CuSbSe2 thin film solar cells with ~4% conversion efficiency grown by low-temperature pulsed electron deposition
Source abstract
Abstract
CuSb(S,Se)2 is emerging as an alternative absorber for thin film photovoltaics, for its intrinsic p-type conductivity, tunable energy bandgap (1.0÷1.6 eV), high absorption coefficient > 104 cm-1 and very low cost of the constituent elements. In this work, we studied the structural, compositional and electro-optical properties of CuSbSe2 (CASe) films grown by Low Temperature Pulsed Electron Deposition (LTPED), a developing technology in thin film photovoltaics. We proved that stoichiometric or Cu-poor CASe films can be obtained at low temperature (< 200 °C) from a stoichiometric target with no need for post-deposition treatments to adjust the stoichiometry. Solar cells based on Cu-poor and stoichiometric CASe absorbers exhibit a similar open circuit voltage (~290÷310 mV), while the JSC increases from ~3 mA/cm2 up to ~20 mA/cm2 as the Cu/Sb ratio increases from 0.55 to 0.95. A low FF ~40% still limits the performance of all the cells indicating that the standard architecture of thin film solar cells, currently used for CIGS and CdTe devices, need to be significantly reviewed. The results of the structural and optoelectrical characterization presented in this paper show that JSC, VOC and FF can all be improved as a result of the optimization of the device architecture. The best of the LTPED-grown CASe cells obtained so far, reached an efficiency of 3.8%, very close to the state of the art reported so far in literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Green · 1982
2. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
3. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
4. Towards sustainable photovoltaics: the search for new materials10.1098/rsta.2010.0348 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Thermoelectric properties of CuSbSe2 and its doped compounds by Ti and Pb at low temperatures from 5 to 310K10.1063/1.2218592 ↗
7. Ternary CuSbSe2 chalcostibite: facile synthesis, electronic-structure and thermoelectric performance enhancement10.1039/C6TA00039H ↗
8. Optical properties and electronic structures of CuSbS2, CuSbSe2, and CuSb(S1-xSex)2 solid solution10.1002/pssc.201600196 ↗
9. Inverse design of high absorption thin-film photovoltaic materials10.1002/aenm.201200538 ↗
10. Cu(Sb,Bi)(S,Se)2 as indium-free absorber material with high optical efficiency10.1016/j.egypro.2013.12.025 ↗
11. Structural and electronic properties of CuSbS2 and CuBiS2: potential absorber materials for thin-film solar cells10.1039/c2cp40916j ↗
12. CuSbSe2 as a potential photovoltaic absorber material: studies from theory to experiment10.1002/aenm.201501203 ↗
13. Thin film solar cell based on CuSbS2 absorber prepared by chemical bath deposition (CBD)10.1016/j.materresbull.2016.11.028 ↗
14. Optical and structural properties of CuSbS2 thin films grown by thermal evaporation method10.1016/j.tsf.2008.11.021 ↗
15. Development of phase-pure CuSbS2 thin films by annealing thermally evaporated CuS/Sb2S3 stacking layer for solar cell applications10.1016/j.mssp.2018.02.029 ↗
16. Growth and characterization of chalcostibite CuSbSe2 thin films for photovoltaic application10.1016/j.apsusc.2017.01.279 ↗
17. One-step electrodeposition and annealing of CuSbSe2 thin films10.1149/2.007202esl ↗
18. Preparation of CuSbS2 thin films by a facile and low-cost chemical solution method
19. Self-regulated growth and tunable properties of CuSbS2 solar absorbers10.1016/j.solmat.2014.09.041 ↗
20. Thin film solar cell based on CuSbS2 absorber fabricated from an electrochemically deposited metal stack10.1016/j.tsf.2013.11.046 ↗
21. CuSbS2 -sensitized inorganic-organic heterojunction solar cells fabricated using a metal-thiourea complex Solution10.1002/anie.201411329 ↗
22. Trade-offs in thin film solar cells with layered chalcostibite photovoltaic absorbers10.1002/aenm.201601935 ↗
23. Pulsed Electron-Beam Deposition of High Temperature Superconducting Films for Coated Conductor Applications
24. Progress on low-temperature pulsed electron deposition of CuInGaSe2 solar cells10.3390/en9030207 ↗
25. Growth of Cu(In,Ga)Se2 thin films by a novel single-stage route based on pulsed electron deposition
26. Dynamics of evaporation from CuGaSe2 targets in pulsed electron deposition technique10.1088/0022-3727/46/24/245101 ↗
27. Low-temperature growth of single-crystal Cu(In,Ga)Se2 films by pulsed electron deposition technique10.1016/j.solmat.2014.10.048 ↗
28. 15% efficient Cu(In,Ga)Se2 solar cells obtained by low-temperature pulsed electron deposition10.1063/1.4755772 ↗
29. A new process for synthesizing high-purity stoichiometric cadmium telluride10.1016/S0022-0248(00)00042-7 ↗
30. Role of substrate temperature on the structural, morphological and optical properties of CuGaSe2 thin films grown by Pulsed Electron Deposition technique10.1016/j.tsf.2012.07.126 ↗
31. Observation of two distinct components during pulsed laser deposition of high Tc superconducting films10.1063/1.99673 ↗
32. Growth and characterization of CuSbS2 crystals10.1007/BF02670850 ↗
33. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
34. Depth profile of impurity phase in wide-bandgap Cu(In1-x,Gax)Se2 film fabricated by three-stage process
35. Accelerated development of CuSbS2 thin film photovoltaic device prototypes10.1002/pip.2735 ↗
36. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
37. CuSbSe2 photovoltaic devices with 3% efficiency10.7567/APEX.8.082301 ↗
38. First-principles study of electronic structure of CuSbS2 and CuSbSe2 photovoltaic semiconductors10.1016/j.tsf.2014.11.089 ↗
39. Crystallographic and optical properties of CuSbS2 and CuSb(S1-xSex)2 solid solution10.1016/j.tsf.2014.11.029 ↗
40. Thermally activated band conduction and variable range hopping conduction in Cu2ZnSnS4 thin films10.1063/1.4905673 ↗
41. Characterization of defects in copper antimony disulfide10.1039/C7TA07012H ↗
42. L. Soliman, Structural and electrical properties of CuSbTe2, CuSbSe2 and CuSbS2 chalcogenide thin films, FIZIKA A 11 (n.d.) 139–152.
43. Conduction in glasses containing transition metal ions10.1016/0022-3093(68)90002-1 ↗
44. Solution-processed CuSbS2 solar cells based on metal–organic molecular solution precursors10.1007/s10853-017-1663-8 ↗
45. Effects of thermochemical treatment on CuSbS2 photovoltaic absorber quality and solar cell reproducibility10.1021/acs.jpcc.6b04206 ↗
46. Defect studies in Cu2ZnSnSe4 and Cu2ZnSn(Se0.75S0.25)4 by admittance and photoluminescence spectroscopy10.1016/j.mssp.2013.02.009 ↗
47. Role of deep levels and interface states in the capacitance characteristics of all‐sputtered CuInSe2 /CdS solar cell heterojunctions10.1063/1.342676 ↗
48. Effects of series resistance and inductance on solar cell admittance measurements10.1016/0927-0248(95)00016-X ↗
49. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
50. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
51. Electronic loss mechanisms in chalcopyrite based heterojunction solar cells10.1016/S0040-6090(99)00762-2 ↗