journal article·2017-08Open access

Using ISOS consensus test protocols for development of quantitative life test models in ageing of organic solar cells

J. Kettle, V. Stoichkov, D. Kumar, M. Corazza, S.A. Gevorgyan, F.C. Krebs

Abstract

As Organic Photovoltaic (OPV) development matures, the demand grows for rapid characterisation of degradation and application of Quantitative Accelerated Life Tests (QALT) models to predict and improve reliability. To date, most accelerated testing on OPVs has been conducted using ISOS consensus standards. This paper identifies some of the problems in using and interpreting the results for predicting ageing based upon ISOS consensus standard test data. Design of Experiments (DOE) in conjunction with data from ISOS consensus standards are used as the basis for developing life test models for OPV modules. This is used to study their temperature-humidity and light-induced degradation, which enables failure rates during accelerated testing to be assessed against the typical outdoor operational conditions. The life test models are used to assess the relative severity of the ISOS standards and the impact of geographic and seasonal climatic changes on OPV degradation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
2. See infinityPV ‘HeLi-on’ 〈https://infinitypv.com/products/heli-on〉.
3. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
4. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
5. Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics10.1016/j.solmat.2015.09.037 ↗
6. The state of organic solar cells—A meta analysis10.1016/j.solmat.2013.05.034 ↗
7. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
8. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
9. An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors10.1016/j.solmat.2011.02.013 ↗
10. Accelerated weathering testing principles to estimate the service life of organic PV modules10.1016/j.solmat.2010.08.033 ↗
11. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
12. Comparing the degradation of organic photovoltaic devices under ISOS testing protocols10.1016/j.solmat.2015.12.032 ↗
13. Effect of processing additive 1, 8-octanedithiol on the lifetime of PCPDTBT based Organic Photovoltaics10.1016/j.orgel.2014.06.031 ↗
14. Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests10.1016/j.solmat.2014.06.031 ↗
15. See InfinityPV for more details website 〈https://infinitypv.com/〉.
16. Outdoor performance of organic photovoltaics: diurnal analysis, dependence on temperature, irradiance, and degradation10.1063/1.4906915 ↗
17. Three dimensional corrugated organic photovoltaics for building integration; improving the efficiency, oblique angle and diffuse performance of solar cells10.1039/C5EE02162F ↗