation of irradiance and outdoor performance of phovoltaic modules by meteorological data10.1016/j.solmat.2010.01.019 ↗
16. Analysis of the dependence of the spectral factor of some PV technologies on the solar spectrum distribution10.1016/j.apenergy.2013.07.044 ↗
17. Effects of solar spectrum and module temperature on outdoor performance of photovoltaic modules in round-robin measurements in Japan10.1002/pip.995 ↗
18. Solar spectral influence on the performance of photovoltaic (PV) modules under fine weather and cloudy weather conditions10.1002/pip.1210 ↗
19. Analisys of the spectral effects on the energy yield of different PV (photovoltaic) technologies: the case of four specific sites10.1016/j.energy.2014.01.024 ↗
20. A simple method for quantifying spectral impacts on multi-junction solar cells10.1016/j.solener.2009.05.009 ↗
21. A method for using modules as temperatura sensors and its application to rating procedures10.1016/j.solmat.2011.03.030 ↗
22. Modelling the influence of atmospheric conditions on teh outdor real performance of a CPV (concentrated photovoltaics) module10.1016/j.energy.2014.03.119 ↗
23. Analysis of the spectral variations on the perfromance of high concentrator photovoltaic modules operating under different real climate conditions10.1016/j.solmat.2014.04.026 ↗
24. IEC-60904-7, Photovoltaic devices – Part 7: computation of the spectral mismatch correction for measurements of photovoltaic devices 2008.
25. ASTM G 173-03e1 Standar tables for referecence solar spectral irradiance: direct normal and hemispherical on 37 tilted surface, American society for testing and materials, pp. 1-20, 2003.
26. Voltage-dependent quantum efficiency measurements of amorphous silicon multi-junction mini-modules10.1016/j.solmat.2010.03.039 ↗
27. Effects of spectrum on the power rating of amorphous silicon photovoltaic devices10.1002/pip.1080 ↗
28. Parameterized transmittance model for direct beam and circumsolar spectral irradiance10.1016/S0038-092X(01)00054-8 ↗
29. C. Gueymard, SMARTS. A simple model of the atmospheric radiative transfer of sunshine: algorithms and performance assesstment. Profesi, Profesional paper FSEC-PF-270-95. Florida solar energy center, Cocoa, FL1995
30. C. Gueymard, Simple model of the atmospheric radiative transfer of sunshine (SMARTS) version 2.9.5, 2009.
31. Revised optical air mass tables and approximation formula10.1364/AO.28.004735 ↗
32. Aerosol Robotic Network. 〈http://aeronet.gsfc.nasa.gov/〉, 2014.
33. Techniques of determinig the turbidity of the atmosphere I10.3402/tellusa.v13i2.9493 ↗
34. Iqbal · 1983