Intense pulsed light processing for photovoltaic manufacturing
Source abstract
Abstract
Abstract The solar manufacturing industry continues to expand and become a key source of energy as manufacturing costs have decreased. This has led to a rapid growth in revenue and a corresponding drop in margins that has suppliers implementing solutions to further reduce the costs associated with manufacturing solar panels. Despite these improvements, solar energy derived from photovoltaics still has an energy pay-back time of at least one year with some of this is associated with heating processes. To further reduce costs, a new technology called intense pulsed light is being implemented to eliminate expensive high energy thermal processes and encourage higher throughput. The technology also includes opportunities for devices that contain thermally limited materials. The technique was originally explored when the photovoltaic industry was quite small, and has only recently begun to gather interest as the printed electronics industry realized gains. This review discusses the use of intense pulsed light in photovoltaic manufacturing, detailing the process from a photonic physics perspective, the relevant heat transfer mechanisms, as well as its impact on the major photovoltaic sectors. Demonstrations of generation 1: crystalline silicon solar cells, generation 2: thin film solar cells, and emerging technologies: hybrid organic solar cell applications are discussed. Lastly, future outlooks for intense pulsed light in the photovoltaic manufacturing sector are offered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · solar cell performance optimization · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Photovoltaic learning rate estimation: issues and implications10.1016/j.rser.2016.06.070 ↗
2. Beyond the learning curve: factors influencing cost reductions in photovoltaics10.1016/j.enpol.2005.06.020 ↗
3. Energy payback time (EPBT) and energy return on energy invested (EROI) of solar photovoltaic systems: a systematic review and meta-analysis10.1016/j.rser.2015.02.057 ↗
4. Energy payback time and carbon footprint of commercial photovoltaic systems10.1016/j.solmat.2013.08.037 ↗
5. A wafer-based monocrystalline silicon photovoltaics road map: utilizing known technology improvement opportunities for further reductions in manufacturing costs10.1016/j.solmat.2013.01.030 ↗
6. Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costs10.1039/c2ee03489a ↗
7. An analysis of glass–glass CIGS manufacturing costs10.1016/j.solmat.2016.04.029 ↗
8. Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts10.1039/C5EE00615E ↗
9. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
10. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
11. Flash light sintering of nickel nanoparticles for printed electronics10.1016/j.tsf.2013.11.075 ↗
12. Intense pulsed light sintering of copper nanoink for printed electronics10.1007/s00339-009-5360-6 ↗
13. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40% bulk silver conductivity in less than 15 s10.1002/adma.201104417 ↗
14. Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes10.1039/c2jm32977h ↗
15. Sintering of inkjet-printed silver nanoparticles at room temperature using intense pulsed light10.1007/s11664-011-1711-0 ↗
16. Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate10.1088/0960-1317/21/12/125023 ↗
17. Conductive nanomaterials for printed electronics10.1002/smll.201303000 ↗
18. Optimisation of manufacturing parameters for inkjet-printed and photonically sintered metallic nanoparticle UHF RFID tags10.1049/el.2014.2194 ↗
19. Photonic flash sintering of silver nanoparticl inks: a fast and convenient method for the preparation of highly conductive structires on foil10.1557/mrc.2012.28 ↗
20. Temperature changes of copper nanoparticle ink during flash light sintering10.1016/j.jmatprotec.2014.06.007 ↗
21. Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices10.1039/C4TC01820F ↗
22. Pathways for solar photovoltaics10.1039/C4EE04073B ↗
23. A.R. Kirkpatrick, Method Involving Pulsed Light Processing of Semiconductor Devices, U.S. Patent, 4,151,008, 24 Apr, 1979.
