journal article·2014-08

Electrical characterization method for bifacial photovoltaic modules

Jai Prakash Singh, Armin G. Aberle, Timothy M. Walsh

Publisher page

Abstract

Abstract We present a method to characterize bifacial photovoltaic (PV) modules for simultaneous front and rear side illumination (i.e., bifacial illumination). The method uses standard monofacial (i.e., single-sided) indoor current–voltage measurements on the front and rear sides of the bifacial module, while covering the other side with a non-reflecting black cover. To define the performance under bifacial illumination, new bifacial parameters (short-circuit current, open-circuit voltage, fill factor and efficiency) are calculated using a one-diode model of the PV module. Assuming linear current response of PV modules for different illuminations, the method numerically simulates the performance of bifacial PV modules for various combinations of front and rear side irradiances. The method is useful in predicting the behavior of the bifacial PV module under bifacial illumination, without actually measuring the module under these conditions. Using a silicon wafer based bifacial PV module, we demonstrate experimentally that the method can predict the performance to within 1% variation with actual measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. N.P. Harder, Simplified cost analysis of n-type high efficiency solar cells, in: Proceedings of the 21st nPV workshop, Amsterdam, 2012.
2. A novel high-efficiency rear-contact solar cell with bifacial sensitivity
3. 50% more output power from an albedo-collecting flat panel using bifacial solar cells10.1016/0038-092X(82)90078-0 ↗
4. L. Kreinin, N. Bordin, A. Karsenty, A. Drori, D. Grobgeld, N. Eisenberg, PV module power gain due to bifacial design: preliminary experimental and simulation data, Conference Record of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 2171–2175.10.1109/PVSC.2010.5615874 ↗
5. J.P. Singh, T.M. Walsh, A.G. Aberle, Performance investigation of bifacial PV modules in the tropics, Conference Record of the 27th European Photovoltaic Solar Energy Conference (EU PVSEC), 2012, pp. 3263–3266.
6. IEC Standard 60904-3: Photovoltaic Devices, Part 3: Measurement Principles for Terrestrial Photovoltaic (PV) Solar Devices with Reference Spectral Irradiance Data, International Electrotechnical Commission, 2008.
7. Measurement and Characterization of Solar Cells and Modules
8. 〈http://us.sanyo.com/dynamic/product/Downloads/solarPower_HIT_Double_195_Data_Sheet-13054720.pdf〉 (accessed 20.09.13).
9. 〈http://www.prismsolar.com/products.php〉 (accessed 20.09.13).
10. 〈http://www.advancedsolarphotonics.com/solar-energy-products/monocyrstalline-pv-modules/bifacial-series-glass-to-glass-photovoltaic-module〉 (accessed 20.09.13).
11. Characteristics of bifacial solar cells under bifacial illumination with various intensity levels10.1002/pip.336 ↗
12. A. Edler, M. Schlemmer, J. Ranzmeyer, R. Harney, Flasher setup for bifacial measurements, bifiPV workshop, Konstanz, 2012.
13. K.R. McIntosh, C.B. Honsberg, S.R. Wenham, The impact of rear illumination on bifacial solar cells with floating junction passivation, in: Proceedings of the 2nd World Conference and Exhibition on Photovoltaic Solar Energy Conversion, Vienna, 1998, pp. 1515–1518.
14. J.A. del Cueto, S.R. Rummel, Comparison of diode quality plus other factors in polycrystalline cells and modules from outdoor and indoor measurements, Conference Record of the 31st IEEE Photovoltaic Specialists Conference, 2005, pp. 511–514.10.1109/PVSC.2005.1488182 ↗
15. A new method to characterize bifacial solar cells
16. Crystalline silicon cell performance at low light intensities10.1016/j.solmat.2009.03.018 ↗