journal article·2013-05

Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics

C. Koidis, S. Logothetidis, S. Kassavetis, C. Kapnopoulos, P.G. Karagiannidis, D. Georgiou, A. Laskarakis

Publisher page

Abstract

Roll-to-roll (R2R) gravure exhibits significant advantages such as high precision and throughput for the printing of photoactive and conductive materials and the fabrication of flexible organic electronics such as organic photovoltaics (OPVs). Since the photoactive layer is the core of the OPV, it is important to investigate and finally control the process parameters and mechanisms that define the film morphology in a R2R process. The scope of this work is to study the effect of the R2R gravure printing and drying process on the nanomorphology and nanostructure of the photoactive P3HT:PCBM thin films printed on PEDOT:PSS electrodes towards the fabrication of indium tin oxide (ITO)-free flexible OPVs. In order to achieve this, P3HT:PCBM blends of different concentration were R2R printed under various speeds on the PEDOT:PSS layers. Due to the limited drying time during the rolling, an amount of solvent remains in the P3HT:PCBM films and the slow-drying process takes place which leads to the vertical and lateral phase separation, according to the Spectroscopic Ellipsometry and Atomic Force Microscopy analysis. The enhanced slow-drying leads to stronger phase separation, larger P3HT crystallites according to the Grazing Incidence X-Ray Diffraction data and to weaker mechanical response as it was shown by the nanoindentation creep. However, in the surface of the films the P3HT crystallization is controlled by the impinged hot air during the drying, where the more the drying time the larger the surface P3HT crystallites. The integration of the printed P3HT:PCBM and PEDOT:PSS layers in an OPV device underlined the feasibility of fabricating ITO-free flexible OPVs by R2R gravure processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
3. Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing10.1063/1.4726018 ↗
4. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
5. Roll-to-roll fabrication of polymer solar cells
6. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
7. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
8. Scalability of roll-to-roll gravure-printed electrodes on plastic foils10.1109/TEPM.2010.2057512 ↗
9. Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing10.1016/j.solmat.2008.12.003 ↗
10. Micro roll-to-roll patterning process and Its application on flexible display10.1143/JJAP.48.06FC04 ↗
11. N. Espinosa, R. García-Valverde, M.S. García-Cascales, A. Urbina, Towards low-cost manufacturing of organic solar cells: multi-criteria assessment of fabrication technologies, in: Proceedings of ICREPQ'10, vol. 547, 2010.10.24084/repqj08.547 ↗
12. Modified mass printing technique for the realization of source/drain electrodes with high resolution10.1016/j.orgel.2010.07.018 ↗
13. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
14. Gravure printed flexible organic photovoltaic modules10.1016/j.solmat.2010.12.020 ↗
15. Gravure printed organic light emitting diodes for lighting applications10.1016/j.tsf.2009.03.209 ↗
16. Gravure printability of conducting polymer inks
17. Substrate treatment and drying conditions effect on the properties of roll-to-roll gravure printed PEDOT:PSS thin films10.1016/j.mseb.2011.03.007 ↗
18. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
19. Highly conductive and transparent PEDOT:PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
20. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
21. ITO-free wrap through organic solar cells-A module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
22. ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
23. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
24. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
25. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
26. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
27. Composition and annealing effects in polythiophene/fullerene solar cells10.1007/s10853-005-0568-0 ↗
28. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
29. Real-time investigation of crystallization and phase-segregation dynamics in P3HT:PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
30. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
31. In situ monitoring the drying kinetics of knife coated polymer–fullerene films for organic solar cells10.1063/1.3270402 ↗
32. Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance10.1016/j.solmat.2012.04.025 ↗
33. Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance10.1039/c2jm31277h ↗
34. Ellipsometry as a nondestructive depth profiling tool for roll-to-roll manufactured flexible solar cells10.1021/jp2004002 ↗
35. Azzam · 1977
36. Evolution of vertical phase separation in P3HT:PCBM thin films induced by thermal annealing10.1016/j.matchemphys.2011.06.007 ↗
37. Problems of contact angle and solid surface free energy determination10.1016/S0001-8686(01)00097-5 ↗
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Findley · 1975
40. Effect of roll patterns on the ink transfer in R2R printing process10.1007/s12541-009-0103-3 ↗
41. Effect of viscoelasticity on liquid transfer during gravure printing10.1016/j.jnnfm.2012.03.011 ↗
42. Analysis on the ink transfer mechanism in R2R application10.1007/s12206-009-1146-1 ↗
43. Boundary integral simulations of liquid emptying from a model gravure cell10.1063/1.2980035 ↗
44. Organic photovoltaic modules fabricated by an industrial gravure printing proofer10.1016/j.solmat.2012.10.018 ↗
45. Diffuse scattering from interface roughness in grazing-incidence x-ray diffraction10.1103/PhysRevB.54.8150 ↗
46. On the mechanism of conductivity enhancement in PEDOT/PSS film doped with multi-walled carbon nanotubes10.1007/s10965-009-9360-1 ↗
47. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
48. Cullity · 1956
49. Effect of photovoltaic polymer/fullerene blend composition ratio on microstructure evolution during film solidification investigated in real time by x-ray diffraction10.1021/ma2000338 ↗
50. Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend10.1002/aenm.201000023 ↗
51. Optical properties of hybrid polymers as barrier materials10.1016/j.apsusc.2009.05.031 ↗
52. Irene · 2005
53. Bonding structure of carbon nitride films by infrared ellipsometry10.1103/PhysRevB.64.125419 ↗
54. Study of the electronic and vibrational properties of poly(ethylene terephthalate) and poly(ethylene naphthalate) films10.1063/1.2709572 ↗
55. Ultrafast carrier dynamics on conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites10.1063/1.2785120 ↗
56. Optical properties of conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites10.1063/1.2799049 ↗
57. Harris · 1978
58. Effect of annealing on the electronic structure of poly(3-hexylthiophene) thin film10.1039/B914100F ↗
59. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
60. Vertical stratification and interfacial structure in P3HT:PCBM organic solar cells10.1021/jp104695j ↗
61. The analysis of the drying process on unsteady forced convection in thin films of ink10.1016/S1359-4311(98)00079-9 ↗
62. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
63. Vertical phase separation in poly(3-hexylthiophene):fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
64. Surface segregation at the aluminum interface of poly(3-hexylthiophene)/fullerene solar cells10.1063/1.3294290 ↗
65. Bulk heterojunction organic photovoltaics based on carboxylated polythiophenes and PCBM on glass and plastic substrates10.1002/adfm.201100049 ↗
66. Dieter · 1988
67. Transient and steady-state nanoindentation creep of polymeric materials10.1016/j.ijplas.2010.11.005 ↗
68. Analysis of nanoindentation creep for polymeric materials10.1063/1.1651341 ↗
69. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
70. Size effect on organic optoelectronics devices: example of photovoltaic cell efficiency10.1016/j.physleta.2007.09.068 ↗
71. Variations of cell performance in ITO-free organic solar cells with increasing cell areas10.1088/0268-1242/26/3/034010 ↗
72. Fabrication and optimization of P3HT:PCBM organic photovoltaic devices10.1117/12.829178 ↗
73. Influence of water on the work function of conducting poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)10.1063/1.2435350 ↗
74. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
75. Degradation patterns in water and oxygen of an Inverted polymer solar cell10.1021/ja106299g ↗