24. A review of thermal processing in the subsecond range: semiconductors and beyond10.1088/0268-1242/31/10/103001 ↗
25. K.A. Schroder, Mechanisms of Photonic Curing: Processing High Temperature Films on Low Temperature Substrates, NSTI Nanotech-2011, 2011.10.4071/isom-2011-THA4-Paper6 ↗
26. Pierret · 2002
27. Ink-jet printing and camera flash sintering of silver tracks on different substrates10.1016/j.jmatprotec.2010.08.014 ↗
28. In situ monitoring of a flash light sintering process using silver nano-ink for producing flexible electronics10.1088/0957-4484/24/3/035202 ↗
29. Extremely flexible, printable Ag conductive features on PET and paper substrates via continuous millisecond photonic sintering in a large area10.1039/C4TC01422G ↗
30. Reactive sintering of copper nanoparticles using intense pulsed light for printed electronics10.1007/s11664-010-1384-0 ↗
31. In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics10.1088/0957-4484/23/48/485205 ↗
32. Cu salt ink formulation for printed electronics using photonic sintering10.1021/la402026r ↗
33. Multi-pulsed white light sintering of printed Cu nanoinks10.1088/0957-4484/22/39/395705 ↗
34. Highly conductive copper nano/microparticles ink via flash light sintering for printed electronics10.1088/0957-4484/25/26/265601 ↗
35. Cu ion ink for a flexible substrate and highly conductive patterning by intensive pulsed light sintering10.1021/am303268k ↗
36. Intensive plasmonic flash light sintering of copper nanoinks using a band-pass light filter for highly electrically conductive electrodes in printed electronics10.1021/acsami.5b12516 ↗
37. Inkjet fabrication of copper patterns for flexible electronics: using paper with active precoatings10.1021/acsami.5b03061 ↗
38. Low-thermal-budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks: potential for flexible printed electronics10.1021/acsami.5b12156 ↗
39. Newly designed Cu/Cu10Sn3core/shell nanoparticles for liquid phase-photonic sintered copper electrodes: large-area, low-cost transparent flexible electronics10.1021/acs.chemmater.6b01709 ↗
40. Hybrid copper-silver conductive tracks for enhanced oxidation resistance under flash light sintering10.1021/acsami.6b07826 ↗
41. A highly reliable copper nanowire/nanoparticle ink pattern with high conductivity on flexible substrate prepared via a flash light-sintering technique10.1021/am506765p ↗
42. Photoenhanced patterning of metal nanowire networks for fabrication of ultraflexible transparent devices10.1021/acsami.5b09386 ↗
43. One-step fabrication of stretchable copper nanowire conductors by a fast photonic sintering technique and its application in wearable devices10.1021/acsami.5b10802 ↗
44. Photonic welding of ultra-long copper nanowire network for flexible transparent electrodes using white flash light sintering10.1039/C5RA25548A ↗
45. Copper nanoparticle/multiwalled carbon nanotube composite films with high electrical conductivity and fatigue resistance fabricated via flash light sintering10.1021/acsami.5b08112 ↗
46. Improved optical sintering efficiency at the contacts of silver nanowires encapsulated by a graphene layer10.1002/smll.201402474 ↗
47. Room temperature synthesis of a copper ink for the intense pulsed light sintering of conductive copper films10.1021/am404226e ↗
48. Room temperature synthesis of a copper ink for the intense pulsed light sintering of conductive copper films10.1021/am404226e ↗
49. Fabrication of elemental copper by intense pulsed light processing of a copper nitrate hydroxide ink10.1021/acsami.5b03854 ↗
50. Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds10.1021/am404581b ↗
51. Photonic sintering of copper through the controlled reduction of printed CuO nanocrystals10.1021/acsami.5b08430 ↗
52. Optimum flash lamp annealing conditions for fabrication of low dose ion-implanted Si solar cells10.1109/EDL.1984.25881 ↗
53. Selection of material for the back electrodes of thin-film solar cells using polycrystalline silicon films formed by flash lamp annealing10.1143/JJAP.49.04DP04 ↗
54. Rapid sintering of TiO2 photoelectrodes using intense pulsed white light for flexible dye-sensitized solar cells10.1063/1.4871370 ↗
55. Photonic sintering of a ZnO nanosheet photoanode using flash white light combined with deep UV irradiation for dye-sensitized solar cells10.1039/C6RA26815C ↗
56. Photonic flash sintering of ink-jet-printed back electrodes for organic photovoltaic applications10.1021/acsami.5b11394 ↗
57. Intense pulsed light annealed buffer layers for organic photovoltaics10.1016/j.solmat.2015.07.046 ↗
58. Photonic sintering of inkjet printed current collecting grids for organic solar cell applications10.1016/j.orgel.2012.10.012 ↗
59. Photonic flash-annealing of lead halide perovskite solar cells in 1 ms10.1039/C5TA09431C ↗
60. Intense pulsed light sintering of CH3NH3PbI3 solar cells10.1021/acsami.5b10166 ↗
61. Roll-to-roll inkjet printing and photonic sintering of electrodes for ITO free polymer solar cell modules and facile product integration10.1002/aenm.201200520 ↗
62. Rapid flash annealing of thermally reactive copolymers in a roll-to-roll process for polymer solar cells10.1039/c2py20429k ↗
63. A.R. Kirkpatrick, Method Involving Pulsed Beam Processing of Metallic and Dielectric Materials, U.S. Patent, 4,229,232, 21 Oct, 1980.
64. Phosphorus in-diffusion from a surface source by millisecond flash lamp annealing for shallow emitter solar cells10.1063/1.4800781 ↗
65. Millisecond annealing for advanced doping of dirty-silicon solar cells10.1063/1.4729812 ↗
66. Solar cell emitters fabricated by flash lamp millisecond annealing10.12693/APhysPolA.120.30 ↗
67. Formation of shallow boron emitters in crystalline silicon using flash lamp annealing: role of excess silicon interstitials10.1063/1.4926661 ↗
68. Comparison of the impact of thermal treatment on the second and on the millisecond scales on the precipitation of interstitial oxygen10.1149/05005.0145ecst ↗
69. D. Hui, G.J. Griffiths, Conductive Compositions and Methods Relating Thereto, U.S. Patent, 14/268,202, 27 Nov, 2014.
70. K. Vanheusden, F. Lemmi, D. Poplavskyy, M. Terry, M. Abbott, Methods for Forming Composite Nanoparticle-Metal Metallization Contacts on a Substrate, U.S. Patent, 7,704,866, 27 Apr, 2010.
