A theoretical study on Sb2S3 solar cells: The path to overcome the efficiency barrier of 8%
Source abstract
Abstract
Abstract Sb2S3 semiconductor is among the absorber materials that have currently received an increased attention from scientific community since it presents adequate physical properties for solar cell fabrication. In addition, it is also based on abundant and relatively low-toxic elements. Nevertheless, so far, Sb2S3 solar cells in planar configuration are limited to efficiency values lower than 8%, being mechanisms behind such low performances still unknown. In this work we perform theoretical calculations to study the impact of recombination mechanisms at both Sb2S3 bulk material and Sb2S3/CdS interface on solar cells, in order to explain low efficiencies reported for this technology, for the first time. The comparison of model outcomes to the experimental data reported in the literature demonstrates good correspondence. It is found that current Sb2S3 solar cells are dominated by a combination of factors such as non-ideal series and shunt resistances, Sb2S3 non-radiative recombination and Sb2S3/CdS interface recombination. By improving Sb2S3/CdS interface and Sb2S3 bulk material quality, a solar cell efficiency of 11.8% could be achieved, which is limited by the effect of series and shunt resistances. Therefore, the same attention should be paid to both defects and resistances to promote device efficiency over 12%, achieving a new record value of 18.4%. Conditions under which each loss mechanism is dominant are presented and discussed. Finally, it is demonstrated that under optimized conditions and with the use of an antireflection coating layer, an efficiency about 20% is expected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Solar cell efficiency tables (version 52)10.1002/pip.3040 ↗
2. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
3. A review of perovskites solar cell stability
4. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
5. Toward high‐efficiency solution‐processed planar heterojunction Sb2S3 solar cells10.1002/advs.201500059 ↗
6. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
7. Hydrazine solution processed Sb2S3, Sb2Se3 and Sb2(S1−xSex)3 film: molecular precursor identification, film fabrication and band gap tuning
8. Secondary phases dependence on composition ratio in sprayed Cu2ZnSnS4 thin films and its impact on the high power conversion efficiency10.1016/j.solmat.2013.06.008 ↗
9. Development of antimony sulfide–selenide Sb2(S, Se)3-based solar cells10.1016/j.jechem.2017.09.031 ↗
10. Stable and efficient CdS/Sb2Se3 solar cells prepared by scalable close space sublimation10.1016/j.nanoen.2018.04.044 ↗
11. Over 6% certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization10.1002/aelm.201800683 ↗
12. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
13. Promising Sb2(S,Se)3 solar cells with high open voltage by application of a TiO2/CdS double buffer layer
14. Review of recent progress in antimony chalcogenide-based solar cells: materials and devices
15. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
16. Towards understanding poor performances in spray-deposited Cu2ZnSnS4 thin film solar cells10.1016/j.solmat.2016.09.004 ↗
17. Loss mechanisms influence on Cu2ZnSnS4/CdS-based thin film solar cell performance10.1016/j.sse.2015.05.038 ↗
18. Open-circuit voltage enhancement in CdS/Cu2ZnSnSe4-based thin film solar cells: a metal–insulator–semiconductor (MIS) performance10.1016/j.solmat.2016.01.027 ↗
19. The role of buffer/kesterite interface recombination and minority carrier lifetime on kesterite thin film solar cells10.1088/2053-1591/3/9/095501 ↗
20. Sb2(S1−xSex)3 solar cells: the impact of radiative and non-radiative loss mechanisms10.1088/1361-6463/aaddea ↗
21. Harold · 1975
22. Gray · 2011
23. Peter · 2005
24. CZe · 2002
25. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
26. Efficient and stable TiO2/Sb2S3 planar solar cells from absorber crystallization and Se-atmosphere annealing10.1016/j.mtener.2017.02.001 ↗
27. Efficient double buffer layer Sb2(SexS1–x)3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗
28. Vapor transport deposition of antimony selenidethin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
29. Investigation of electronic transport mechanisms in Sb2Se3 thin-film solar cells10.1016/j.solmat.2019.04.003 ↗
30. Improving the efficiency of Sb2Se3 thin-film solar cells by post annealing treatment in vacuum condition10.1016/j.solmat.2018.08.006 ↗
31. Courel · 2018
32. Singh · 2003
33. Unraveling the native conduction of trichalcogenides and its ideal band Alignment for new photovoltaic interfaces10.1021/acs.jpcc.5b10233 ↗
34. CdS/Sb2S3 heterojunction thin film solar cells with thermally-evaporated absorber10.1039/C7TC02460F ↗
35. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
36. Electrical properties of point defects in CdS and ZnS10.1063/1.4819492 ↗
37. Trap and recombination centers study in sprayed Cu2ZnSnS4 thin films10.1063/1.4897232 ↗
38. A new recombination model for device simulation including tunneling10.1109/16.121690 ↗
39. A new analytical diode model including tunneling and avalanche breakdown10.1109/16.155882 ↗
40. Tunneling-enhanced recombination in CuInGaSe2 heterojunction solar cells10.1063/1.122967 ↗
41. Compositional dependence of the optical properties of amorphous Sb2Se3−xSx thin films10.1016/j.jnoncrysol.2008.05.004 ↗
42. Structural analysis, electronic and optical properties of the synthesizedSb2S3 nanowires with small band gap10.1088/0268-1242/29/3/035007 ↗
43. Shafarman · 2011 · 546
44. Optical properties of zinc-oxide films determined using spectroscopic ellipsometry with various dispersion models10.3938/jkps.55.1227 ↗
45. Optical properties of wurtzite CdS10.1063/1.360355 ↗
46. Wolfram Research Inc · 2007
47. Towards a CdS/Cu2ZnSnS4 solar cell efficiency improvement: a theoretical approach10.1063/1.4903826 ↗
48. Systematic control of nanostructured interfaces of planar Sb2S3 solar cells by simple spin-coating process and its effect on photovoltaic properties10.1016/j.jiec.2017.07.012 ↗
49. Review on substrate and molybdenum back contact in CIGS thin film solar cell
50. The formation of the MoSe2 layer at Mo/CIGS interface and its effect on the CIGS device performance
51. Controlled formation of MoSe2 by MoNx thin film as a diffusion barrier against Se during selenization annealing for CIGS solar cell10.1016/j.jallcom.2015.04.120 ↗
52. A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2014.04.016 ↗
53. Numerical analysis of the back interface for high efficiency wide band gap chalcopyrite solar cells10.1016/j.solener.2019.01.018 ↗
54. Effect of a TiN alkali diffusion barrier layer on the physical properties of Mo back electrodes for CIGS solar cell applications10.1016/j.cap.2017.08.021 ↗
55. Fermi level pinning and effects on CuInGaSe2-based thin-film solar cells10.1088/0268-1242/24/5/055016 ↗
56. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