journal article·2018-08

Boosting the efficiency of AgInSe2 quantum dot sensitized solar cells via core/shell/shell architecture

Mulu Alemayehu Abate, Jia-Yaw Chang

Publisher page

Abstract

Abstract Interfacial engineering of the photoanode has been one of the most important strategies in designing high-performance quantum dot (QD)-sensitized solar cells (QDSSCs). In this work, we demonstrated a promising route to enhance the photovoltaic performance by inserting an additional CdS inner shell between AgInSe2 (AISe) QDs and a ZnS outer shell to obtain an AISe/CdS/ZnS core/shell/shell QDSSC. These double passivation shells prevent current leakage from the QDs to the electrolyte. The results of electrochemical impedance spectroscopy confirmed that the CdS/ZnS double passivation shell in the AISe QDSSC contributes greatly to suppression of charge recombination. As a result, the AISe QDSSC with CdS/ZnS double passivation shells exhibited a remarkably high conversion efficiency (6.27%), which is significantly higher than those of devices without a passivation shell (1.02%) and with CdS (4.37%) or ZnS (5.23%) single passivation shells. To the best of the authors’ knowledge, this efficiency is one of the highest values obtained for an Ag-based QDSSC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. High efficiency CdS/CdSe quantum dot sensitized solar cells with two ZnSe layers10.1021/acsami.6b12842 ↗
2. Effect of sodium acetate additive in successive ionic layer adsorption and reaction on the performance of CdS quantum-dot-sensitized solar cells10.1016/j.jpowsour.2016.06.095 ↗
3. Impacts of surface or interface chemistry of ZnSe passivation layer on the performance of CdS/CdSe quantum dot sensitized solar cells10.1016/j.nanoen.2016.12.047 ↗
4. Doubling the power conversion efficiency in CdS/CdSe quantum dot sensitized solar cells with a ZnSe passivation layer10.1016/j.nanoen.2016.05.012 ↗
5. Mn-doped quantum dot sensitized solar cells: a strategy to boost efficiency over 5%10.1021/ja211224s ↗
6. InAs/InGaP quantum dot solar cells with an AlGaAs interlayer10.1016/j.solmat.2015.08.031 ↗
7. Advanced architecture for colloidal PbS quantum dot solar cells exploiting a CdSe quantum dot buffer layer10.1021/acsnano.6b03175 ↗
8. Multinary I-III-VI2 and I2-II-IV-VI4 semiconductor nanostructures for photocatalytic applications10.1021/acs.accounts.5b00535 ↗
9. Significantly enhanced energy conversion efficiency of CuInS2 quantum dot sensitized solar cells by controlling surface defects10.1016/j.nanoen.2017.03.008 ↗
10. Copper–indium–selenide quantum dot-sensitized solar cells10.1039/c3cp54270j ↗
11. Synthesis and photophysical properties of ternary I–III–VI AgInS2 nanocrystals: intrinsic versus surface states10.1021/jp2011183 ↗
12. Large-scale synthesis of water-soluble CuInSe2/ZnS and AgInSe2/ZnS core/shell quantum dots10.1039/C5GC00908A ↗
13. Synthesis of eco-friendly CuInS2 quantum dot-sensitized solar cells by a combined ex situ/in situ growth approach10.1021/am403531q ↗
14. Toward the facile and ecofriendly fabrication of quantum dot-sensitized solar cells via thiol coadsorbent assistance10.1021/acsami.6b05411 ↗
15. Amorphous TiO2 buffer layer boosts efficiency of quantum dot sensitized solar cells to over 9%10.1021/acs.chemmater.5b03864 ↗
16. Charge recombination control for high efficiency quantum dot sensitized solar cells10.1021/acs.jpclett.5b02153 ↗
17. A ZnS and metal hydroxide composite passivation layer for recombination control in high efficiency quantum dot sensitized solar cells10.1039/C6TA08717E ↗
18. Synthetic strategies and biomedical applications of I-III-VI ternary quantum dots10.1039/C7TB01156C ↗
19. Ternary AgInSe2 film electrode created using selenization of RF magnetron sputtered Ag–In metal precursor for photoelectrochemical applications10.1016/j.ijhydene.2012.02.044 ↗
20. The correlation of γ-irradiation, particle size and their effects on physical properties of AgInSe2 nanostructure thin films10.1016/j.mssp.2016.07.023 ↗
21. Synthesis and characterization of AgInSe2 for application in thin film solar cells10.1016/j.tsf.2007.02.054 ↗
22. Shape-controlled synthesis of water-soluble AgInSe2 nanocrystals by a convenient solvothermal approach10.1016/j.matlet.2015.09.005 ↗
23. Alloying strategy in Cu-In-Ga-Se quantum dots for high efficiency quantum dot sensitized solar cells10.1021/acsami.6b14649 ↗
24. Zn-Cu-In-Se quantum dot solar cells with a certified power conversion efficiency of 11.6%10.1021/jacs.6b00615 ↗
25. Widely controllable electronic energy structure of ZnSe–AgInSe2 solid solution nanocrystals for quantum-dot-sensitized solar cells10.1021/jp508769f ↗
26. AgInS2–ZnS quantum dots: excited state interactions with TiO2 and photovoltaic performance10.1021/acsami.6b14604 ↗
27. Synthesis of AgInS2 quantum dots with tunable photoluminescence for sensitized solar cells10.1016/j.jpowsour.2016.11.101 ↗
28. Zinc-diffused silver indium selenide quantum dot sensitized solar cells with enhanced photoconversion efficiency10.1039/C7TA00268H ↗
29. Boosting the cell efficiency of CdSe quantum dot sensitized solar cell via a modified ZnS post-treatment10.1016/j.electacta.2013.07.220 ↗
30. Improved photovoltaic performance and stability of quantum dot sensitized solar cells using Mn–ZnSe shell structure with enhanced light absorption and recombination control10.1039/C5NR03291A ↗
31. High performance of TiO2/CdS quantum dot sensitized solar cells with a Cu–ZnS passivation layer10.1039/C6NJ03898K ↗
32. Mat Web, material property data. 〈http://www.matweb.com/search/QuickText.aspx/〉, (Accessed mid 1990's).
33. Direct aqueous synthesis of quantum dots for high-performance AgInSe2 quantum-dot-sensitized solar cell10.1016/j.jpowsour.2017.04.040 ↗
34. Building up strain in colloidal metal nanoparticle catalysts10.1039/C5NR02529J ↗
35. Reliable evaluation of dye-sensitized solar cells10.1039/C2EE22998F ↗
36. Multilayered semiconductor (CdS/CdSe/ZnS)-sensitized TiO2 mesoporous solar cells: all prepared by successive ionic layer adsorption and reaction processes10.1021/cm102024s ↗
37. Fumed SiO2 modified electrolytes for quantum dot sensitized solar cells with efficiency exceeding 11% and better stability10.1039/C6TA04570G ↗
38. Poly(vinyl pyrrolidone): a superior and general additive in polysulfide electrolytes for high efficiency quantum dot sensitized solar cells10.1039/C6TA04027F ↗
39. Performance enhancement of quantum dot sensitized solar cells by adding electrolyte additives10.1039/C5TA04758G ↗
40. Nitrogen-doped mesoporous carbons as counter electrodes in quantum dot sensitized solar cells with a conversion efficiency exceeding 12%10.1021/acs.jpclett.6b02864 ↗