71. Solution phase synthesis and intense pulsed light sintering and reduction of a copper oxide ink with an encapsulating nickel oxide barrier10.1088/0957-4484/26/17/175601 ↗
72. Impact of ink synthesis on processing of inkjet-printed silicon nanoparticle thin films: a comparison of Rapid Thermal Annealing and photonic sintering10.1016/j.tsf.2014.11.079 ↗
73. M. Kelman, F. Lemmi, Method for Fabrication of Semiconductor Thin Films Using Flash Lamp Processing, U.S. Patent, 11/875,261, 26 Feb, 2009.
74. H. Antoniadis, F. Jiang, W. Shan, Y. Liu, All screen printed mass produced silicon ink selective emitter solar cells, in: Proceedings of Photovoltaics Specialists Conference, 2010.10.1109/PVSC.2010.5614092 ↗
75. Formation of highly uniform micrometer-order-thick polycrystalline silicon films by flash lamp annealing of amorphous silicon on glass substrates10.1143/JJAP.46.7603 ↗
76. Formation of several-micrometer-thick polycrystalline silicon films on soda lime glass by flash lamp annealing10.1143/JJAP.47.8239 ↗
77. Explosive crystallization of amorphous silicon films by flash lamp annealing10.1063/1.3195089 ↗
78. Drastic improvement of minority carrier lifetimes observed in hydrogen-passivated flash-lamp-crystallized polycrystalline silicon films10.1143/APEX.2.061201 ↗
79. Precursor Cat-CVD a-Si films for the formation of high-quality poly-Si films on glass substrates by flash lamp annealing10.1016/j.tsf.2009.01.075 ↗
80. Hydrogen engineering via plasma immersion ion implantation and flash lamp annealing in silicon-based solar cell substrates10.1063/1.4865737 ↗
81. Thin-film polycrystalline silicon solar cells formed by flash lamp annealing of a-Si films10.1016/j.tsf.2010.03.008 ↗
82. Ultrasonic spray coating and flash lamp annealing of silicon nanoparticle dispersions for silicon thin film formation10.1007/s10853-014-8505-8 ↗
83. Flash lamp annealing of spray coated films containing oxidized or hydrogen terminated silicon nanoparticles10.1016/j.tsf.2014.04.081 ↗
84. Optimization of the post-deposition annealing process of high-mobility In2O3:H for photovoltaic applications10.1016/j.tsf.2015.12.054 ↗
85. Intense pulsed light sintering of electrodeposited CdS thin films10.1002/adem.201400008 ↗
86. Intense pulsed light treatment of cadmium telluride nanoparticle-based thin films10.1021/am500124t ↗
87. Processing of CdTe thin films by intense pulsed light in the presence of CdCl210.1007/s11998-015-9688-x ↗
88. Cu(In,Ga)Se2 thin film preparation from a Cu(In,Ga) metallic alloy and Se nanoparticles by an intense pulsed light technique10.1007/s11664-010-1431-x ↗
89. Rapid treatment of CIGS particles by intense pulsed light10.1016/j.jpcs.2010.07.016 ↗
90. Formulation and characterization of CuIn1-xGaxSe2 Ink for Gravure Offset Printing10.7567/JJAP.52.05DB17 ↗
91. Photonic sintering of thin film prepared by dodecylamine capped CuInxGa1−xSe2 nanoparticles for printed photovoltaics10.1016/j.tsf.2014.06.036 ↗
92. Influence of flash lamp annealing on the optical properties of CIGS layer10.12693/APhysPolA.125.1404 ↗
93. Intense pulsed light annealing of copper zinc tin sulfide nanocrystal coatings10.1116/1.4961661 ↗
94. Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique10.1039/c2jm35545k ↗
95. Highly stretchable and mechanically stable transparent electrode based on composite of silver nanowires and polyurethane-urea10.1021/acsami.5b04693 ↗
96. Polymer nanocomposite thin film mirror for the infrared region10.1002/smll.200700680 ↗
97. Anti-reflective optical coatings incorporating nanoparticles10.1088/0957-4484/16/7/005 ↗
98. Ultra-fast photonic curing of electrically conductive adhesives fabricated from vinyl ester resin and silver micro-flakes for printed electronics10.1039/C4RA00292J ↗
99. Low thermal budget, photonic-cured compact TiO2 layers for high-efficiency perovskite solar cells10.1039/C6TA02105K ↗
100. Study on cobalt doped tin based perovskite material with enhanced air stability10.1016/j.mssp.2016.09.029 ↗