journal article·2019-09

Effect of physical and environmental factors on the performance of a photovoltaic panel

Shahzada Pamir Aly, Said Ahzi, Nicolas Barth

Publisher page

Abstract

Abstract The electrical performance of a photovoltaic (PV) panel is based on its power conversion efficiency, which is inversely proportional to its operating temperature. Using a self-developed numerical thermal model, the performance of a silicon-based one-sun commercial PV panel has been analyzed by varying different physical and environmental factors. The physical factors considered, for each layer inside a typical PV panel, are the specific heat capacity, density, thermal conductivity, irradiance absorptance, thickness and finally, the often-neglected thermal contact resistance at the interface of each layer. The considered environmental factors are the ambient temperature, incident irradiance, wind speed and the mounting configuration of the PV panel. After adequately validating the developed thermal model, it was used for both steady-state and transient analyses, by varying each of the aforementioned factors one by one. These analyses provide a very detailed representation of the effect of each factor on the PV performance. Using these results, a PV designer can focus on the key areas of the PV panel's composition to maximize its output.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Variations of PV module parameters with irradiance and temperature10.1016/j.egypro.2017.09.617 ↗
2. Temperature dependence of semiconductor band gaps10.1063/1.104723 ↗
3. Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world – a review10.1016/j.egypro.2013.05.072 ↗
4. On the temperature dependence of photovoltaic module electrical performance : a review of efficiency /power correlations10.1016/j.solener.2008.10.008 ↗
5. Simplified method for predicting photovoltaic array output10.1016/0038-092X(81)90051-7 ↗
6. A review on recent development for the design and packaging of hybrid photovoltaic/thermal (PV/T) solar systems10.1016/j.rser.2018.07.013 ↗
7. Review on recent Photovoltaic/Thermal (PV/T) technology advances and applications10.1016/j.solener.2018.08.032 ↗
8. Mitigating the effect of heat and dust to enhance solar panels efficiency
9. Operating temperature of photovoltaic modules: a survey of pertinent correlations10.1016/j.renene.2008.04.009 ↗
10. Wind effect on PV module temperature: analysis of different techniques for an accurate estimation10.1016/j.egypro.2013.08.010 ↗
11. Using energy balance method to study the thermal behavior of PV panels under time-varying field conditions10.1016/j.enconman.2018.09.007 ↗
12. Modelling of a double-glass photovoltaic module using finite differences10.1016/j.applthermaleng.2005.02.008 ↗
13. A computational analysis of coupled thermal and electrical behavior of PV panels10.1016/j.solmat.2015.09.004 ↗
14. An improved multi-layer thermal model for photovoltaic modules
15. A thermal model for photovoltaic panels under varying atmospheric conditions10.1016/j.applthermaleng.2010.03.012 ↗
16. Dynamic coupled thermal-and-electrical modelling of sheet-and-tube hybrid photovoltaic/thermal (PVT) collectors
17. Finite element thermal analysis of a solar photovoltaic module10.1016/j.egypro.2012.02.050 ↗
18. Three-dimensional thermal modeling of a photovoltaic module under varying conditions10.1016/j.solener.2012.05.034 ↗
19. A three-dimensional finite element based dynamic thermal model of PV modules with an improved thermal network
20. Two-dimensional finite difference-based model for coupled irradiation and heat transfer in photovoltaic modules10.1016/j.solmat.2017.06.055 ↗
21. A fully transient novel thermal model for in-field photovoltaic modules using developed explicit and implicit finite difference schemes10.1016/j.jocs.2017.12.013 ↗
22. A numerical study for approximating cells temperature inside a PV module
23. Sharp Corporation · 2009
24. Multi-physics modeling and simulation of heat and electrical yield generation in photovoltaics10.1016/j.solmat.2017.07.039 ↗
25. Natural convection adjacent to horizontal surface of various planforms10.1115/1.3450224 ↗
26. Effect of finite width on heat transfer and fluid flow about an inclined rectangular plate10.1115/1.3450946 ↗
27. Sky temperature modelisation and applications in building simulation10.1016/S0960-1481(98)00198-0 ↗
28. The lamination of (multi) crystalline and thin film based photovoltaic modules10.1002/pip.993 ↗
29. Finite element thermal stress analysis of a solar photovoltaic module
30. Factors that affect the EVA encapsulant discoloration rate upon accelerated exposure10.1016/0927-0248(95)00128-X ↗
31. Materials testing for PV module encapsulation
32. Adhesion strength study of EVA encapsulants on glass substrates
33. Novel dry cleaning machine for photovoltaic and solar panels
34. Thermal contact conductance10.1016/0017-9310(69)90011-8 ↗
35. Babu · 2015