journal article·2009-11

Bulk heterojunction organic photovoltaic devices based on low band gap small molecule BTD-TNP and perylene–anthracene diimide

G.D. Sharma, P. Balraju, John A. Mikroyannidis, Minas M. Stylianakis

Publisher page

Abstract

Abstract Bulk heterojunction (BHJ) photovoltaic devices were fabricated from the blends of compounds BTD-TNP (electron donor) and P–A (electron acceptor) and characterized through current–voltage measurements under illumination. Compound BTD-TNP contains dithyenyl-benzothiadiazole central unit and cyanovinylene-p-nitrophenyl terminal moieties. Compound P–A is a symmetrical perylene–anthracene diimide with tert-butylphenoxy side groups at the 1,7-bay positions. Both the absorption spectra and the incident photon to the current conversion efficiency (IPCE) spectra of the device were extended up to 800 nm. A power conversion efficiency of 2.85% with short-circuit current density of 6.8 mA/cm2, open-circuit voltage of 0.88 V and fill factor of 0.47 were obtained. It was found that the hole and electron mobility in the active layer were about 4.6×10−5 and 8.8×10−4 cm2/Vs, respectively, which indicates the fairly balanced charge transport in the device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
6. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
7. Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics
8. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
9. Poly(2,3-dihexylthieno[3,4-b]pyrazine) via GRIM polymerization: simple preparation of a solution processable, low-band-gap conjugated polymer10.1021/ma801057s ↗
10. Photovoltaics from soluble small molecules10.1016/S1369-7021(07)70277-8 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
13. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
14. Small bandgap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
15. Poly(2,7-carbazole) and perylene tetracarboxydiimide: a promising donor/acceptor pair for polymer solar cells10.1039/B512373A ↗
16. Spectrally dependent photocurrent generation in aggregated MEH-PPV:PPDI donor–acceptor blends10.1016/j.solmat.2007.07.001 ↗
17. Effects of functional groups at perylene diimide derivatives on organic photovoltaic device application10.1039/B512983D ↗
18. Solution processable bulk-heterojunction solar cells using a small molecule acceptor10.1039/b813786m ↗
19. Efficient all-polymer solar cells based on blend of tris(thienylenevinylene)-substituted polythiophene and poly[perylene diimide-alt-bis(dithienothiophene)]10.1063/1.2975160 ↗
20. Efficient polymer solar cells based on M3EH−PPV10.1021/cm050148n ↗
21. Alternating phenylenevinylene copolymer with perylene bisimide units: synthesis, photophysical, electrochemical, and photovoltaic properties10.1021/jp901651z ↗
22. Effect of molecular packing on interfacial recombination of organic solar cells based on palladium phthalocyanine and perylene derivatives10.1063/1.3177349 ↗
23. Controlled phase separation for efficient energy conversion in dye/polymer blend bulk heterojunction photovoltaic cells10.1016/j.tsf.2009.02.082 ↗
24. Effect of addition of a diblock copolymer on blend morphology and performance of poly(3-hexylthiophene):perylene diimide solar cells10.1021/cm900911x ↗
25. Properties of heterojunction based on pentacene and perylene derivatives10.1134/S1063782609020146 ↗
26. Donor–acceptor poly(thiophene-block-perylene diimide) copolymers: synthesis and solar cell fabrication10.1021/ma801504e ↗
27. Intermolecular interactions of perylene diimides in photovoltaic blends of fluorene copolymers: disorder effects on photophysical properties, film morphology and device efficiency10.1002/adfm.200800356 ↗
28. Efficient all-polymer solar cells based on blend of tris(thienylenevinylene)-substituted polythiophene and poly[perylene diimide-alt-bis(dithienothiophene)]10.1063/1.2975160 ↗
29. P3HT/ZnO bulk-heterojunction solar cell sensitized by a perylene derivative10.1016/j.solmat.2008.01.015 ↗
30. J.A. Mikroyannidis, M.M. Stylianakis, P. Suresh, P. Balraju, G.D. Sharma, Low band gap vinylene compounds with triphenylamine and benzothiadiazole segments for use inphotovoltaic cells, Org. Electron. (2009), doi:10.1016/j.orgel.2009.07.01310.1016/j.orgel.2009.07.013 ↗
31. J.A. Mikroyannidis, M.M. Stylianakis, M.S. Roy, P. Suresh, G.D. Sharma, Synthesis, photophysics of two new perylene bisimides and their photovoltaic performances in quasi solid state dye sensitized solar cells, J. Power Sources (2009), doi:10.1016/jj.posour.2009.06.002
32. Efficient hybrid bulk heterojunction solar cells based on phenylenevinylene copolymer, perylene bisimide and TiO210.1016/j.solmat.2009.06.013 ↗
33. Universal arrhenius temperature activated charge transport in diodes from disordered organic semiconductors10.1103/PhysRevLett.100.056601 ↗
34. Optimum charge carrier mobility in organic solar cells10.1063/1.2711534 ↗
35. Electric-field and temperature dependence of the hole mobility in poly(p-phenylene vinylene)10.1103/PhysRevB.55.R656 ↗
36. Unification of the hole transport in polymeric field-effect transistors and light-emitting diodes10.1103/PhysRevLett.91.216601 ↗
37. Influence of charge carrier mobility on the performance of organic solar cells10.1002/pssr.200802110 ↗
38. Electrical and optical design and characterisation of regioregular poly(3-hexylthiophene-2,5diyl)/fullerene-based heterojunction polymer solar cells10.1016/S0379-6779(03)00027-4 ↗
39. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