Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting
Source abstract
Abstract
Direct solar-to-hydrogen conversion via water splitting was demonstrated in an integrated photovoltaic–electrochemical (PV–EC) device using a hydrogenated amorphous silicon thin film tandem junction (a-Si:H/a-Si:H) solar cell as photocathode. The solar cell was adapted to provide sufficient photovoltage to drive both the hydrogen and oxygen evolution reactions. The best results, in terms of photoelectrochemical stability and performance, were obtained with an Ag/Pt layer stack as H2 evolving photocathode back contact and with a RuO2 counter electrode for O2 evolution. Under irradiation by simulated sunlight (AM 1.5 spectrum with 100 mW/cm2), we achieved 6.8% solar-to-hydrogen efficiency at 0 V applied bias in a two-electrode set-up. This sets a fresh benchmark for integrated thin film silicon tandem based photoelectrochemical devices. In addition, the photovoltage at constant current (−3 mA/cm2) was measured over a prolonged period of time and revealed an excellent chemical stability (operation over 50 h) of the photocathode. Furthermore, we present an empirical serial circuit model of the PV–EC device, in which the corresponding photovoltaic and electrochemical components are decoupled. This allows for a detailed comparison between the solar cell and the PV–EC cell characteristics, from which the relevant loss processes in the overall system could be identified. The model was further used to compare calculated and measured photocurrent–voltage characteristics of the investigated PV–EC device which showed excellent agreement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Copper-based nanomaterials and applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Grimes · 2008
2. Will solar-driven water-splitting devices see the light of day?10.1021/cm4021518 ↗
3. Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0603395103 ↗
4. E. Miller, White papers on materials for photoelectrochemical water splitting, DOE PEC Working Group, 2013. Available at 〈http://energy.gov/eere/fuelcells/downloads/white-papers-materials-photoelectrochemical-water-splitting〉.
5. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
6. Introduction to solar photon conversion10.1021/cr1003419 ↗
7. An overview of photocells and photoreactors for photoelectrochemical water splitting10.1016/j.ijhydene.2010.02.133 ↗
8. Van de Krol · 2012
9. Silicon protected with atomic layer deposited TiO2: durability studies of photocathodic H2 evolution10.1039/c3ra45966g ↗
10. Efficient p‐InP(Rh‐ Halloy) and p‐InP(Re‐ Halloy) hydrogen evolving photocathodes10.1149/1.2123695 ↗
11. Formation of a p–n heterojunction on GaP photocathodes for H2 production providing an open-circuit voltage of 710mV10.1039/C4TA00752B ↗
12. A monolithic photovoltaic–photoelectrochemical device for hydrogen production via water splitting10.1126/science.280.5362.425 ↗
13. Enabling silicon for solar-fuel production10.1021/cr300459q ↗
14. Hydrogen production using a molybdenum sulfide catalyst on a titanium-protected n+p-silicon photocathode10.1002/anie.201203585 ↗
15. Improvement of photoelectrochemical hydrogen generation by surface modification of p-type silicon semiconductor photocathodes10.1021/ja00366a016 ↗
16. Layer-type transition metal dichalcogenides—a new class of electrodes for electrochemical solar cells10.1002/bbpc.19770810403 ↗
17. Hole reactions from d‐energy bands of layer type group VI transition metal dichalcogenides: new perspectives for electrochemical solar energy conversion10.1149/1.2131625 ↗
18. Further studies of the photoelectrochemical properties of the group VI transition metal dichalcogenides10.1016/0165-1633(82)90039-9 ↗
19. Hydrogen evolution from Pt/Ru-coated p-Type WSe2 photocathodes10.1021/ja308581g ↗
20. A monolithic device for solar water splitting based on series interconnected thin film absorbers reaching over 10% solar-to-hydrogen efficiency10.1039/c3ee42519c ↗
21. Solar water splitting: progress using hematite (α-Fe2O3) photoelectrodes10.1002/cssc.201000416 ↗
22. Towards highly efficient photoanodes: boosting sunlight-driven semiconductor nanomaterials for water oxidation10.1039/c4nr01181c ↗
23. Efficient solar water splitting by enhanced charge separation in a bismuth vanadate-silicon tandem photoelectrode10.1038/ncomms3195 ↗
24. An analysis of the optimal band gaps of light absorbers in integrated tandem photoelectrochemical water-splitting systems10.1039/c3ee40453f ↗
25. Limiting and realizable efficiencies of solar photolysis of water10.1038/316495a0 ↗
26. Efficiency of splitting water with semiconducting photoelectrodes10.1149/1.2115797 ↗
27. Over 18% solar energy conversion to generation of hydrogen fuel; theory and experiment for efficient solar water splitting10.1016/S0360-3199(00)00133-6 ↗
28. Wireless solar water splitting using silicon-based semiconductors and earth-abundant catalysts10.1126/science.1209816 ↗
29. Optimization of amorphous silicon double junction solar cells for an efficient photoelectrochemical water splitting device based on a bismuth vanadate photoanode10.1039/C3CP55035D ↗
30. A hybrid multijunction photoelectrode for hydrogen production fabricated with amorphous silicon/germanium and iron oxide thin films10.1016/j.ijhydene.2003.01.003 ↗
31. Shah · 2008
32. Development of thin film amorphous silicon tandem junction based photocathodes providing high open-circuit voltages for hydrogen production10.1155/2014/249317 ↗
33. Texture-etched ZnO as a versatile base for optical back reflectors with well-designed surface morphologies for application in thin film solar cells10.1002/pssa.201127676 ↗
34. Photoelectrochemical cell measurements: getting the basics right10.1021/jz300220b ↗
35. The influence of operation temperature on the output properties of amorphous silicon-related solar cells10.1016/j.solmat.2004.04.016 ↗
36. Accelerating materials development for photoelectrochemical hydrogen production: standards for methods, definitions, and reporting protocols10.1557/JMR.2010.0020 ↗
37. Solar water splitting cells10.1021/cr1002326 ↗
38. Chen · 2013
39. H2 evolution at Si-based metal-insulator-semiconductor photoelectrodes enhanced by inversion channel charge collection and H spillover10.1038/nmat3626 ↗
40. Modeling integrated photovoltaic–electrochemical devices using steady-state equivalent circuits10.1073/pnas.1301532110 ↗
41. Theory and simulations of electrocatalyst-coated semiconductor electrodes for solar water splitting10.1103/PhysRevLett.112.148304 ↗
42. Comparison between the measured and modeled hydrogen-evolution activity of Ni- or Pt-coated silicon photocathodes10.1016/j.ijhydene.2013.12.162 ↗
43. Photoelectrochemical and photovoltaic characteristics of amorphous-silicon-based tandem cells as photocathodes for water splitting10.1002/cphc.201402552 ↗
44. Bard · 2001
45. Photocatalytic water splitting: recent progress and future challenges10.1021/jz1007966 ↗
46. Protection of p+-n-Si Photoanodes by Sputter-Deposited Ir/IrOx Thin Films10.1021/jz500865g ↗
47. 2-Photon tandem device for water splitting: comparing photocathode first versus photoanode first designs10.1039/C4EE01335B ↗